lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Fri, 11 Jun 2021 09:15:18 +0200 From: Oleksij Rempel <o.rempel@...gutronix.de> To: Woojung Huh <woojung.huh@...rochip.com>, UNGLinuxDriver@...rochip.com, Andrew Lunn <andrew@...n.ch>, Florian Fainelli <f.fainelli@...il.com>, Vivien Didelot <vivien.didelot@...il.com>, Vladimir Oltean <olteanv@...il.com>, "David S. Miller" <davem@...emloft.net>, Jakub Kicinski <kuba@...nel.org> Cc: Oleksij Rempel <o.rempel@...gutronix.de>, kernel@...gutronix.de, netdev@...r.kernel.org, linux-kernel@...r.kernel.org, Russell King <linux@...linux.org.uk>, Michael Grzeschik <m.grzeschik@...gutronix.de> Subject: [PATCH net-next v4 0/9] provide cable test support for the ksz886x switch changes v4: - use fallthrough; - use EOPNOTSUPP instead of ENOTSUPP - drop flags variable in dsa_slave_phy_connect patch - extend description for the "net: phy: micrel: apply resume errat" patch - fix "use consistent alignments" patch changes v3: - remove RFC tag changes v2: - use generic MII_* defines where possible - rework phylink validate - remove phylink get state function - reorder cabletest patches to make PHY flag patch in the right order - fix MDI-X detection This patches provide support for cable testing on the ksz886x switches. Since it has one special port, we needed to add phylink with validation and extra quirk for the PHY to signal, that one port will not provide valid cable testing reports. Michael Grzeschik (2): net: phy: micrel: move phy reg offsets to common header net: dsa: microchip: ksz8795: add phylink support Oleksij Rempel (7): net: phy: micrel: use consistent alignments net: phy: micrel: apply resume errata workaround for ksz8873 and ksz8863 net: phy/dsa micrel/ksz886x add MDI-X support net: phy: micrel: ksz8081 add MDI-X support net: dsa: microchip: ksz8795: add LINK_MD register support net: dsa: dsa_slave_phy_connect(): extend phy's flags with port specific phy flags net: phy: micrel: ksz886x/ksz8081: add cabletest support drivers/net/dsa/microchip/ksz8795.c | 214 ++++++++---- drivers/net/dsa/microchip/ksz8795_reg.h | 67 +--- drivers/net/ethernet/micrel/ksz884x.c | 105 +----- drivers/net/phy/micrel.c | 423 ++++++++++++++++++++++-- include/linux/micrel_phy.h | 16 + net/dsa/slave.c | 4 + 6 files changed, 593 insertions(+), 236 deletions(-) -- 2.29.2
Powered by blists - more mailing lists