[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAOMZO5CNjpek0vkDrMyTmfbnr2cLcquck6QQBqXLBiyTDKPXvA@mail.gmail.com>
Date: Fri, 11 Jun 2021 10:51:04 -0300
From: Fabio Estevam <festevam@...il.com>
To: Robin Gong <yibin.gong@....com>
Cc: Vinod <vkoul@...nel.org>, Mark Rutland <mark.rutland@....com>,
Mark Brown <broonie@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Martin Fuzzey <martin.fuzzey@...wbird.group>,
Uwe Kleine-König
<u.kleine-koenig@...gutronix.de>,
Dan Williams <dan.j.williams@...el.com>,
Matthias Schiffer <matthias.schiffer@...tq-group.com>,
Schrempf Frieder <frieder.schrempf@...tron.de>,
Marco Felsch <m.felsch@...gutronix.de>,
Clark Wang <xiaoning.wang@....com>,
linux-spi <linux-spi@...r.kernel.org>,
linux-kernel <linux-kernel@...r.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
<linux-arm-kernel@...ts.infradead.org>,
Sascha Hauer <kernel@...gutronix.de>,
dmaengine@...r.kernel.org, NXP Linux Team <linux-imx@....com>
Subject: Re: [PATCH v14 00/12] add ecspi ERR009165 for i.mx6/7 soc family
Hi Robin,
On Wed, Apr 7, 2021 at 4:15 AM Robin Gong <yibin.gong@....com> wrote:
>
> There is ecspi ERR009165 on i.mx6/7 soc family, which cause FIFO
> transfer to be send twice in DMA mode. Please get more information from:
> https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf. The workaround is adding
> new sdma ram script which works in XCH mode as PIO inside sdma instead
> of SMC mode, meanwhile, 'TX_THRESHOLD' should be 0. The issue should be
> exist on all legacy i.mx6/7 soc family before i.mx6ul.
> NXP fix this design issue from i.mx6ul, so newer chips including i.mx6ul/
> 6ull/6sll do not need this workaroud anymore. All other i.mx6/7/8 chips
> still need this workaroud. This patch set add new 'fsl,imx6ul-ecspi'
> for ecspi driver and 'ecspi_fixed' in sdma driver to choose if need errata
> or not.
> The first two reverted patches should be the same issue, though, it
> seems 'fixed' by changing to other shp script. Hope Sean or Sascha could
> have the chance to test this patch set if could fix their issues.
> Besides, enable sdma support for i.mx8mm/8mq and fix ecspi1 not work
> on i.mx8mm because the event id is zero.
>
> PS:
> Please get sdma firmware from below linux-firmware and copy it to your
> local rootfs /lib/firmware/imx/sdma.
> https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/imx/sdma
Without this series, SPI DMA does not work on i.MX8MM:
[ 41.315984] spi_master spi1: I/O Error in DMA RX
I applied your series and SPI DMA works now:
Reviewed-by: Fabio Estevam <festevam@...il.com>
Thanks
Powered by blists - more mailing lists