| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 10 Jun 2021 21:25:54 -0500
From: Bjorn Andersson <bjorn.andersson@...aro.org>
To: Bhupesh Sharma <bhupesh.sharma@...aro.org>
Cc: linux-arm-msm@...r.kernel.org,
Linus Walleij <linus.walleij@...aro.org>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>, Vinod Koul <vkoul@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Andy Gross <agross@...nel.org>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-gpio@...r.kernel.org,
bhupesh.linux@...il.com
Subject: Re: [PATCH 8/8] arm64: dts: qcom: sa8155p-adp: Add base dts file
On Mon 07 Jun 06:38 CDT 2021, Bhupesh Sharma wrote:
> Add base DTS file for sa8155p-adp and enable boot to console,
Please spell out "sa8155-adp", i.e. "Add base DTS for SA8155p Automotive
Development Platform."
> tlmm reserved range and also include pmic file(s).
>
> SA8155p-adp board is based on sm8150 Qualcomm Snapdragon SoC.
>
It's not based on sm8150, it's based on sa8155p, so let's express this
as "The SA8155p platform is similar to the SM8150, so use this as base
for now", to document why we decided to do this.
> Cc: Linus Walleij <linus.walleij@...aro.org>
> Cc: Liam Girdwood <lgirdwood@...il.com>
> Cc: Mark Brown <broonie@...nel.org>
> Cc: Bjorn Andersson <bjorn.andersson@...aro.org>
> Cc: Vinod Koul <vkoul@...nel.org>
> Cc: Rob Herring <robh+dt@...nel.org>
> Cc: Andy Gross <agross@...nel.org>
> Cc: devicetree@...r.kernel.org
> Cc: linux-kernel@...r.kernel.org
> Cc: linux-gpio@...r.kernel.org
> Cc: bhupesh.linux@...il.com
This would go into the git history as "I specifically asked for input
from these people", so please keep this list shorter (but for a change
like this it's probably better to omit it completely)
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@...aro.org>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 363 +++++++++++++++++++++++
> 2 files changed, 364 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/sa8155p-adp.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 456502aeee49..38d3a4728871 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -71,6 +71,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8250-hdk.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8350-hdk.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
> new file mode 100644
> index 000000000000..470d740e060a
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
> @@ -0,0 +1,363 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2021, Linaro Limited
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include "sm8150.dtsi"
> +#include "pmm8155au_1.dtsi"
> +#include "pmm8155au_2.dtsi"
> +
> +/ {
> + model = "Qualcomm Technologies, Inc. SA8155P ADP";
> + compatible = "qcom,sa8155p-adp";
> +
> + aliases {
> + serial0 = &uart2;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + vreg_3p3: vreg_3p3_regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vreg_3p3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + /*
> + * Apparently RPMh does not provide support for PM8150 S4 because it
> + * is always-on; model it as a fixed regulator.
> + */
You can reduce this to
/* S4A is always on and not controllable through RPMh */
> + vreg_s4a_1p8: smps4 {
> + compatible = "regulator-fixed";
> + regulator-name = "vreg_s4a_1p8";
> +
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + regulator-always-on;
> + regulator-boot-on;
> +
> + vin-supply = <&vreg_3p3>;
> + };
> +};
> +
> +&apps_rsc {
> + pmm8155au-1-rpmh-regulators {
> + compatible = "qcom,pmm8155au-1-rpmh-regulators";
> + qcom,pmic-id = "a";
> +
> + vdd-s1-supply = <&vreg_3p3>;
> + vdd-s2-supply = <&vreg_3p3>;
> + vdd-s3-supply = <&vreg_3p3>;
> + vdd-s4-supply = <&vreg_3p3>;
> + vdd-s5-supply = <&vreg_3p3>;
> + vdd-s6-supply = <&vreg_3p3>;
> + vdd-s7-supply = <&vreg_3p3>;
> + vdd-s8-supply = <&vreg_3p3>;
> + vdd-s9-supply = <&vreg_3p3>;
> + vdd-s10-supply = <&vreg_3p3>;
> +
> + vdd-l1-l8-l11-supply = <&vreg_s6a_0p92>;
> + vdd-l2-l10-supply = <&vreg_3p3>;
> + vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p92>;
> + vdd-l6-l9-supply = <&vreg_s6a_0p92>;
> + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
> + vdd-l13-l16-l17-supply = <&vreg_3p3>;
> +
> + vreg_s5a_2p04: smps5 {
> + regulator-min-microvolt = <1904000>;
> + regulator-max-microvolt = <2000000>;
> + };
> +
> + vreg_s6a_0p92: smps6 {
> + regulator-min-microvolt = <920000>;
> + regulator-max-microvolt = <1128000>;
> + };
> +
> + vdda_wcss_pll:
This is the "label" of the pad which the regulator typically is
connected to (rather than a denotion of which regulator it is). So even
though we have these in some of the other boards, I would prefer if you
skip them and only use the vreg_xyz_abc variant.
> + vreg_l1a_0p752: ldo1 {
> + regulator-min-microvolt = <752000>;
> + regulator-max-microvolt = <752000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
[..]
> +&usb_1_dwc3 {
> + dr_mode = "peripheral";
We have enough pieces to handle mode switching on this platform, but as
discussed, lets leave it as "peripheral" until your local setup is back
online.
Thanks,
Bjorn
> +};
> +
> +&qupv3_id_1 {
> + status = "okay";
> +};
> --
> 2.31.1
>
Powered by blists - more mailing lists