| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210611165937.701-8-cristian.marussi@arm.com>
Date: Fri, 11 Jun 2021 17:59:28 +0100
From: Cristian Marussi <cristian.marussi@....com>
To: linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
virtualization@...ts.linux-foundation.org,
virtio-dev@...ts.oasis-open.org
Cc: sudeep.holla@....com, james.quinlan@...adcom.com,
Jonathan.Cameron@...wei.com, f.fainelli@...il.com,
etienne.carriere@...aro.org, vincent.guittot@...aro.org,
souvik.chakravarty@....com, cristian.marussi@....com,
igor.skalkin@...nsynergy.com, peter.hilber@...nsynergy.com,
alex.bennee@...aro.org, jean-philippe@...aro.org,
mikhail.golubev@...nsynergy.com, anton.yakovlev@...nsynergy.com,
Vasyl.Vavrychuk@...nsynergy.com,
Andriy.Tryshnivskyy@...nsynergy.com
Subject: [PATCH v4 07/16] firmware: arm_scmi: Add op to override max message #
From: Igor Skalkin <igor.skalkin@...nsynergy.com>
The number of simultaneously pending messages that the upcoming
scmi-virtio transport can support depends on the virtio device (SCMI
platform) and can differ for each channel. (The scmi-virtio transport
does only have one tx and at most 1 rx channel.)
Add an optional transport op so that scmi-virtio can report the actual
max message # for each channel type. Respect these new limits.
Reflect that the limit in struct scmi_desc is now only a default any
more.
[ Peter: Adapted patch for submission to upstream. ]
Co-developed-by: Peter Hilber <peter.hilber@...nsynergy.com>
Signed-off-by: Igor Skalkin <igor.skalkin@...nsynergy.com>
Signed-off-by: Peter Hilber <peter.hilber@...nsynergy.com>
---
drivers/firmware/arm_scmi/common.h | 9 ++++++--
drivers/firmware/arm_scmi/driver.c | 34 ++++++++++++++++++++++++------
2 files changed, 34 insertions(+), 9 deletions(-)
diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h
index 4666777019fa..253a218fe16a 100644
--- a/drivers/firmware/arm_scmi/common.h
+++ b/drivers/firmware/arm_scmi/common.h
@@ -319,6 +319,9 @@ struct scmi_chan_info {
* @chan_available: Callback to check if channel is available or not
* @chan_setup: Callback to allocate and setup a channel
* @chan_free: Callback to free a channel
+ * @get_max_msg: Optional callback to provide max_msg dynamically
+ * @return: Maximum number of messages for the channel type (tx or rx)
+ * that can be pending simultaneously in the system
* @send_message: Callback to send a message
* @mark_txdone: Callback to mark tx as done
* @fetch_response: Callback to fetch response
@@ -331,6 +334,7 @@ struct scmi_transport_ops {
int (*chan_setup)(struct scmi_chan_info *cinfo, struct device *dev,
bool tx);
int (*chan_free)(int id, void *p, void *data);
+ unsigned int (*get_max_msg)(bool tx, struct scmi_chan_info *base_cinfo);
int (*send_message)(struct scmi_chan_info *cinfo,
struct scmi_xfer *xfer);
void (*mark_txdone)(struct scmi_chan_info *cinfo, int ret);
@@ -358,8 +362,9 @@ struct scmi_device *scmi_child_dev_find(struct device *parent,
* after SCMI core removal.
* @ops: Pointer to the transport specific ops structure
* @max_rx_timeout_ms: Timeout for communication with SoC (in Milliseconds)
- * @max_msg: Maximum number of messages that can be pending
- * simultaneously in the system
+ * @max_msg: Maximum number of messages for a channel type (tx or rx) that can
+ * be pending simultaneously in the system. May be overridden by the
+ * get_max_msg op.
* @max_msg_size: Maximum size of data per message that can be handled.
* @support_xfers_delegation: A flag to indicate if the described transport
* will handle delegated xfers, so the core can
diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index 371d3804cd79..fdd711d85498 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -75,6 +75,7 @@ struct scmi_requested_dev {
* Index of this bitmap table is also used for message
* sequence identifier.
* @xfer_lock: Protection for message allocation
+ * @max_msg: Maximum number of messages that can be pending
* @last_token: A counter to use as base to generate for monotonically
* increasing tokens.
* @free_xfers: A free list for available to use xfers. It is initialized with
@@ -86,6 +87,7 @@ struct scmi_requested_dev {
struct scmi_xfers_info {
unsigned long *xfer_alloc_table;
spinlock_t xfer_lock;
+ int max_msg;
atomic_t last_token;
struct hlist_head free_xfers;
DECLARE_HASHTABLE(pending_xfers, SCMI_PENDING_XFERS_HT_ORDER_SZ);
@@ -1310,18 +1312,25 @@ int scmi_handle_put(const struct scmi_handle *handle)
}
static int __scmi_xfer_info_init(struct scmi_info *sinfo,
- struct scmi_xfers_info *info)
+ struct scmi_xfers_info *info,
+ bool tx,
+ struct scmi_chan_info *base_cinfo)
{
int i;
struct scmi_xfer *xfer;
struct device *dev = sinfo->dev;
const struct scmi_desc *desc = sinfo->desc;
+ info->max_msg = desc->max_msg;
+
+ if (desc->ops->get_max_msg)
+ info->max_msg = desc->ops->get_max_msg(tx, base_cinfo);
+
/* Pre-allocated messages, no more than what hdr.seq can support */
- if (WARN_ON(!desc->max_msg || desc->max_msg > MSG_TOKEN_MAX)) {
+ if (WARN_ON(!info->max_msg || info->max_msg > MSG_TOKEN_MAX)) {
dev_err(dev,
"Invalid max_msg %d. Maximum messages supported %ld.\n",
- desc->max_msg, MSG_TOKEN_MAX);
+ info->max_msg, MSG_TOKEN_MAX);
return -EINVAL;
}
@@ -1339,7 +1348,7 @@ static int __scmi_xfer_info_init(struct scmi_info *sinfo,
* attach all of them to the free list
*/
INIT_HLIST_HEAD(&info->free_xfers);
- for (i = 0; i < desc->max_msg; i++) {
+ for (i = 0; i < info->max_msg; i++) {
xfer = devm_kzalloc(dev, sizeof(*xfer), GFP_KERNEL);
if (!xfer)
return -ENOMEM;
@@ -1364,10 +1373,21 @@ static int __scmi_xfer_info_init(struct scmi_info *sinfo,
static int scmi_xfer_info_init(struct scmi_info *sinfo)
{
- int ret = __scmi_xfer_info_init(sinfo, &sinfo->tx_minfo);
+ int ret;
+ struct scmi_chan_info *base_tx_cinfo;
+ struct scmi_chan_info *base_rx_cinfo;
+
+ base_tx_cinfo = idr_find(&sinfo->tx_idr, SCMI_PROTOCOL_BASE);
+ if (unlikely(!base_tx_cinfo))
+ return -EINVAL;
+
+ ret = __scmi_xfer_info_init(sinfo, &sinfo->tx_minfo, true,
+ base_tx_cinfo);
- if (!ret && idr_find(&sinfo->rx_idr, SCMI_PROTOCOL_BASE))
- ret = __scmi_xfer_info_init(sinfo, &sinfo->rx_minfo);
+ base_rx_cinfo = idr_find(&sinfo->rx_idr, SCMI_PROTOCOL_BASE);
+ if (!ret && base_rx_cinfo)
+ ret = __scmi_xfer_info_init(sinfo, &sinfo->rx_minfo, false,
+ base_rx_cinfo);
return ret;
}
--
2.17.1
Powered by blists - more mailing lists