| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20210612011436.10437-2-grygorii.strashko@ti.com>
Date: Sat, 12 Jun 2021 04:14:22 +0300
From: Grygorii Strashko <grygorii.strashko@...com>
To: Tony Lindgren <tony@...mide.com>
CC: Lokesh Vutla <lokeshvutla@...com>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>,
Vignesh Raghavendra <vigneshr@...com>,
<linux-omap@...r.kernel.org>,
Grygorii Strashko <grygorii.strashko@...com>,
Yegor Yefremov <yegorslists@...glemail.com>,
Christina Quast <cquast@...overdisplays.com>
Subject: [PATCH next 01/15] ARM: dts: am335x-baltos: switch to new cpsw switch drv
The dual_mac mode has been preserved the same way between legacy and new
driver, and one port devices works the same as 1 dual_mac port - it's safe
to switch drivers.
So, switch OnRISC Baltos and NetCom/Cam boards to use new cpsw switch
driver. Those boards have or 2 Ext. port wired and configured in dual_mac
mode by default, or only 1 Ext. port.
Cc: Yegor Yefremov <yegorslists@...glemail.com>
Cc: Christina Quast <cquast@...overdisplays.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@...com>
---
arch/arm/boot/dts/am335x-baltos-ir2110.dts | 10 +++++-----
arch/arm/boot/dts/am335x-baltos-ir3220.dts | 8 ++++----
arch/arm/boot/dts/am335x-baltos-ir5221.dts | 8 ++++----
arch/arm/boot/dts/am335x-baltos.dtsi | 5 ++---
arch/arm/boot/dts/am335x-netcan-plus-1xx.dts | 10 +++++-----
arch/arm/boot/dts/am335x-netcom-plus-2xx.dts | 10 +++++-----
arch/arm/boot/dts/am335x-netcom-plus-8xx.dts | 10 +++++-----
7 files changed, 30 insertions(+), 31 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-baltos-ir2110.dts b/arch/arm/boot/dts/am335x-baltos-ir2110.dts
index 56915b6d818d..daf4cb398070 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir2110.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir2110.dts
@@ -58,21 +58,21 @@
dr_mode = "host";
};
-&davinci_mdio {
+&davinci_mdio_sw {
phy0: ethernet-phy@0 {
reg = <1>;
};
};
-&cpsw_emac0 {
+&cpsw_port1 {
phy-mode = "rmii";
- dual_emac_res_vlan = <1>;
+ ti,dual-emac-pvid = <1>;
phy-handle = <&phy0>;
};
-&cpsw_emac1 {
+&cpsw_port2 {
phy-mode = "rgmii-id";
- dual_emac_res_vlan = <2>;
+ ti,dual-emac-pvid = <2>;
phy-handle = <&phy1>;
};
diff --git a/arch/arm/boot/dts/am335x-baltos-ir3220.dts b/arch/arm/boot/dts/am335x-baltos-ir3220.dts
index d8d60398d803..2123bd589484 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir3220.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir3220.dts
@@ -103,18 +103,18 @@
dr_mode = "host";
};
-&cpsw_emac0 {
+&cpsw_port1 {
phy-mode = "rmii";
- dual_emac_res_vlan = <1>;
+ ti,dual-emac-pvid = <1>;
fixed-link {
speed = <100>;
full-duplex;
};
};
-&cpsw_emac1 {
+&cpsw_port2 {
phy-mode = "rgmii-id";
- dual_emac_res_vlan = <2>;
+ ti,dual-emac-pvid = <2>;
phy-handle = <&phy1>;
};
diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
index 8096d459b93f..2f3872dbf4f4 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
@@ -120,18 +120,18 @@
dr_mode = "host";
};
-&cpsw_emac0 {
+&cpsw_port1 {
phy-mode = "rmii";
- dual_emac_res_vlan = <1>;
+ ti,dual-emac-pvid = <1>;
fixed-link {
speed = <100>;
full-duplex;
};
};
-&cpsw_emac1 {
+&cpsw_port2 {
phy-mode = "rgmii-id";
- dual_emac_res_vlan = <2>;
+ ti,dual-emac-pvid = <2>;
phy-handle = <&phy1>;
};
diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi
index 1103a2cb836f..366702630290 100644
--- a/arch/arm/boot/dts/am335x-baltos.dtsi
+++ b/arch/arm/boot/dts/am335x-baltos.dtsi
@@ -339,16 +339,15 @@
};
};
-&mac {
+&mac_sw {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
- dual_emac = <1>;
status = "okay";
};
-&davinci_mdio {
+&davinci_mdio_sw {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_default>;
diff --git a/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts b/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts
index 8303b832aa50..57e756b0f192 100644
--- a/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts
+++ b/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts
@@ -61,21 +61,21 @@
dr_mode = "host";
};
-&davinci_mdio {
+&davinci_mdio_sw {
phy0: ethernet-phy@0 {
reg = <1>;
};
};
-&cpsw_emac0 {
+&cpsw_port1 {
phy-mode = "rmii";
- dual_emac_res_vlan = <1>;
+ ti,dual-emac-pvid = <1>;
phy-handle = <&phy0>;
};
-&cpsw_emac1 {
+&cpsw_port2 {
phy-mode = "rgmii-id";
- dual_emac_res_vlan = <2>;
+ ti,dual-emac-pvid = <2>;
phy-handle = <&phy1>;
};
diff --git a/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts b/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts
index f8e0e95a751f..c6cc1c6218a9 100644
--- a/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts
+++ b/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts
@@ -76,20 +76,20 @@
status = "okay";
};
-&davinci_mdio {
+&davinci_mdio_sw {
phy0: ethernet-phy@0 {
reg = <1>;
};
};
-&cpsw_emac0 {
+&cpsw_port1 {
phy-mode = "rmii";
- dual_emac_res_vlan = <1>;
+ ti,dual-emac-pvid = <1>;
phy-handle = <&phy0>;
};
-&cpsw_emac1 {
+&cpsw_port2 {
phy-mode = "rgmii-id";
- dual_emac_res_vlan = <2>;
+ ti,dual-emac-pvid = <2>;
phy-handle = <&phy1>;
};
diff --git a/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts b/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts
index a4e137527215..96dffd3ffd85 100644
--- a/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts
+++ b/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts
@@ -96,20 +96,20 @@
};
};
-&davinci_mdio {
+&davinci_mdio_sw {
phy0: ethernet-phy@0 {
reg = <1>;
};
};
-&cpsw_emac0 {
+&cpsw_port1 {
phy-mode = "rmii";
- dual_emac_res_vlan = <1>;
+ ti,dual-emac-pvid = <1>;
phy-handle = <&phy0>;
};
-&cpsw_emac1 {
+&cpsw_port2 {
phy-mode = "rgmii-id";
- dual_emac_res_vlan = <2>;
+ ti,dual-emac-pvid = <2>;
phy-handle = <&phy1>;
};
--
2.17.1
Powered by blists - more mailing lists