lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20210612011436.10437-5-grygorii.strashko@ti.com>
Date:   Sat, 12 Jun 2021 04:14:25 +0300
From:   Grygorii Strashko <grygorii.strashko@...com>
To:     Tony Lindgren <tony@...mide.com>
CC:     Lokesh Vutla <lokeshvutla@...com>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>,
        Vignesh Raghavendra <vigneshr@...com>,
        <linux-omap@...r.kernel.org>,
        Grygorii Strashko <grygorii.strashko@...com>
Subject: [PATCH next 04/15] ARM: dts: am335x-cm-t335: switch to new cpsw switch drv

The dual_mac mode has been preserved the same way between legacy and new
driver, and one port devices works the same as 1 dual_mac port - it's safe
to switch drivers.

So, switch CompuLab CM-T335 to use new cpsw switch driver. Those boards
have or 2 Ext. port wired and configured in dual_mac mode by default, or
only 1 Ext. port.

Signed-off-by: Grygorii Strashko <grygorii.strashko@...com>
---
 arch/arm/boot/dts/am335x-cm-t335.dts | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts
index 36d963db4026..dc51f6fba3b8 100644
--- a/arch/arm/boot/dts/am335x-cm-t335.dts
+++ b/arch/arm/boot/dts/am335x-cm-t335.dts
@@ -413,28 +413,31 @@ status = "okay";
 	status = "okay";
 };
 
-&mac {
+&mac_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
-	slaves = <1>;
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
 
 	ethphy0: ethernet-phy@0 {
 		reg = <0>;
 	};
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii-txid";
+	ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+	status = "disabled";
 };
 
 &mmc1 {
-- 
2.17.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ