linux-kernel - [PATCH next 06/15] ARM: dts: am335x-lxm: switch to new cpsw switch drv

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20210612011436.10437-7-grygorii.strashko@ti.com>
Date:   Sat, 12 Jun 2021 04:14:27 +0300
From:   Grygorii Strashko <grygorii.strashko@...com>
To:     Tony Lindgren <tony@...mide.com>
CC:     Lokesh Vutla <lokeshvutla@...com>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>,
        Vignesh Raghavendra <vigneshr@...com>,
        <linux-omap@...r.kernel.org>,
        Grygorii Strashko <grygorii.strashko@...com>
Subject: [PATCH next 06/15] ARM: dts: am335x-lxm: switch to new cpsw switch drv

The dual_mac mode has been preserved the same way between legacy and new
driver, and one port devices works the same as 1 dual_mac port - it's safe
to switch drivers.

So, switch NovaTech OrionLXm to use new cpsw switch driver. Those boards
have or 2 Ext. port wired and configured in dual_mac mode by default, or
only 1 Ext. port

Signed-off-by: Grygorii Strashko <grygorii.strashko@...com>
---
 arch/arm/boot/dts/am335x-lxm.dts | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts
index 0f078465297a..1282dae144dd 100644
--- a/arch/arm/boot/dts/am335x-lxm.dts
+++ b/arch/arm/boot/dts/am335x-lxm.dts
@@ -295,31 +295,29 @@
 	dr_mode = "host";
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-handle = <&ethphy0>;
 	phy-mode = "rmii";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
 	phy-handle = <&ethphy1>;
 	phy-mode = "rmii";
-	dual_emac_res_vlan = <3>;
+	ti,dual-emac-pvid = <3>;
 };
 
-&mac {
+&mac_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
-	dual_emac = <1>;
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
 
 	ethphy0: ethernet-phy@5 {
 		reg = <5>;
-- 
2.17.1