linux-kernel - [PATCH next 10/15] ARM: dts: am335x-pdu001: switch to new cpsw switch drv

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Sat, 12 Jun 2021 04:14:31 +0300
From:   Grygorii Strashko <grygorii.strashko@...com>
To:     Tony Lindgren <tony@...mide.com>
CC:     Lokesh Vutla <lokeshvutla@...com>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>,
        Vignesh Raghavendra <vigneshr@...com>,
        <linux-omap@...r.kernel.org>,
        Grygorii Strashko <grygorii.strashko@...com>
Subject: [PATCH next 10/15] ARM: dts: am335x-pdu001: switch to new cpsw switch drv

The dual_mac mode has been preserved the same way between legacy and new
driver, and one port devices works the same as 1 dual_mac port - it's safe
to switch drivers.

So, switch EETS,PDU001 to use new cpsw switch driver. Those boards have or
2 Ext. port wired and configured in dual_mac mode by default, or only 1
Ext. port.

Signed-off-by: Grygorii Strashko <grygorii.strashko@...com>
---
 arch/arm/boot/dts/am335x-pdu001.dts | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-pdu001.dts b/arch/arm/boot/dts/am335x-pdu001.dts
index d41a5ffd83cf..b793beeab245 100644
--- a/arch/arm/boot/dts/am335x-pdu001.dts
+++ b/arch/arm/boot/dts/am335x-pdu001.dts
@@ -494,17 +494,15 @@
 	};
 };
 
-&mac {
+&mac_sw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&cpsw_default>;
-	dual_emac;			/* no switch, two distinct MACs */
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&davinci_mdio_default>;
-	status = "okay";
 
 	ethphy0: ethernet-phy@0 {
 		reg = <0>;
@@ -515,16 +513,16 @@
 	};
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-handle = <&ethphy0>;
 	phy-mode = "mii";
-	dual_emac_res_vlan = <1>;
+	ti,dual-emac-pvid = <1>;
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
 	phy-handle = <&ethphy1>;
 	phy-mode = "mii";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 };
 
 &tscadc {
-- 
2.17.1