| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1623569903-47930-10-git-send-email-huangguangbin2@huawei.com>
Date: Sun, 13 Jun 2021 15:38:21 +0800
From: Guangbin Huang <huangguangbin2@...wei.com>
To: <davem@...emloft.net>, <kuba@...nel.org>, <xie.he.0141@...il.com>,
<ms@....tdt.de>, <willemb@...gle.com>
CC: <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<lipeng321@...wei.com>, <huangguangbin2@...wei.com>
Subject: [PATCH net-next 09/11] net: z85230: add some required spaces
From: Peng Li <lipeng321@...wei.com>
Add space required before the open parenthesis '(' and '{'.
Add space required after that close brace '}' and ','
Add spaces required around that '=' , '&', '*', '|', '+', '/' and '-'.
Signed-off-by: Peng Li <lipeng321@...wei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@...wei.com>
---
drivers/net/wan/z85230.c | 418 ++++++++++++++++++++++++-----------------------
1 file changed, 210 insertions(+), 208 deletions(-)
diff --git a/drivers/net/wan/z85230.c b/drivers/net/wan/z85230.c
index ea4628c..35aa032 100644
--- a/drivers/net/wan/z85230.c
+++ b/drivers/net/wan/z85230.c
@@ -71,9 +71,9 @@
static inline int z8530_read_port(unsigned long p)
{
- u8 r=inb(Z8530_PORT_OF(p));
+ u8 r = inb(Z8530_PORT_OF(p));
- if(p&Z8530_PORT_SLEEP) /* gcc should figure this out efficiently ! */
+ if (p & Z8530_PORT_SLEEP) /* gcc should figure this out efficiently ! */
udelay(5);
return r;
}
@@ -95,8 +95,8 @@ static inline int z8530_read_port(unsigned long p)
static inline void z8530_write_port(unsigned long p, u8 d)
{
- outb(d,Z8530_PORT_OF(p));
- if(p&Z8530_PORT_SLEEP)
+ outb(d, Z8530_PORT_OF(p));
+ if (p & Z8530_PORT_SLEEP)
udelay(5);
}
@@ -116,7 +116,7 @@ static void z8530_tx_done(struct z8530_channel *c);
static inline u8 read_zsreg(struct z8530_channel *c, u8 reg)
{
- if(reg)
+ if (reg)
z8530_write_port(c->ctrlio, reg);
return z8530_read_port(c->ctrlio);
}
@@ -133,7 +133,7 @@ static inline u8 read_zsdata(struct z8530_channel *c)
{
u8 r;
- r=z8530_read_port(c->dataio);
+ r = z8530_read_port(c->dataio);
return r;
}
@@ -151,7 +151,7 @@ static inline u8 read_zsdata(struct z8530_channel *c)
*/
static inline void write_zsreg(struct z8530_channel *c, u8 reg, u8 val)
{
- if(reg)
+ if (reg)
z8530_write_port(c->ctrlio, reg);
z8530_write_port(c->ctrlio, val);
}
@@ -184,7 +184,7 @@ static inline void write_zsdata(struct z8530_channel *c, u8 val)
/* Register loading parameters for a dead port
*/
-u8 z8530_dead_port[]=
+u8 z8530_dead_port[] =
{
255
};
@@ -197,22 +197,22 @@ EXPORT_SYMBOL(z8530_dead_port);
* "kilostream" service, and most other similar services.
*/
-u8 z8530_hdlc_kilostream[]=
+u8 z8530_hdlc_kilostream[] =
{
- 4, SYNC_ENAB|SDLC|X1CLK,
+ 4, SYNC_ENAB | SDLC | X1CLK,
2, 0, /* No vector */
1, 0,
- 3, ENT_HM|RxCRC_ENAB|Rx8,
- 5, TxCRC_ENAB|RTS|TxENAB|Tx8|DTR,
+ 3, ENT_HM | RxCRC_ENAB | Rx8,
+ 5, TxCRC_ENAB | RTS | TxENAB | Tx8 | DTR,
9, 0, /* Disable interrupts */
6, 0xFF,
7, FLAG,
- 10, ABUNDER|NRZ|CRCPS,/*MARKIDLE ??*/
+ 10, ABUNDER | NRZ | CRCPS, /*MARKIDLE ??*/
11, TCTRxCP,
14, DISDPLL,
- 15, DCDIE|SYNCIE|CTSIE|TxUIE|BRKIE,
- 1, EXT_INT_ENAB|TxINT_ENAB|INT_ALL_Rx,
- 9, NV|MIE|NORESET,
+ 15, DCDIE | SYNCIE | CTSIE | TxUIE | BRKIE,
+ 1, EXT_INT_ENAB | TxINT_ENAB | INT_ALL_Rx,
+ 9, NV | MIE | NORESET,
255
};
EXPORT_SYMBOL(z8530_hdlc_kilostream);
@@ -220,22 +220,22 @@ EXPORT_SYMBOL(z8530_hdlc_kilostream);
/* As above but for enhanced chips.
*/
-u8 z8530_hdlc_kilostream_85230[]=
+u8 z8530_hdlc_kilostream_85230[] =
{
- 4, SYNC_ENAB|SDLC|X1CLK,
+ 4, SYNC_ENAB | SDLC | X1CLK,
2, 0, /* No vector */
1, 0,
- 3, ENT_HM|RxCRC_ENAB|Rx8,
- 5, TxCRC_ENAB|RTS|TxENAB|Tx8|DTR,
+ 3, ENT_HM | RxCRC_ENAB | Rx8,
+ 5, TxCRC_ENAB | RTS | TxENAB | Tx8 | DTR,
9, 0, /* Disable interrupts */
6, 0xFF,
7, FLAG,
- 10, ABUNDER|NRZ|CRCPS, /* MARKIDLE?? */
+ 10, ABUNDER | NRZ | CRCPS, /* MARKIDLE?? */
11, TCTRxCP,
14, DISDPLL,
- 15, DCDIE|SYNCIE|CTSIE|TxUIE|BRKIE,
- 1, EXT_INT_ENAB|TxINT_ENAB|INT_ALL_Rx,
- 9, NV|MIE|NORESET,
+ 15, DCDIE | SYNCIE | CTSIE | TxUIE | BRKIE,
+ 1, EXT_INT_ENAB | TxINT_ENAB | INT_ALL_Rx,
+ 9, NV | MIE | NORESET,
23, 3, /* Extended mode AUTO TX and EOM*/
255
@@ -260,7 +260,7 @@ static void z8530_flush_fifo(struct z8530_channel *c)
read_zsreg(c, R1);
read_zsreg(c, R1);
read_zsreg(c, R1);
- if(c->dev->type==Z85230)
+ if (c->dev->type == Z85230)
{
read_zsreg(c, R1);
read_zsreg(c, R1);
@@ -315,40 +315,40 @@ static void z8530_rtsdtr(struct z8530_channel *c, int set)
static void z8530_rx(struct z8530_channel *c)
{
- u8 ch,stat;
+ u8 ch, stat;
- while(1)
+ while (1)
{
/* FIFO empty ? */
- if(!(read_zsreg(c, R0)&1))
+ if (!(read_zsreg(c, R0) & 1))
break;
- ch=read_zsdata(c);
- stat=read_zsreg(c, R1);
+ ch = read_zsdata(c);
+ stat = read_zsreg(c, R1);
/* Overrun ?
*/
- if(c->count < c->max)
+ if (c->count < c->max)
{
- *c->dptr++=ch;
+ *c->dptr++ = ch;
c->count++;
}
- if(stat&END_FR)
+ if (stat & END_FR)
{
/* Error ?
*/
- if(stat&(Rx_OVR|CRC_ERR))
+ if (stat & (Rx_OVR | CRC_ERR))
{
/* Rewind the buffer and return */
- if(c->skb)
- c->dptr=c->skb->data;
- c->count=0;
- if(stat&Rx_OVR)
+ if (c->skb)
+ c->dptr = c->skb->data;
+ c->count = 0;
+ if (stat & Rx_OVR)
{
pr_warn("%s: overrun\n", c->dev->name);
c->rx_overrun++;
}
- if(stat&CRC_ERR)
+ if (stat & CRC_ERR)
{
c->rx_crc_err++;
/* printk("crc error\n"); */
@@ -356,8 +356,8 @@ static void z8530_rx(struct z8530_channel *c)
/* Shove the frame upstream */
} else {
/* Drop the lock for RX processing, or
- * there are deadlocks
- */
+ * there are deadlocks
+ */
z8530_rx_done(c);
write_zsctrl(c, RES_Rx_CRC);
}
@@ -381,9 +381,9 @@ static void z8530_rx(struct z8530_channel *c)
static void z8530_tx(struct z8530_channel *c)
{
- while(c->txcount) {
+ while (c->txcount) {
/* FIFO full ? */
- if(!(read_zsreg(c, R0)&4))
+ if (!(read_zsreg(c, R0) & 4))
return;
c->txcount--;
/* Shovel out the byte
@@ -391,10 +391,10 @@ static void z8530_tx(struct z8530_channel *c)
write_zsreg(c, R8, *c->tx_ptr++);
write_zsctrl(c, RES_H_IUS);
/* We are about to underflow */
- if(c->txcount==0)
+ if (c->txcount == 0)
{
write_zsctrl(c, RES_EOM_L);
- write_zsreg(c, R10, c->regs[10]&~ABUNDER);
+ write_zsreg(c, R10, c->regs[10] & ~ABUNDER);
}
}
@@ -471,7 +471,7 @@ EXPORT_SYMBOL(z8530_sync);
static void z8530_dma_rx(struct z8530_channel *chan)
{
- if(chan->rxdma_on)
+ if (chan->rxdma_on)
{
/* Special condition check only */
u8 status;
@@ -479,12 +479,11 @@ static void z8530_dma_rx(struct z8530_channel *chan)
read_zsreg(chan, R7);
read_zsreg(chan, R6);
- status=read_zsreg(chan, R1);
+ status = read_zsreg(chan, R1);
- if(status&END_FR)
- {
+ if (status & END_FR)
z8530_rx_done(chan); /* Fire up the next one */
- }
+
write_zsctrl(chan, ERR_RES);
write_zsctrl(chan, RES_H_IUS);
} else {
@@ -502,7 +501,7 @@ static void z8530_dma_rx(struct z8530_channel *chan)
*/
static void z8530_dma_tx(struct z8530_channel *chan)
{
- if(!chan->dma_tx)
+ if (!chan->dma_tx)
{
pr_warn("Hey who turned the DMA off?\n");
z8530_tx(chan);
@@ -526,21 +525,21 @@ static void z8530_dma_status(struct z8530_channel *chan)
{
u8 status, altered;
- status=read_zsreg(chan, R0);
- altered=chan->status^status;
+ status = read_zsreg(chan, R0);
+ altered = chan->status ^ status;
- chan->status=status;
+ chan->status = status;
- if(chan->dma_tx)
+ if (chan->dma_tx)
{
- if(status&TxEOM)
+ if (status & TxEOM)
{
unsigned long flags;
- flags=claim_dma_lock();
+ flags = claim_dma_lock();
disable_dma(chan->txdma);
clear_dma_ff(chan->txdma);
- chan->txdma_on=0;
+ chan->txdma_on = 0;
release_dma_lock(flags);
z8530_tx_done(chan);
}
@@ -594,9 +593,9 @@ static void z8530_rx_clear(struct z8530_channel *c)
u8 stat;
read_zsdata(c);
- stat=read_zsreg(c, R1);
+ stat = read_zsreg(c, R1);
- if(stat&END_FR)
+ if (stat & END_FR)
write_zsctrl(c, RES_Rx_CRC);
/* Clear irq
*/
@@ -630,9 +629,9 @@ static void z8530_tx_clear(struct z8530_channel *c)
static void z8530_status_clear(struct z8530_channel *chan)
{
- u8 status=read_zsreg(chan, R0);
+ u8 status = read_zsreg(chan, R0);
- if(status&TxEOM)
+ if (status & TxEOM)
write_zsctrl(chan, ERR_RES);
write_zsctrl(chan, RES_EXT_INT);
write_zsctrl(chan, RES_H_IUS);
@@ -647,7 +646,7 @@ EXPORT_SYMBOL(z8530_nop);
/**
* z8530_interrupt - Handle an interrupt from a Z8530
- * @irq: Interrupt number
+ * @irq: Interrupt number
* @dev_id: The Z8530 device that is interrupting.
*
* A Z85[2]30 device has stuck its hand in the air for attention.
@@ -663,25 +662,26 @@ EXPORT_SYMBOL(z8530_nop);
irqreturn_t z8530_interrupt(int irq, void *dev_id)
{
- struct z8530_dev *dev=dev_id;
+ struct z8530_dev *dev = dev_id;
u8 intr;
static int locker;
- int work=0;
+ int work = 0;
struct z8530_irqhandler *irqs;
- if(locker)
+ if (locker)
{
pr_err("IRQ re-enter\n");
return IRQ_NONE;
}
- locker=1;
+ locker = 1;
spin_lock(&dev->lock);
- while(++work<5000)
+ while (++work < 5000)
{
intr = read_zsreg(&dev->chanA, R3);
- if(!(intr & (CHARxIP|CHATxIP|CHAEXT|CHBRxIP|CHBTxIP|CHBEXT)))
+ if (!(intr &
+ (CHARxIP | CHATxIP | CHAEXT | CHBRxIP | CHBTxIP | CHBEXT)))
break;
/* This holds the IRQ status. On the 8530 you must read it
@@ -692,46 +692,46 @@ irqreturn_t z8530_interrupt(int irq, void *dev_id)
* an IRQ for someone else remember
*/
- irqs=dev->chanA.irqs;
+ irqs = dev->chanA.irqs;
- if(intr & (CHARxIP|CHATxIP|CHAEXT))
+ if (intr & (CHARxIP | CHATxIP | CHAEXT))
{
- if(intr&CHARxIP)
+ if (intr & CHARxIP)
irqs->rx(&dev->chanA);
- if(intr&CHATxIP)
+ if (intr & CHATxIP)
irqs->tx(&dev->chanA);
- if(intr&CHAEXT)
+ if (intr & CHAEXT)
irqs->status(&dev->chanA);
}
- irqs=dev->chanB.irqs;
+ irqs = dev->chanB.irqs;
- if(intr & (CHBRxIP|CHBTxIP|CHBEXT))
+ if (intr & (CHBRxIP | CHBTxIP | CHBEXT))
{
- if(intr&CHBRxIP)
+ if (intr & CHBRxIP)
irqs->rx(&dev->chanB);
- if(intr&CHBTxIP)
+ if (intr & CHBTxIP)
irqs->tx(&dev->chanB);
- if(intr&CHBEXT)
+ if (intr & CHBEXT)
irqs->status(&dev->chanB);
}
}
spin_unlock(&dev->lock);
- if(work==5000)
+ if (work == 5000)
pr_err("%s: interrupt jammed - abort(0x%X)!\n",
dev->name, intr);
/* Ok all done */
- locker=0;
+ locker = 0;
return IRQ_HANDLED;
}
EXPORT_SYMBOL(z8530_interrupt);
-static const u8 reg_init[16]=
+static const u8 reg_init[16] =
{
- 0,0,0,0,
- 0,0,0,0,
- 0,0,0,0,
- 0x55,0,0,0
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0x55, 0, 0, 0
};
/**
@@ -749,7 +749,7 @@ int z8530_sync_open(struct net_device *dev, struct z8530_channel *c)
spin_lock_irqsave(c->lock, flags);
c->sync = 1;
- c->mtu = dev->mtu+64;
+ c->mtu = dev->mtu + 64;
c->count = 0;
c->skb = NULL;
c->skb2 = NULL;
@@ -758,11 +758,11 @@ int z8530_sync_open(struct net_device *dev, struct z8530_channel *c)
/* This loads the double buffer up */
z8530_rx_done(c); /* Load the frame ring */
z8530_rx_done(c); /* Load the backup frame */
- z8530_rtsdtr(c,1);
+ z8530_rtsdtr(c, 1);
c->dma_tx = 0;
- c->regs[R1]|=TxINT_ENAB;
+ c->regs[R1] |= TxINT_ENAB;
write_zsreg(c, R1, c->regs[R1]);
- write_zsreg(c, R3, c->regs[R3]|RxENABLE);
+ write_zsreg(c, R3, c->regs[R3] | RxENABLE);
spin_unlock_irqrestore(c->lock, flags);
return 0;
@@ -787,9 +787,9 @@ int z8530_sync_close(struct net_device *dev, struct z8530_channel *c)
c->max = 0;
c->sync = 0;
- chk=read_zsreg(c,R0);
+ chk = read_zsreg(c, R0);
write_zsreg(c, R3, c->regs[R3]);
- z8530_rtsdtr(c,0);
+ z8530_rtsdtr(c, 0);
spin_unlock_irqrestore(c->lock, flags);
return 0;
@@ -810,7 +810,7 @@ int z8530_sync_dma_open(struct net_device *dev, struct z8530_channel *c)
unsigned long cflags, dflags;
c->sync = 1;
- c->mtu = dev->mtu+64;
+ c->mtu = dev->mtu + 64;
c->count = 0;
c->skb = NULL;
c->skb2 = NULL;
@@ -825,27 +825,27 @@ int z8530_sync_dma_open(struct net_device *dev, struct z8530_channel *c)
* should be fine.
*/
- if(c->mtu > PAGE_SIZE/2)
+ if (c->mtu > PAGE_SIZE / 2)
return -EMSGSIZE;
- c->rx_buf[0]=(void *)get_zeroed_page(GFP_KERNEL|GFP_DMA);
+ c->rx_buf[0] = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA);
if (!c->rx_buf[0])
return -ENOBUFS;
- c->rx_buf[1]=c->rx_buf[0]+PAGE_SIZE/2;
+ c->rx_buf[1] = c->rx_buf[0] + PAGE_SIZE / 2;
- c->tx_dma_buf[0]=(void *)get_zeroed_page(GFP_KERNEL|GFP_DMA);
+ c->tx_dma_buf[0] = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA);
if (!c->tx_dma_buf[0])
{
free_page((unsigned long)c->rx_buf[0]);
- c->rx_buf[0]=NULL;
+ c->rx_buf[0] = NULL;
return -ENOBUFS;
}
- c->tx_dma_buf[1]=c->tx_dma_buf[0]+PAGE_SIZE/2;
+ c->tx_dma_buf[1] = c->tx_dma_buf[0] + PAGE_SIZE / 2;
- c->tx_dma_used=0;
+ c->tx_dma_used = 0;
c->dma_tx = 1;
- c->dma_num=0;
- c->dma_ready=1;
+ c->dma_num = 0;
+ c->dma_ready = 1;
/* Enable DMA control mode
*/
@@ -855,21 +855,21 @@ int z8530_sync_dma_open(struct net_device *dev, struct z8530_channel *c)
/* TX DMA via DIR/REQ
*/
- c->regs[R14]|= DTRREQ;
+ c->regs[R14] |= DTRREQ;
write_zsreg(c, R14, c->regs[R14]);
- c->regs[R1]&= ~TxINT_ENAB;
+ c->regs[R1] &= ~TxINT_ENAB;
write_zsreg(c, R1, c->regs[R1]);
/* RX DMA via W/Req
*/
- c->regs[R1]|= WT_FN_RDYFN;
- c->regs[R1]|= WT_RDY_RT;
- c->regs[R1]|= INT_ERR_Rx;
- c->regs[R1]&= ~TxINT_ENAB;
+ c->regs[R1] |= WT_FN_RDYFN;
+ c->regs[R1] |= WT_RDY_RT;
+ c->regs[R1] |= INT_ERR_Rx;
+ c->regs[R1] &= ~TxINT_ENAB;
write_zsreg(c, R1, c->regs[R1]);
- c->regs[R1]|= WT_RDY_ENAB;
+ c->regs[R1] |= WT_RDY_ENAB;
write_zsreg(c, R1, c->regs[R1]);
/* DMA interrupts
@@ -878,11 +878,11 @@ int z8530_sync_dma_open(struct net_device *dev, struct z8530_channel *c)
/* Set up the DMA configuration
*/
- dflags=claim_dma_lock();
+ dflags = claim_dma_lock();
disable_dma(c->rxdma);
clear_dma_ff(c->rxdma);
- set_dma_mode(c->rxdma, DMA_MODE_READ|0x10);
+ set_dma_mode(c->rxdma, DMA_MODE_READ | 0x10);
set_dma_addr(c->rxdma, virt_to_bus(c->rx_buf[0]));
set_dma_count(c->rxdma, c->mtu);
enable_dma(c->rxdma);
@@ -902,8 +902,8 @@ int z8530_sync_dma_open(struct net_device *dev, struct z8530_channel *c)
c->tx_dma_used = 1;
c->irqs = &z8530_dma_sync;
- z8530_rtsdtr(c,1);
- write_zsreg(c, R3, c->regs[R3]|RxENABLE);
+ z8530_rtsdtr(c, 1);
+ write_zsreg(c, R3, c->regs[R3] | RxENABLE);
spin_unlock_irqrestore(c->lock, cflags);
@@ -949,27 +949,27 @@ int z8530_sync_dma_close(struct net_device *dev, struct z8530_channel *c)
/* Disable DMA control mode
*/
- c->regs[R1]&= ~WT_RDY_ENAB;
+ c->regs[R1] &= ~WT_RDY_ENAB;
write_zsreg(c, R1, c->regs[R1]);
- c->regs[R1]&= ~(WT_RDY_RT|WT_FN_RDYFN|INT_ERR_Rx);
- c->regs[R1]|= INT_ALL_Rx;
+ c->regs[R1] &= ~(WT_RDY_RT | WT_FN_RDYFN | INT_ERR_Rx);
+ c->regs[R1] |= INT_ALL_Rx;
write_zsreg(c, R1, c->regs[R1]);
- c->regs[R14]&= ~DTRREQ;
+ c->regs[R14] &= ~DTRREQ;
write_zsreg(c, R14, c->regs[R14]);
- if(c->rx_buf[0])
+ if (c->rx_buf[0])
{
free_page((unsigned long)c->rx_buf[0]);
- c->rx_buf[0]=NULL;
+ c->rx_buf[0] = NULL;
}
- if(c->tx_dma_buf[0])
+ if (c->tx_dma_buf[0])
{
free_page((unsigned long)c->tx_dma_buf[0]);
- c->tx_dma_buf[0]=NULL;
+ c->tx_dma_buf[0] = NULL;
}
- chk=read_zsreg(c,R0);
+ chk = read_zsreg(c, R0);
write_zsreg(c, R3, c->regs[R3]);
- z8530_rtsdtr(c,0);
+ z8530_rtsdtr(c, 0);
spin_unlock_irqrestore(c->lock, flags);
@@ -993,7 +993,7 @@ int z8530_sync_txdma_open(struct net_device *dev, struct z8530_channel *c)
printk("Opening sync interface for TX-DMA\n");
c->sync = 1;
- c->mtu = dev->mtu+64;
+ c->mtu = dev->mtu + 64;
c->count = 0;
c->skb = NULL;
c->skb2 = NULL;
@@ -1003,14 +1003,14 @@ int z8530_sync_txdma_open(struct net_device *dev, struct z8530_channel *c)
* should be fine.
*/
- if(c->mtu > PAGE_SIZE/2)
+ if (c->mtu > PAGE_SIZE / 2)
return -EMSGSIZE;
- c->tx_dma_buf[0]=(void *)get_zeroed_page(GFP_KERNEL|GFP_DMA);
+ c->tx_dma_buf[0] = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA);
if (!c->tx_dma_buf[0])
return -ENOBUFS;
- c->tx_dma_buf[1] = c->tx_dma_buf[0] + PAGE_SIZE/2;
+ c->tx_dma_buf[1] = c->tx_dma_buf[0] + PAGE_SIZE / 2;
spin_lock_irqsave(c->lock, cflags);
@@ -1026,9 +1026,9 @@ int z8530_sync_txdma_open(struct net_device *dev, struct z8530_channel *c)
c->rxdma_on = 0;
c->txdma_on = 0;
- c->tx_dma_used=0;
- c->dma_num=0;
- c->dma_ready=1;
+ c->tx_dma_used = 0;
+ c->dma_num = 0;
+ c->dma_ready = 1;
c->dma_tx = 1;
/* Enable DMA control mode
@@ -1036,10 +1036,10 @@ int z8530_sync_txdma_open(struct net_device *dev, struct z8530_channel *c)
/* TX DMA via DIR/REQ
*/
- c->regs[R14]|= DTRREQ;
+ c->regs[R14] |= DTRREQ;
write_zsreg(c, R14, c->regs[R14]);
- c->regs[R1]&= ~TxINT_ENAB;
+ c->regs[R1] &= ~TxINT_ENAB;
write_zsreg(c, R1, c->regs[R1]);
/* Set up the DMA configuration
@@ -1062,8 +1062,8 @@ int z8530_sync_txdma_open(struct net_device *dev, struct z8530_channel *c)
c->tx_dma_used = 1;
c->irqs = &z8530_txdma_sync;
- z8530_rtsdtr(c,1);
- write_zsreg(c, R3, c->regs[R3]|RxENABLE);
+ z8530_rtsdtr(c, 1);
+ write_zsreg(c, R3, c->regs[R3] | RxENABLE);
spin_unlock_irqrestore(c->lock, cflags);
return 0;
@@ -1105,22 +1105,22 @@ int z8530_sync_txdma_close(struct net_device *dev, struct z8530_channel *c)
/* Disable DMA control mode
*/
- c->regs[R1]&= ~WT_RDY_ENAB;
+ c->regs[R1] &= ~WT_RDY_ENAB;
write_zsreg(c, R1, c->regs[R1]);
- c->regs[R1]&= ~(WT_RDY_RT|WT_FN_RDYFN|INT_ERR_Rx);
- c->regs[R1]|= INT_ALL_Rx;
+ c->regs[R1] &= ~(WT_RDY_RT | WT_FN_RDYFN | INT_ERR_Rx);
+ c->regs[R1] |= INT_ALL_Rx;
write_zsreg(c, R1, c->regs[R1]);
- c->regs[R14]&= ~DTRREQ;
+ c->regs[R14] &= ~DTRREQ;
write_zsreg(c, R14, c->regs[R14]);
- if(c->tx_dma_buf[0])
+ if (c->tx_dma_buf[0])
{
free_page((unsigned long)c->tx_dma_buf[0]);
- c->tx_dma_buf[0]=NULL;
+ c->tx_dma_buf[0] = NULL;
}
- chk=read_zsreg(c,R0);
+ chk = read_zsreg(c, R0);
write_zsreg(c, R3, c->regs[R3]);
- z8530_rtsdtr(c,0);
+ z8530_rtsdtr(c, 0);
spin_unlock_irqrestore(c->lock, cflags);
return 0;
@@ -1130,7 +1130,7 @@ EXPORT_SYMBOL(z8530_sync_txdma_close);
/* Name strings for Z8530 chips. SGI claim to have a 130, Zilog deny
* it exists...
*/
-static const char *z8530_type_name[]={
+static const char * const z8530_type_name[] = {
"Z8530",
"Z85C30",
"Z85230"
@@ -1165,23 +1165,23 @@ static inline int do_z8530_init(struct z8530_dev *dev)
/* NOP the interrupt handlers first - we might get a
* floating IRQ transition when we reset the chip
*/
- dev->chanA.irqs=&z8530_nop;
- dev->chanB.irqs=&z8530_nop;
- dev->chanA.dcdcheck=DCD;
- dev->chanB.dcdcheck=DCD;
+ dev->chanA.irqs = &z8530_nop;
+ dev->chanB.irqs = &z8530_nop;
+ dev->chanA.dcdcheck = DCD;
+ dev->chanB.dcdcheck = DCD;
/* Reset the chip */
write_zsreg(&dev->chanA, R9, 0xC0);
udelay(200);
/* Now check its valid */
write_zsreg(&dev->chanA, R12, 0xAA);
- if(read_zsreg(&dev->chanA, R12)!=0xAA)
+ if (read_zsreg(&dev->chanA, R12) != 0xAA)
return -ENODEV;
write_zsreg(&dev->chanA, R12, 0x55);
- if(read_zsreg(&dev->chanA, R12)!=0x55)
+ if (read_zsreg(&dev->chanA, R12) != 0x55)
return -ENODEV;
- dev->type=Z8530;
+ dev->type = Z8530;
/* See the application note.
*/
@@ -1192,12 +1192,12 @@ static inline int do_z8530_init(struct z8530_dev *dev)
* the chip is enhanced.
*/
- if(read_zsreg(&dev->chanA, R15)==0x01)
+ if (read_zsreg(&dev->chanA, R15) == 0x01)
{
/* This C30 versus 230 detect is from Klaus Kudielka's dmascc */
/* Put a char in the fifo */
write_zsreg(&dev->chanA, R8, 0);
- if(read_zsreg(&dev->chanA, R0)&Tx_BUF_EMP)
+ if (read_zsreg(&dev->chanA, R0) & Tx_BUF_EMP)
dev->type = Z85230; /* Has a FIFO */
else
dev->type = Z85C30; /* Z85C30, 1 byte FIFO */
@@ -1214,7 +1214,7 @@ static inline int do_z8530_init(struct z8530_dev *dev)
*/
memcpy(dev->chanA.regs, reg_init, 16);
- memcpy(dev->chanB.regs, reg_init ,16);
+ memcpy(dev->chanB.regs, reg_init, 16);
return 0;
}
@@ -1270,8 +1270,8 @@ int z8530_shutdown(struct z8530_dev *dev)
/* Reset the chip */
spin_lock_irqsave(&dev->lock, flags);
- dev->chanA.irqs=&z8530_nop;
- dev->chanB.irqs=&z8530_nop;
+ dev->chanA.irqs = &z8530_nop;
+ dev->chanB.irqs = &z8530_nop;
write_zsreg(&dev->chanA, R9, 0xC0);
/* We must lock the udelay, the chip is offlimits here */
udelay(100);
@@ -1297,27 +1297,27 @@ int z8530_channel_load(struct z8530_channel *c, u8 *rtable)
spin_lock_irqsave(c->lock, flags);
- while(*rtable!=255)
+ while (*rtable != 255)
{
- int reg=*rtable++;
-
- if(reg>0x0F)
- write_zsreg(c, R15, c->regs[15]|1);
- write_zsreg(c, reg&0x0F, *rtable);
- if(reg>0x0F)
- write_zsreg(c, R15, c->regs[15]&~1);
- c->regs[reg]=*rtable++;
+ int reg = *rtable++;
+
+ if (reg > 0x0F)
+ write_zsreg(c, R15, c->regs[15] | 1);
+ write_zsreg(c, reg & 0x0F, *rtable);
+ if (reg > 0x0F)
+ write_zsreg(c, R15, c->regs[15] & ~1);
+ c->regs[reg] = *rtable++;
}
- c->rx_function=z8530_null_rx;
- c->skb=NULL;
- c->tx_skb=NULL;
- c->tx_next_skb=NULL;
- c->mtu=1500;
- c->max=0;
- c->count=0;
- c->status=read_zsreg(c, R0);
- c->sync=1;
- write_zsreg(c, R3, c->regs[R3]|RxENABLE);
+ c->rx_function = z8530_null_rx;
+ c->skb = NULL;
+ c->tx_skb = NULL;
+ c->tx_next_skb = NULL;
+ c->mtu = 1500;
+ c->max = 0;
+ c->count = 0;
+ c->status = read_zsreg(c, R0);
+ c->sync = 1;
+ write_zsreg(c, R3, c->regs[R3] | RxENABLE);
spin_unlock_irqrestore(c->lock, flags);
return 0;
@@ -1342,19 +1342,19 @@ static void z8530_tx_begin(struct z8530_channel *c)
{
unsigned long flags;
- if(c->tx_skb)
+ if (c->tx_skb)
return;
- c->tx_skb=c->tx_next_skb;
- c->tx_next_skb=NULL;
- c->tx_ptr=c->tx_next_ptr;
+ c->tx_skb = c->tx_next_skb;
+ c->tx_next_skb = NULL;
+ c->tx_ptr = c->tx_next_ptr;
if (!c->tx_skb)
{
/* Idle on */
- if(c->dma_tx)
+ if (c->dma_tx)
{
- flags=claim_dma_lock();
+ flags = claim_dma_lock();
disable_dma(c->txdma);
/* Check if we crapped out.
*/
@@ -1365,11 +1365,11 @@ static void z8530_tx_begin(struct z8530_channel *c)
}
release_dma_lock(flags);
}
- c->txcount=0;
+ c->txcount = 0;
} else {
- c->txcount=c->tx_skb->len;
+ c->txcount = c->tx_skb->len;
- if(c->dma_tx)
+ if (c->dma_tx)
{
/* FIXME. DMA is broken for the original 8530,
* on the older parts we need to set a flag and
@@ -1377,25 +1377,25 @@ static void z8530_tx_begin(struct z8530_channel *c)
* stage off
*/
- flags=claim_dma_lock();
+ flags = claim_dma_lock();
disable_dma(c->txdma);
/* These two are needed by the 8530/85C30
* and must be issued when idling.
*/
- if(c->dev->type!=Z85230)
+ if (c->dev->type != Z85230)
{
write_zsctrl(c, RES_Tx_CRC);
write_zsctrl(c, RES_EOM_L);
}
- write_zsreg(c, R10, c->regs[10]&~ABUNDER);
+ write_zsreg(c, R10, c->regs[10] & ~ABUNDER);
clear_dma_ff(c->txdma);
set_dma_addr(c->txdma, virt_to_bus(c->tx_ptr));
set_dma_count(c->txdma, c->txcount);
enable_dma(c->txdma);
release_dma_lock(flags);
write_zsctrl(c, RES_EOM_L);
- write_zsreg(c, R5, c->regs[R5]|TxENAB);
+ write_zsreg(c, R5, c->regs[R5] | TxENAB);
} else {
/* ABUNDER off */
write_zsreg(c, R10, c->regs[10]);
@@ -1472,35 +1472,35 @@ static void z8530_rx_done(struct z8530_channel *c)
/* Is our receive engine in DMA mode
*/
- if(c->rxdma_on)
+ if (c->rxdma_on)
{
/* Save the ready state and the buffer currently
* being used as the DMA target
*/
- int ready=c->dma_ready;
- unsigned char *rxb=c->rx_buf[c->dma_num];
+ int ready = c->dma_ready;
+ unsigned char *rxb = c->rx_buf[c->dma_num];
unsigned long flags;
/* Complete this DMA. Necessary to find the length
*/
- flags=claim_dma_lock();
+ flags = claim_dma_lock();
disable_dma(c->rxdma);
clear_dma_ff(c->rxdma);
- c->rxdma_on=0;
- ct=c->mtu-get_dma_residue(c->rxdma);
- if(ct<0)
- ct=2; /* Shit happens.. */
- c->dma_ready=0;
+ c->rxdma_on = 0;
+ ct = c->mtu - get_dma_residue(c->rxdma);
+ if (ct < 0)
+ ct = 2; /* Shit happens.. */
+ c->dma_ready = 0;
/* Normal case: the other slot is free, start the next DMA
* into it immediately.
*/
- if(ready)
+ if (ready)
{
- c->dma_num^=1;
- set_dma_mode(c->rxdma, DMA_MODE_READ|0x10);
+ c->dma_num ^= 1;
+ set_dma_mode(c->rxdma, DMA_MODE_READ | 0x10);
set_dma_addr(c->rxdma, virt_to_bus(c->rx_buf[c->dma_num]));
set_dma_count(c->rxdma, c->mtu);
c->rxdma_on = 1;
@@ -1551,7 +1551,7 @@ static void z8530_rx_done(struct z8530_channel *c)
* sync IRQ for the RT_LOCK area.
*
*/
- ct=c->count;
+ ct = c->count;
c->skb = c->skb2;
c->count = 0;
@@ -1594,10 +1594,10 @@ static void z8530_rx_done(struct z8530_channel *c)
static inline int spans_boundary(struct sk_buff *skb)
{
- unsigned long a=(unsigned long)skb->data;
+ unsigned long a = (unsigned long)skb->data;
- a^=(a+skb->len);
- if(a&0x00010000) /* If the 64K bit is different.. */
+ a ^= (a + skb->len);
+ if (a & 0x00010000) /* If the 64K bit is different.. */
return 1;
return 0;
}
@@ -1620,7 +1620,7 @@ netdev_tx_t z8530_queue_xmit(struct z8530_channel *c, struct sk_buff *skb)
unsigned long flags;
netif_stop_queue(c->netdevice);
- if(c->tx_next_skb)
+ if (c->tx_next_skb)
return NETDEV_TX_BUSY;
/* PC SPECIFIC - DMA limits */
@@ -1628,7 +1628,9 @@ netdev_tx_t z8530_queue_xmit(struct z8530_channel *c, struct sk_buff *skb)
* limit, then copy to the flip buffer
*/
- if(c->dma_tx && ((unsigned long)(virt_to_bus(skb->data+skb->len))>=16*1024*1024 || spans_boundary(skb)))
+ if (c->dma_tx &&
+ ((unsigned long)(virt_to_bus(skb->data + skb->len)) >=
+ 16 * 1024 * 1024 || spans_boundary(skb)))
{
/* Send the flip buffer, and flip the flippy bit.
* We don't care which is used when just so long as
@@ -1636,14 +1638,14 @@ netdev_tx_t z8530_queue_xmit(struct z8530_channel *c, struct sk_buff *skb)
* only one buffer can be going out at a time the other
* has to be safe.
*/
- c->tx_next_ptr=c->tx_dma_buf[c->tx_dma_used];
- c->tx_dma_used^=1; /* Flip temp buffer */
+ c->tx_next_ptr = c->tx_dma_buf[c->tx_dma_used];
+ c->tx_dma_used ^= 1; /* Flip temp buffer */
skb_copy_from_linear_data(skb, c->tx_next_ptr, skb->len);
} else {
c->tx_next_ptr = skb->data;
}
RT_LOCK;
- c->tx_next_skb=skb;
+ c->tx_next_skb = skb;
RT_UNLOCK;
spin_lock_irqsave(c->lock, flags);
--
2.8.1
Powered by blists - more mailing lists