[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <25edf9d4-6740-4ce3-90e4-8633b936fc5b@gmail.com>
Date: Mon, 14 Jun 2021 18:46:49 +0200
From: Alex Bee <knaerzche@...il.com>
To: Ezequiel Garcia <ezequiel@...labora.com>
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
Lee Jones <lee.jones@...aro.org>,
Heiko Stuebner <heiko@...ech.de>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
linux-media@...r.kernel.org, devicetree@...r.kernel.org,
linux-rockchip@...ts.infradead.org
Subject: Re: [PATCH v2 06/12] media: hantro: add support for Rockchip RK3066
Hi Ezequiel,
Am 11.06.21 um 17:50 schrieb Ezequiel Garcia:
> Hi Alex,
>
> On Thu, 2021-05-27 at 17:44 +0200, Alex Bee wrote:
>> RK3066's VPU IP block is the predecessor from what RK3288 has.
>> The hardware differences are:
>> - supports decoding frame sizes up to 1920x1088 only
>> - doesn't have the 'G1_REG_SOFT_RESET' register
>> (requires another .reset callback for hantro_codec_ops,
>> since writing this register will result in non-working
>> IP block)
>> - has one ACLK/HCLK per vdpu/vepu
>> - ACLKs can be clocked up to 300 MHz only
> Have you tested trying 400 MHz (or more) ?
Yes, I've tried this on both RK3066 and RK3036 variants - everything
above 300 MHz results in non-functioning IP block.
See comment in RK3036 devicetree in vendor kernel at [1].
[1]
https://github.com/rockchip-linux/kernel/blob/develop-4.4/arch/arm/boot/dts/rk3036.dtsi#L246-L248
>
>> - no MMU
>> (no changes required: CMA will be transparently used)
>>
>> Add a new RK3066 variant which reflect this differences. This variant
>> can be used for RK3188 as well.
>>
> Reviewed-by: Ezequiel Garcia <ezequiel@...labora.com>
>
> Thanks!
> Ezequiel
>
Powered by blists - more mailing lists