| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 15 Jun 2021 13:15:43 +0530
From: Bhupesh Sharma <bhupesh.sharma@...aro.org>
To: linux-arm-msm@...r.kernel.org
Cc: bhupesh.sharma@...aro.org, bhupesh.linux@...il.com,
linux-gpio@...r.kernel.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org,
Linus Walleij <linus.walleij@...aro.org>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Vinod Koul <vkoul@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Andy Gross <agross@...nel.org>
Subject: [PATCH v2 10/10] arm64: dts: qcom: sa8155p-adp: Add base dts file
Add base DTS file for SA8155p Automotive Development Platform.
It enables boot to console, adds tlmm reserved range and ufs flash.
It also includes pmic file.
SA8155p-adp board is based on sa8155p Qualcomm Snapdragon SoC.
SA8155p platform is similar to the SM8150, so use this as base
for now.
Cc: Linus Walleij <linus.walleij@...aro.org>
Cc: Liam Girdwood <lgirdwood@...il.com>
Cc: Mark Brown <broonie@...nel.org>
Cc: Bjorn Andersson <bjorn.andersson@...aro.org>
Cc: Vinod Koul <vkoul@...nel.org>
Cc: Rob Herring <robh+dt@...nel.org>
Cc: Andy Gross <agross@...nel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@...aro.org>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 355 +++++++++++++++++++++++
2 files changed, 356 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sa8155p-adp.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 456502aeee49..666f3528697d 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -32,6 +32,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-oneplus-dumpling.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb
dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1-lte.dtb
diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
new file mode 100644
index 000000000000..95e0a6612e6b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
@@ -0,0 +1,355 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "sm8150.dtsi"
+#include "pmm8155au_1.dtsi"
+#include "pmm8155au_2.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. SA8155P ADP";
+ compatible = "qcom,sa8155p-adp", "qcom,sa8155p";
+
+ aliases {
+ serial0 = &uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ vreg_3p3: vreg_3p3_regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_3p3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ /*
+ * S4A is always on and not controllable through RPMh.
+ * So model it as a fixed regulator.
+ */
+ vreg_s4a_1p8: smps4 {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_s4a_1p8";
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+
+ vin-supply = <&vreg_3p3>;
+ };
+};
+
+&apps_rsc {
+ pmm8155au-1-rpmh-regulators {
+ compatible = "qcom,pmm8155au-rpmh-regulators";
+ qcom,pmic-id = "a";
+
+ vdd-s1-supply = <&vreg_3p3>;
+ vdd-s2-supply = <&vreg_3p3>;
+ vdd-s3-supply = <&vreg_3p3>;
+ vdd-s4-supply = <&vreg_3p3>;
+ vdd-s5-supply = <&vreg_3p3>;
+ vdd-s6-supply = <&vreg_3p3>;
+ vdd-s7-supply = <&vreg_3p3>;
+ vdd-s8-supply = <&vreg_3p3>;
+ vdd-s9-supply = <&vreg_3p3>;
+ vdd-s10-supply = <&vreg_3p3>;
+
+ vdd-l1-l8-l11-supply = <&vreg_s6a_0p92>;
+ vdd-l2-l10-supply = <&vreg_3p3>;
+ vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p92>;
+ vdd-l6-l9-supply = <&vreg_s6a_0p92>;
+ vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
+ vdd-l13-l16-l17-supply = <&vreg_3p3>;
+
+ vreg_s5a_2p04: smps5 {
+ regulator-name = "vreg_s5a_2p04";
+ regulator-min-microvolt = <1904000>;
+ regulator-max-microvolt = <2000000>;
+ };
+
+ vreg_s6a_0p92: smps6 {
+ regulator-name = "vreg_s6a_0p92";
+ regulator-min-microvolt = <920000>;
+ regulator-max-microvolt = <1128000>;
+ };
+
+ vreg_l1a_0p752: ldo1 {
+ regulator-name = "vreg_l1a_0p752";
+ regulator-min-microvolt = <752000>;
+ regulator-max-microvolt = <752000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdda_usb_hs_3p1:
+ vreg_l2a_3p072: ldo2 {
+ regulator-name = "vreg_l2a_3p072";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3a_0p8: ldo3 {
+ regulator-name = "vreg_l3a_0p8";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_usb_hs_core:
+ vdda_usb_ss_dp_core_1:
+ vreg_l5a_0p88: ldo5 {
+ regulator-name = "vreg_l5a_0p88";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7a_1p8: ldo7 {
+ regulator-name = "vreg_l7a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10a_2p96: ldo10 {
+ regulator-name = "vreg_l10a_2p96";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11a_0p8: ldo11 {
+ regulator-name = "vreg_l11a_0p8";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdda_usb_hs_1p8:
+ vreg_l12a_1p8: ldo12 {
+ regulator-name = "vreg_l12a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13a_2p7: ldo13 {
+ regulator-name = "vreg_l13a_2p7";
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2704000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15a_1p7: ldo15 {
+ regulator-name = "vreg_l15a_1p7";
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <1704000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16a_2p7: ldo16 {
+ regulator-name = "vreg_l16a_2p7";
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17a_2p96: ldo17 {
+ regulator-name = "vreg_l17a_2p96";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ pmm8155au-2-rpmh-regulators {
+ compatible = "qcom,pmm8155au-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-s1-supply = <&vreg_3p3>;
+ vdd-s2-supply = <&vreg_3p3>;
+ vdd-s3-supply = <&vreg_3p3>;
+ vdd-s4-supply = <&vreg_3p3>;
+ vdd-s5-supply = <&vreg_3p3>;
+ vdd-s6-supply = <&vreg_3p3>;
+ vdd-s7-supply = <&vreg_3p3>;
+ vdd-s8-supply = <&vreg_3p3>;
+ vdd-s9-supply = <&vreg_3p3>;
+ vdd-s10-supply = <&vreg_3p3>;
+
+ vdd-l1-l8-l11-supply = <&vreg_s4c_1p352>;
+ vdd-l2-l10-supply = <&vreg_3p3>;
+ vdd-l3-l4-l5-l18-supply = <&vreg_s4c_1p352>;
+ vdd-l6-l9-supply = <&vreg_s6c_1p128>;
+ vdd-l7-l12-l14-l15-supply = <&vreg_s5c_2p04>;
+ vdd-l13-l16-l17-supply = <&vreg_3p3>;
+
+ vreg_s4c_1p352: smps4 {
+ regulator-name = "vreg_s4c_1p352";
+ regulator-min-microvolt = <1352000>;
+ regulator-max-microvolt = <1352000>;
+ };
+
+ vreg_s5c_2p04: smps5 {
+ regulator-name = "vreg_s5c_2p04";
+ regulator-min-microvolt = <1904000>;
+ regulator-max-microvolt = <2000000>;
+ };
+
+ vreg_s6c_1p128: smps6 {
+ regulator-name = "vreg_s6c_1p128";
+ regulator-min-microvolt = <1128000>;
+ regulator-max-microvolt = <1128000>;
+ };
+
+ vreg_l1c_1p304: ldo1 {
+ regulator-name = "vreg_l1c_1p304";
+ regulator-min-microvolt = <1304000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c_1p808: ldo2 {
+ regulator-name = "vreg_l2c_1p808";
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5c_1p2: ldo5 {
+ regulator-name = "vreg_l5c_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7c_1p8: ldo7 {
+ regulator-name = "vreg_l7c_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8c_1p2: ldo8 {
+ regulator-name = "vreg_l8c_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10c_3p3: ldo10 {
+ regulator-name = "vreg_l10c_3p3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11c_0p8: ldo11 {
+ regulator-name = "vreg_l11c_0p8";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12c_1p808: ldo12 {
+ regulator-name = "vreg_l12c_1p808";
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13c_2p96: ldo13 {
+ regulator-name = "vreg_l13c_2p96";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15c_1p9: ldo15 {
+ regulator-name = "vreg_l15c_1p9";
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16c_3p008: ldo16 {
+ regulator-name = "vreg_l16c_3p008";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l18c_0p88: ldo18 {
+ regulator-name = "vreg_l18c_0p88";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&tlmm {
+ gpio-reserved-ranges = <0 4>;
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&ufs_mem_hc {
+ status = "okay";
+
+ reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+
+ vcc-supply = <&vreg_l10a_2p96>;
+ vcc-max-microamp = <750000>;
+ vccq-supply = <&vreg_l5c_1p2>;
+ vccq-max-microamp = <700000>;
+ vccq2-supply = <&vreg_s4a_1p8>;
+ vccq2-max-microamp = <750000>;
+};
+
+&ufs_mem_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l8c_1p2>;
+ vdda-max-microamp = <87100>;
+ vdda-pll-supply = <&vreg_l5a_0p88>;
+ vdda-pll-max-microamp = <18300>;
+};
+
+
+&usb_1_hsphy {
+ status = "okay";
+ vdda-pll-supply = <&vdd_usb_hs_core>;
+ vdda33-supply = <&vdda_usb_hs_3p1>;
+ vdda18-supply = <&vdda_usb_hs_1p8>;
+};
+
+&usb_1_qmpphy {
+ status = "okay";
+ vdda-phy-supply = <&vreg_l8c_1p2>;
+ vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
+};
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ dr_mode = "peripheral";
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
--
2.31.1
Powered by blists - more mailing lists