| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210616132641.29087-3-prabhakar.mahadev-lad.rj@bp.renesas.com>
Date: Wed, 16 Jun 2021 14:26:40 +0100
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
To: Geert Uytterhoeven <geert+renesas@...der.be>,
Rob Herring <robh+dt@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-renesas-soc@...r.kernel.org, linux-gpio@...r.kernel.org,
Prabhakar <prabhakar.csengg@...il.com>,
Biju Das <biju.das.jz@...renesas.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
Subject: [PATCH 2/3] pinctrl: renesas: Add RZ/G2L pin and gpio controller core wrapper
Add core support for pin and gpio controller.
Based on a patch in the BSP by Hien Huynh <hien.huynh.px@...esas.com>.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
Reviewed-by: Biju Das <biju.das.jz@...renesas.com>
---
drivers/pinctrl/renesas/Kconfig | 11 +
drivers/pinctrl/renesas/Makefile | 1 +
drivers/pinctrl/renesas/pinctrl-rzg2l.c | 530 ++++++++++++++++++++++++
drivers/pinctrl/renesas/pinctrl-rzg2l.h | 94 +++++
4 files changed, 636 insertions(+)
create mode 100644 drivers/pinctrl/renesas/pinctrl-rzg2l.c
create mode 100644 drivers/pinctrl/renesas/pinctrl-rzg2l.h
diff --git a/drivers/pinctrl/renesas/Kconfig b/drivers/pinctrl/renesas/Kconfig
index 4b84a744ae87..2b4ac226ce35 100644
--- a/drivers/pinctrl/renesas/Kconfig
+++ b/drivers/pinctrl/renesas/Kconfig
@@ -176,6 +176,17 @@ config PINCTRL_RZA2
help
This selects GPIO and pinctrl driver for Renesas RZ/A2 platforms.
+config PINCTRL_RZG2L
+ bool "pin control support for RZ/G2L family"
+ depends on OF
+ depends on ARCH_R9A07G044 || COMPILE_TEST
+ select GPIOLIB
+ select GENERIC_PINCTRL_GROUPS
+ select GENERIC_PINMUX_FUNCTIONS
+ select GENERIC_PINCONF
+ help
+ This enables common pin control functionality for platforms based on RZ/G2L family.
+
config PINCTRL_PFC_R8A77470
bool "pin control support for RZ/G1C" if COMPILE_TEST
select PINCTRL_SH_PFC
diff --git a/drivers/pinctrl/renesas/Makefile b/drivers/pinctrl/renesas/Makefile
index 353563228dc2..7d9238a9ef57 100644
--- a/drivers/pinctrl/renesas/Makefile
+++ b/drivers/pinctrl/renesas/Makefile
@@ -46,6 +46,7 @@ obj-$(CONFIG_PINCTRL_PFC_SHX3) += pfc-shx3.o
obj-$(CONFIG_PINCTRL_RZA1) += pinctrl-rza1.o
obj-$(CONFIG_PINCTRL_RZA2) += pinctrl-rza2.o
+obj-$(CONFIG_PINCTRL_RZG2L) += pinctrl-rzg2l.o
obj-$(CONFIG_PINCTRL_RZN1) += pinctrl-rzn1.o
ifeq ($(CONFIG_COMPILE_TEST),y)
diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
new file mode 100644
index 000000000000..b9730b53fd85
--- /dev/null
+++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
@@ -0,0 +1,530 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas RZ/G2L Pin Control and GPIO driver core
+ *
+ * Copyright (C) 2021 Renesas Electronics Corporation.
+ */
+
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#include "pinctrl-rzg2l.h"
+
+#define DRV_NAME "pinctrl-rzg2l"
+
+#define P(n) (0x0000 + 0x10 + (n))
+#define PM(n) (0x0100 + 0x20 + (n) * 2)
+#define PMC(n) (0x0200 + 0x10 + (n))
+#define PFC(n) (0x0400 + 0x40 + (n) * 4)
+#define PIN(n) (0x0800 + 0x10 + (n))
+#define PWPR (0x3014)
+
+#define PWPR_B0WI BIT(7) /* Bit Write Disable */
+#define PWPR_PFCWE BIT(6) /* PFC Register Write Enable */
+
+#define PM_MASK 0x03
+#define PFC_MASK 0x07
+
+#define PM_INPUT 0x1
+#define PM_OUTPUT 0x2
+#define PM_OUTPUT_INPUT 0x3
+
+#define GPIOF_OUTPUT 0
+#define GPIOF_INPUT 1
+#define GPIOF_BIDIRECTION 2
+#define GPIOF_HI_Z 3
+
+#define RZG2L_PIN_ID_TO_PORT(id) ((id) / RZG2L_MAX_PINS_PER_PORT)
+#define RZG2L_PIN_ID_TO_PIN(id) ((id) % RZG2L_MAX_PINS_PER_PORT)
+
+struct rzg2l_pinctrl {
+ struct pinctrl_dev *pctrl_dev;
+ struct pinctrl_desc pctrl_desc;
+
+ void __iomem *base;
+ struct device *dev;
+ struct clk *clk;
+
+ struct gpio_chip gpio_chip;
+ struct pinctrl_gpio_range gpio_range;
+
+ const struct rzg2l_pin_soc *psoc;
+
+ spinlock_t lock;
+ unsigned int nports;
+};
+
+static void rzg2l_pinctrl_set_pfc_mode(struct rzg2l_pinctrl *pctrl,
+ int pins, unsigned long pfc_mode)
+{
+ u32 port = RZG2L_PIN_ID_TO_PORT(pins);
+ u8 bit = RZG2L_PIN_ID_TO_PIN(pins);
+ unsigned long flags;
+ u32 reg32, mask32;
+ u16 reg16, mask16;
+ u8 reg8;
+
+ spin_lock_irqsave(&pctrl->lock, flags);
+
+ /* Set pin to 'Non-use (Hi-Z input protection)' */
+ reg16 = readw(pctrl->base + PM(port));
+ mask16 = PM_MASK << (bit * 2);
+ reg16 = reg16 & ~mask16;
+ writew(reg16, pctrl->base + PM(port));
+
+ /* Temporarily switch to GPIO mode with PMC register */
+ reg8 = readb(pctrl->base + PMC(port));
+ writeb(reg8 & ~BIT(bit), pctrl->base + PMC(port));
+
+ /* Set the PWPR register to allow PFC register to write */
+ writel(0x00, pctrl->base + PWPR); /* B0WI=0, PFCWE=0 */
+ writel(PWPR_PFCWE, pctrl->base + PWPR); /* B0WI=0, PFCWE=1 */
+
+ /* Select Pin function mode with PFC register */
+ reg32 = readl(pctrl->base + PFC(port));
+ mask32 = PFC_MASK << (bit * 4);
+ reg32 = reg32 & ~mask32;
+ pfc_mode = pfc_mode << (bit * 4);
+ writel(reg32 | pfc_mode, pctrl->base + PFC(port));
+
+ /* Set the PWPR register to be write-protected */
+ writel(0x00, pctrl->base + PWPR); /* B0WI=0, PFCWE=0 */
+ writel(PWPR_B0WI, pctrl->base + PWPR); /* B0WI=1, PFCWE=0 */
+
+ /* Switch to Peripheral pin function with PMC register */
+ reg8 = readb(pctrl->base + PMC(port));
+ writeb(reg8 | BIT(bit), pctrl->base + PMC(port));
+
+ spin_unlock_irqrestore(&pctrl->lock, flags);
+};
+
+static int rzg2l_pinctrl_set_mux(struct pinctrl_dev *pctldev,
+ unsigned int func_selector,
+ unsigned int group_selector)
+{
+ struct rzg2l_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+ struct function_desc *func;
+ struct group_desc *group;
+ unsigned long data;
+ int *pins;
+ int i;
+
+ func = pinmux_generic_get_function(pctldev, func_selector);
+ if (!func)
+ return -EINVAL;
+ group = pinctrl_generic_get_group(pctldev, group_selector);
+ if (!group)
+ return -EINVAL;
+
+ pins = group->pins;
+ data = (unsigned long)group->data;
+
+ dev_dbg(pctldev->dev, "enable function %s group %s\n",
+ func->name, group->name);
+
+ for (i = 0; i < group->num_pins; i++)
+ rzg2l_pinctrl_set_pfc_mode(pctrl, *(pins + i), data);
+
+ return 0;
+};
+
+static const struct pinctrl_ops rzg2l_pinctrl_pctlops = {
+ .get_groups_count = pinctrl_generic_get_group_count,
+ .get_group_name = pinctrl_generic_get_group_name,
+ .get_group_pins = pinctrl_generic_get_group_pins,
+ .dt_node_to_map = pinconf_generic_dt_node_to_map_all,
+ .dt_free_map = pinconf_generic_dt_free_map,
+};
+
+static const struct pinmux_ops rzg2l_pinctrl_pmxops = {
+ .get_functions_count = pinmux_generic_get_function_count,
+ .get_function_name = pinmux_generic_get_function_name,
+ .get_function_groups = pinmux_generic_get_function_groups,
+ .set_mux = rzg2l_pinctrl_set_mux,
+ .strict = true,
+};
+
+static int rzg2l_pinctrl_add_groups(struct rzg2l_pinctrl *pctrl)
+{
+ int ret, i;
+
+ for (i = 0; i < pctrl->psoc->ngroups; i++) {
+ const struct group_desc *group = pctrl->psoc->groups + i;
+
+ ret = pinctrl_generic_add_group(pctrl->pctrl_dev, group->name,
+ group->pins, group->num_pins,
+ group->data);
+ if (ret < 0) {
+ dev_err(pctrl->dev, "Failed to register group %s\n",
+ group->name);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int rzg2l_pinctrl_add_functions(struct rzg2l_pinctrl *pctrl)
+{
+ int ret, i;
+
+ for (i = 0; i < pctrl->psoc->nfuncs; i++) {
+ const struct function_desc *func = pctrl->psoc->funcs + i;
+
+ ret = pinmux_generic_add_function(pctrl->pctrl_dev, func->name,
+ func->group_names,
+ func->num_group_names,
+ func->data);
+ if (ret < 0) {
+ dev_err(pctrl->dev, "Failed to register function %s\n",
+ func->name);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int rzg2l_gpio_request(struct gpio_chip *chip, unsigned int offset)
+{
+ struct rzg2l_pinctrl *pctrl = gpiochip_get_data(chip);
+ u32 port = RZG2L_PIN_ID_TO_PORT(offset);
+ u8 bit = RZG2L_PIN_ID_TO_PIN(offset);
+ unsigned long flags;
+ u8 reg8;
+ int ret;
+
+ ret = pinctrl_gpio_request(chip->base + offset);
+ if (ret)
+ return ret;
+
+ spin_lock_irqsave(&pctrl->lock, flags);
+
+ /* Select GPIO mode in PMC Register */
+ reg8 = readb(pctrl->base + PMC(port));
+ reg8 &= ~BIT(bit);
+ writeb(reg8, pctrl->base + PMC(port));
+
+ spin_unlock_irqrestore(&pctrl->lock, flags);
+
+ return 0;
+}
+
+static void rzg2l_gpio_set_direction(struct rzg2l_pinctrl *pctrl, u32 port,
+ u8 bit, bool output)
+{
+ unsigned long flags;
+ u16 reg16;
+
+ spin_lock_irqsave(&pctrl->lock, flags);
+
+ reg16 = readw(pctrl->base + PM(port));
+ reg16 = reg16 & ~(PM_MASK << (bit * 2));
+
+ if (output)
+ writew(reg16 | (PM_OUTPUT << (bit * 2)),
+ pctrl->base + PM(port));
+ else
+ writew(reg16 | (PM_INPUT << (bit * 2)),
+ pctrl->base + PM(port));
+
+ spin_unlock_irqrestore(&pctrl->lock, flags);
+}
+
+static int rzg2l_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
+{
+ struct rzg2l_pinctrl *pctrl = gpiochip_get_data(chip);
+ u32 port = RZG2L_PIN_ID_TO_PORT(offset);
+ u8 bit = RZG2L_PIN_ID_TO_PIN(offset);
+
+ if (!(readb(pctrl->base + PMC(port)) & BIT(bit))) {
+ u16 reg16;
+
+ reg16 = readw(pctrl->base + PM(port));
+ reg16 = (reg16 >> (bit * 2)) & PM_MASK;
+ if (reg16 == PM_OUTPUT)
+ return GPIOF_OUTPUT;
+ else if (reg16 == PM_INPUT)
+ return GPIOF_INPUT;
+ else if (reg16 == PM_OUTPUT_INPUT)
+ return GPIOF_BIDIRECTION;
+ else
+ return GPIOF_HI_Z;
+ } else {
+ return -EINVAL;
+ }
+}
+
+static int rzg2l_gpio_direction_input(struct gpio_chip *chip,
+ unsigned int offset)
+{
+ struct rzg2l_pinctrl *pctrl = gpiochip_get_data(chip);
+ u32 port = RZG2L_PIN_ID_TO_PORT(offset);
+ u8 bit = RZG2L_PIN_ID_TO_PIN(offset);
+
+ rzg2l_gpio_set_direction(pctrl, port, bit, false);
+
+ return 0;
+}
+
+static void rzg2l_gpio_set(struct gpio_chip *chip, unsigned int offset,
+ int value)
+{
+ struct rzg2l_pinctrl *pctrl = gpiochip_get_data(chip);
+ u32 port = RZG2L_PIN_ID_TO_PORT(offset);
+ u8 bit = RZG2L_PIN_ID_TO_PIN(offset);
+ unsigned long flags;
+ u8 reg8;
+
+ spin_lock_irqsave(&pctrl->lock, flags);
+
+ reg8 = readb(pctrl->base + P(port));
+
+ if (value)
+ writeb(reg8 | BIT(bit), pctrl->base + P(port));
+ else
+ writeb(reg8 & ~BIT(bit), pctrl->base + P(port));
+
+ spin_unlock_irqrestore(&pctrl->lock, flags);
+}
+
+static int rzg2l_gpio_direction_output(struct gpio_chip *chip,
+ unsigned int offset, int value)
+{
+ struct rzg2l_pinctrl *pctrl = gpiochip_get_data(chip);
+ u32 port = RZG2L_PIN_ID_TO_PORT(offset);
+ u8 bit = RZG2L_PIN_ID_TO_PIN(offset);
+
+ rzg2l_gpio_set_direction(pctrl, port, bit, true);
+ rzg2l_gpio_set(chip, offset, value);
+
+ return 0;
+}
+
+static int rzg2l_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+ struct rzg2l_pinctrl *pctrl = gpiochip_get_data(chip);
+ u32 port = RZG2L_PIN_ID_TO_PORT(offset);
+ u8 bit = RZG2L_PIN_ID_TO_PIN(offset);
+ u16 reg16;
+
+ reg16 = readw(pctrl->base + PM(port));
+ reg16 = (reg16 >> (bit * 2)) & PM_MASK;
+
+ if (reg16 == PM_INPUT || reg16 == PM_OUTPUT_INPUT)
+ return !!(readb(pctrl->base + PIN(port)) & BIT(bit));
+ else if (reg16 == PM_OUTPUT)
+ return !!(readb(pctrl->base + P(port)) & BIT(bit));
+ else
+ return -EINVAL;
+}
+
+static void rzg2l_gpio_free(struct gpio_chip *chip, unsigned int offset)
+{
+ pinctrl_gpio_free(chip->base + offset);
+
+ /*
+ * Set the GPIO as an input to ensure that the next GPIO request won't
+ * drive the GPIO pin as an output.
+ */
+ rzg2l_gpio_direction_input(chip, offset);
+}
+
+static const char * const rzg2l_gpio_names[] = {
+ "P0_0", "P0_1", "P0_2", "P0_3", "P0_4", "P0_5", "P0_6", "P0_7",
+ "P1_0", "P1_1", "P1_2", "P1_3", "P1_4", "P1_5", "P1_6", "P1_7",
+ "P2_0", "P2_1", "P2_2", "P2_3", "P2_4", "P2_5", "P2_6", "P2_7",
+ "P3_0", "P3_1", "P3_2", "P3_3", "P3_4", "P3_5", "P3_6", "P3_7",
+ "P4_0", "P4_1", "P4_2", "P4_3", "P4_4", "P4_5", "P4_6", "P4_7",
+ "P5_0", "P5_1", "P5_2", "P5_3", "P5_4", "P5_5", "P5_6", "P5_7",
+ "P6_0", "P6_1", "P6_2", "P6_3", "P6_4", "P6_5", "P6_6", "P6_7",
+ "P7_0", "P7_1", "P7_2", "P7_3", "P7_4", "P7_5", "P7_6", "P7_7",
+ "P8_0", "P8_1", "P8_2", "P8_3", "P8_4", "P8_5", "P8_6", "P8_7",
+ "P9_0", "P9_1", "P9_2", "P9_3", "P9_4", "P9_5", "P9_6", "P9_7",
+ "P10_0", "P10_1", "P10_2", "P10_3", "P10_4", "P10_5", "P10_6", "P10_7",
+ "P11_0", "P11_1", "P11_2", "P11_3", "P11_4", "P11_5", "P11_6", "P11_7",
+ "P12_0", "P12_1", "P12_2", "P12_3", "P12_4", "P12_5", "P12_6", "P12_7",
+ "P13_0", "P13_1", "P13_2", "P13_3", "P13_4", "P13_5", "P13_6", "P13_7",
+ "P14_0", "P14_1", "P14_2", "P14_3", "P14_4", "P14_5", "P14_6", "P14_7",
+ "P15_0", "P15_1", "P15_2", "P15_3", "P15_4", "P15_5", "P15_6", "P15_7",
+ "P16_0", "P16_1", "P16_2", "P16_3", "P16_4", "P16_5", "P16_6", "P16_7",
+ "P17_0", "P17_1", "P17_2", "P17_3", "P17_4", "P17_5", "P17_6", "P17_7",
+ "P18_0", "P18_1", "P18_2", "P18_3", "P18_4", "P18_5", "P18_6", "P18_7",
+ "P19_0", "P19_1", "P19_2", "P19_3", "P19_4", "P19_5", "P19_6", "P19_7",
+ "P20_0", "P20_1", "P20_2", "P20_3", "P20_4", "P20_5", "P20_6", "P20_7",
+ "P21_0", "P21_1", "P21_2", "P21_3", "P21_4", "P21_5", "P21_6", "P21_7",
+ "P22_0", "P22_1", "P22_2", "P22_3", "P22_4", "P22_5", "P22_6", "P22_7",
+ "P23_0", "P23_1", "P23_2", "P23_3", "P23_4", "P23_5", "P23_6", "P23_7",
+ "P24_0", "P24_1", "P24_2", "P24_3", "P24_4", "P24_5", "P24_6", "P24_7",
+ "P25_0", "P25_1", "P25_2", "P25_3", "P25_4", "P25_5", "P25_6", "P25_7",
+ "P26_0", "P26_1", "P26_2", "P26_3", "P26_4", "P26_5", "P26_6", "P26_7",
+ "P27_0", "P27_1", "P27_2", "P27_3", "P27_4", "P27_5", "P27_6", "P27_7",
+ "P28_0", "P28_1", "P28_2", "P28_3", "P28_4", "P28_5", "P28_6", "P28_7",
+ "P29_0", "P29_1", "P29_2", "P29_3", "P29_4", "P29_5", "P29_6", "P29_7",
+ "P30_0", "P30_1", "P30_2", "P30_3", "P30_4", "P30_5", "P30_6", "P30_7",
+ "P31_0", "P31_1", "P31_2", "P31_3", "P31_4", "P31_5", "P31_6", "P31_7",
+ "P32_0", "P32_1", "P32_2", "P32_3", "P32_4", "P32_5", "P32_6", "P32_7",
+ "P33_0", "P33_1", "P33_2", "P33_3", "P33_4", "P33_5", "P33_6", "P33_7",
+ "P34_0", "P34_1", "P34_2", "P34_3", "P34_4", "P34_5", "P34_6", "P34_7",
+ "P35_0", "P35_1", "P35_2", "P35_3", "P35_4", "P35_5", "P35_6", "P35_7",
+ "P36_0", "P36_1", "P36_2", "P36_3", "P36_4", "P36_5", "P36_6", "P36_7",
+ "P37_0", "P37_1", "P37_2", "P37_3", "P37_4", "P37_5", "P37_6", "P37_7",
+ "P38_0", "P38_1", "P38_2", "P38_3", "P38_4", "P38_5", "P38_6", "P38_7",
+ "P39_0", "P39_1", "P39_2", "P39_3", "P39_4", "P39_5", "P39_6", "P39_7",
+ "P40_0", "P40_1", "P40_2", "P40_3", "P40_4", "P40_5", "P40_6", "P40_7",
+ "P41_0", "P41_1", "P41_2", "P41_3", "P41_4", "P41_5", "P41_6", "P41_7",
+ "P42_0", "P42_1", "P42_2", "P42_3", "P42_4", "P42_5", "P42_6", "P42_7",
+ "P43_0", "P43_1", "P43_2", "P43_3", "P43_4", "P43_5", "P43_6", "P43_7",
+ "P44_0", "P44_1", "P44_2", "P44_3", "P44_4", "P44_5", "P44_6", "P44_7",
+ "P45_0", "P45_1", "P45_2", "P45_3", "P45_4", "P45_5", "P45_6", "P45_7",
+ "P46_0", "P46_1", "P46_2", "P46_3", "P46_4", "P46_5", "P46_6", "P46_7",
+ "P47_0", "P47_1", "P47_2", "P47_3", "P47_4", "P47_5", "P47_6", "P47_7",
+ "P48_0", "P48_1", "P48_2", "P48_3", "P48_4", "P48_5", "P48_6", "P48_7",
+};
+
+static int rzg2l_gpio_register(struct rzg2l_pinctrl *pctrl)
+{
+ struct device_node *np = pctrl->dev->of_node;
+ struct gpio_chip *chip = &pctrl->gpio_chip;
+ const char *name = dev_name(pctrl->dev);
+ struct of_phandle_args of_args;
+ int ret;
+
+ ret = of_parse_phandle_with_fixed_args(np, "gpio-ranges", 3, 0, &of_args);
+ if (ret) {
+ dev_err(pctrl->dev, "Unable to parse gpio-ranges\n");
+ return ret;
+ }
+
+ if (of_args.args[0] != 0 || of_args.args[1] != 0 ||
+ of_args.args[2] != ARRAY_SIZE(rzg2l_gpio_names)) {
+ dev_err(pctrl->dev, "gpio-ranges does not match selected SOC\n");
+ return -EINVAL;
+ }
+
+ chip->names = rzg2l_gpio_names;
+ chip->request = rzg2l_gpio_request;
+ chip->free = rzg2l_gpio_free;
+ chip->get_direction = rzg2l_gpio_get_direction;
+ chip->direction_input = rzg2l_gpio_direction_input;
+ chip->direction_output = rzg2l_gpio_direction_output;
+ chip->get = rzg2l_gpio_get;
+ chip->set = rzg2l_gpio_set;
+ chip->label = name;
+ chip->parent = pctrl->dev;
+ chip->owner = THIS_MODULE;
+ chip->base = -1;
+ chip->ngpio = of_args.args[2];
+
+ pctrl->gpio_range.id = 0;
+ pctrl->gpio_range.pin_base = 0;
+ pctrl->gpio_range.base = 0;
+ pctrl->gpio_range.npins = chip->ngpio;
+ pctrl->gpio_range.name = chip->label;
+ pctrl->gpio_range.gc = chip;
+ ret = devm_gpiochip_add_data(pctrl->dev, chip, pctrl);
+ if (ret) {
+ dev_err(pctrl->dev, "failed to add GPIO controller\n");
+ return ret;
+ }
+
+ dev_dbg(pctrl->dev, "Registered gpio controller\n");
+
+ return 0;
+}
+
+static int rzg2l_pinctrl_probe(struct platform_device *pdev)
+{
+ const struct rzg2l_pin_soc *psoc;
+ struct rzg2l_pinctrl *pctrl;
+ int ret;
+
+ psoc = of_device_get_match_data(&pdev->dev);
+ if (!psoc)
+ return -EINVAL;
+
+ pctrl = devm_kzalloc(&pdev->dev, sizeof(*pctrl), GFP_KERNEL);
+ if (!pctrl)
+ return -ENOMEM;
+
+ pctrl->psoc = psoc;
+ pctrl->nports = psoc->nports;
+ pctrl->dev = &pdev->dev;
+
+ pctrl->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(pctrl->base))
+ return PTR_ERR(pctrl->base);
+
+ pctrl->clk = devm_clk_get(pctrl->dev, NULL);
+ if (IS_ERR(pctrl->clk)) {
+ ret = PTR_ERR(pctrl->clk);
+ dev_err(pctrl->dev, "failed to get GPIO clk : %i\n", ret);
+ return ret;
+ };
+
+ spin_lock_init(&pctrl->lock);
+
+ pctrl->pctrl_desc.name = DRV_NAME;
+ pctrl->pctrl_desc.pins = pctrl->psoc->pins;
+ pctrl->pctrl_desc.npins = pctrl->psoc->npins;
+ pctrl->pctrl_desc.pctlops = &rzg2l_pinctrl_pctlops;
+ pctrl->pctrl_desc.pmxops = &rzg2l_pinctrl_pmxops;
+ pctrl->pctrl_desc.owner = THIS_MODULE;
+
+ ret = devm_pinctrl_register_and_init(pctrl->dev, &pctrl->pctrl_desc,
+ pctrl, &pctrl->pctrl_dev);
+ if (ret) {
+ dev_err(pctrl->dev, "could not register: %i\n", ret);
+ return ret;
+ };
+
+ ret = rzg2l_pinctrl_add_groups(pctrl);
+ if (ret)
+ return ret;
+
+ ret = rzg2l_pinctrl_add_functions(pctrl);
+ if (ret)
+ return ret;
+
+ ret = pinctrl_enable(pctrl->pctrl_dev);
+ if (ret)
+ return ret;
+
+ ret = rzg2l_gpio_register(pctrl);
+ if (ret) {
+ dev_err(pctrl->dev, "failed to add GPIO chip: %i\n", ret);
+ return ret;
+ };
+
+ ret = clk_prepare_enable(pctrl->clk);
+ if (ret) {
+ dev_err(pctrl->dev, "failed to enable GPIO clk: %i\n", ret);
+ return ret;
+ };
+
+ platform_set_drvdata(pdev, pctrl);
+
+ dev_info(pctrl->dev, "%s support registered\n", DRV_NAME);
+ return 0;
+}
+
+static const struct of_device_id rzg2l_pinctrl_of_table[] = {
+ { /* sentinel */ }
+};
+
+static struct platform_driver rzg2l_pinctrl_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .of_match_table = of_match_ptr(rzg2l_pinctrl_of_table),
+ },
+ .probe = rzg2l_pinctrl_probe,
+};
+
+static int __init rzg2l_pinctrl_init(void)
+{
+ return platform_driver_register(&rzg2l_pinctrl_driver);
+}
+subsys_initcall_sync(rzg2l_pinctrl_init);
diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.h b/drivers/pinctrl/renesas/pinctrl-rzg2l.h
new file mode 100644
index 000000000000..39135e5bc04e
--- /dev/null
+++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.h
@@ -0,0 +1,94 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Renesas RZ/G2L Pin Function Controller and GPIO support
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#ifndef __PINCTRL_RZG2L_H__
+#define __PINCTRL_RZG2L_H__
+
+#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/clk.h>
+#include <linux/reset.h>
+#include <linux/phy.h>
+
+#include "../core.h"
+#include "../pinconf.h"
+#include "../pinmux.h"
+
+#define RZG2L_MAX_PINS_PER_PORT 8
+
+struct rzg2l_pin_soc {
+ const struct pinctrl_pin_desc *pins;
+ const unsigned int npins;
+ const struct group_desc *groups;
+ const unsigned int ngroups;
+ const struct function_desc *funcs;
+ const unsigned int nfuncs;
+ const unsigned int nports;
+};
+
+#define RZ_G2L_PINCTRL_PIN_GPIO(port, configs) \
+ { \
+ (RZG2L_MAX_PINS_PER_PORT) * (port), \
+ __stringify(P##port##_0), \
+ (void *)(configs), \
+ }, \
+ { \
+ (RZG2L_MAX_PINS_PER_PORT) * (port) + 1, \
+ __stringify(P##port##_1), \
+ (void *)(configs), \
+ }, \
+ { \
+ (RZG2L_MAX_PINS_PER_PORT) * (port) + 2, \
+ __stringify(P##port##_2), \
+ (void *)(configs), \
+ }, \
+ { \
+ (RZG2L_MAX_PINS_PER_PORT) * (port) + 3, \
+ __stringify(P##port##_3), \
+ (void *)(configs), \
+ }, \
+ { \
+ (RZG2L_MAX_PINS_PER_PORT) * (port) + 4, \
+ __stringify(P##port##_4), \
+ (void *)(configs), \
+ }, \
+ { \
+ (RZG2L_MAX_PINS_PER_PORT) * (port) + 5, \
+ __stringify(P##port##_5), \
+ (void *)(configs), \
+ }, \
+ { \
+ (RZG2L_MAX_PINS_PER_PORT) * (port) + 6, \
+ __stringify(P##port##_6), \
+ (void *)(configs), \
+ }, \
+ { \
+ (RZG2L_MAX_PINS_PER_PORT) * (port) + 7, \
+ __stringify(P##port##_7), \
+ (void *)(configs), \
+ }
+
+#define RZ_G2L_PIN(port, bit) ((port) * RZG2L_MAX_PINS_PER_PORT + (bit))
+
+#define RZ_G2L_PINCTRL_PIN_GROUP(name, mode) \
+ { \
+ __stringify(name), \
+ name##_pins, \
+ ARRAY_SIZE(name##_pins), \
+ (void *)mode, \
+ }
+
+#define RZ_G2L_FN_DESC(id) { #id, id##_groups, ARRAY_SIZE(id##_groups) }
+
+#endif
--
2.17.1
Powered by blists - more mailing lists