| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <AM5PR0402MB2756584781B774A75378D28F880E9@AM5PR0402MB2756.eurprd04.prod.outlook.com>
Date: Thu, 17 Jun 2021 03:14:05 +0000
From: "Peng Fan (OSS)" <peng.fan@....nxp.com>
To: Adam Ford <aford173@...il.com>,
"Peng Fan (OSS)" <peng.fan@....nxp.com>
CC: Rob Herring <robh+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Sascha Hauer <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
dl-linux-imx <linux-imx@....com>,
Philipp Zabel <p.zabel@...gutronix.de>,
Lucas Stach <l.stach@...gutronix.de>,
Krzysztof Kozlowski <krzk@...nel.org>,
Guido Günther <agx@...xcpu.org>,
Marek Vasut <marex@...x.de>,
Andrey Smirnov <andrew.smirnov@...il.com>,
devicetree <devicetree@...r.kernel.org>,
arm-soc <linux-arm-kernel@...ts.infradead.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Jacky Bai <ping.bai@....com>,
Schrempf Frieder <frieder.schrempf@...tron.de>,
Abel Vesa <abel.vesa@....com>
Subject: RE: [PATCH V7 4/4] soc: imx: Add blk-ctl driver for i.MX8MM
> Subject: Re: [PATCH V7 4/4] soc: imx: Add blk-ctl driver for i.MX8MM
>
> On Tue, Jun 15, 2021 at 6:05 AM Peng Fan (OSS) <peng.fan@....nxp.com>
> wrote:
> >
> >
> > On 2021/6/15 3:29, Adam Ford wrote:
> > > On Mon, Jun 14, 2021 at 1:07 PM Adam Ford <aford173@...il.com>
> wrote:
> > >>
> > >> On Sat, Jun 12, 2021 at 7:58 AM Peng Fan (OSS) <peng.fan@....nxp.com>
> wrote:
> > >>>
> > >>> From: Peng Fan <peng.fan@....com>
> > >>>
> > >>> The i.MX8MM SoC has dispmix BLK-CTL and vpumix BLK-CTL, so we
> add
> > >>> that support in this driver.
> > >>>
> > >>> Reviewed-by: Abel Vesa <abel.vesa@....com>
> > >>> Signed-off-by: Peng Fan <peng.fan@....com>
> > >>
> > >> Maybe my TF-A is too old, but I am not able to wake the device from
> > >> suspend-to-ram with this series. I used the device tree from [1]
> > >> to enable both the GPCv2 and the blk-ctl stuff.
> > >>
> > >> [1] -
> > >> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fp
> > >>
> atchwork.kernel.org%2Fproject%2Flinux-arm-kernel%2Fpatch%2F20210604
> > >>
> 111005.6804-1-peng.fan%40oss.nxp.com%2F&data=04%7C01%7Cpeng.
> fan
> > >> %40nxp.com%7C29fe5fa2af704121c2d508d930b25126%7C686ea1d3bc
> 2b4c6fa92
> > >>
> cd99c5c301635%7C0%7C0%7C637594364693096718%7CUnknown%7CTWF
> pbGZsb3d8
> > >>
> eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3
> D%
> > >>
> 7C1000&sdata=owV810qvJWHnaoav%2BZDlpd%2FmjALiZkk0uWM44gqj
> jQ8%3D
> > >> &reserved=0
> > >>
> > >> I based both off Shawn's for-next branch.
> > >
> > > I tried to enable USB with the GPCv2 stuff pulled into Shawn's
> > > for-next branch, and my board hangs when USB is loaded, but USB
> > > doesn't use blk-ctl, it just uses GPCv2.
> > >
> > > I looked at some of the changes with GPCv2, and I noticed a comment
> > > in the GPCv2 function called imx_pgc_power_up. The comment reads:
> > >
> > > /*
> > > * ret = regmap_read_poll_timeout(domain->regmap, GPC_PU_PWRHSK,
> reg_val,
> > > * (reg_val & domain->bits.hskack), 0,
> > > * USEC_PER_MSEC);
> > > * Technically we need the commented code to wait handshake. But that
> > > needs
> > > * the BLK-CTL module BUS clk-en bit being set.
> > > *
> > > * There is a separate BLK-CTL module and we will have such a driver
> > > for it,
> > > * that driver will set the BUS clk-en bit and handshake will be
> > > triggered
> > > * automatically there. Just add a delay and suppose the handshake
> > > finish
> > > * after that.
> > > */
> > >
> > > I didn't see a delay here despite the comment saying we should add one.
> > >
> > > With the blk-ctl enabled, I attempted to uncomment the above line of
> > > code without much success in preventing the board from hanging.
> > >
> > > If BUS clk-en bit needs to be set in order for the handshake to
> > > work, should all these power domains reference it to bring it up?
> > > If we decide against using the BUS clk-en bit, what should this delay be?
> >
> > It is only for power domain has mix and need delay for the handshake.
> > USB no need that handshake.
>
> Don't the OTG domains depend on hsiomix?
It works well with this change in dtsi.
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 0e01ff649956..e930ae3122ec 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -1087,6 +1087,7 @@ usbotg1: usb@...40000 {
assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
fsl,usbphy = <&usbphynop1>;
fsl,usbmisc = <&usbmisc1 0>;
+ power-domains = <&pgc_otg1>;
status = "disabled";
};
@@ -1106,6 +1107,7 @@ usbotg2: usb@...50000 {
assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
fsl,usbphy = <&usbphynop2>;
fsl,usbmisc = <&usbmisc2 0>;
+ power-domains = <&pgc_otg2>;
status = "disabled";
};
Regards,
Peng.
>
> >
> > Could you post a github branch, then I could give a look?
>
> No problem.
>
> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.
> com%2Faford173%2Flinux%2Ftree%2Ffor-next&data=04%7C01%7Cpen
> g.fan%40nxp.com%7C29fe5fa2af704121c2d508d930b25126%7C686ea1d3bc
> 2b4c6fa92cd99c5c301635%7C0%7C0%7C637594364693106714%7CUnknow
> n%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1ha
> WwiLCJXVCI6Mn0%3D%7C1000&sdata=6tiEiL7TMioVeb88WKHTYxVPxE
> MT1pboN%2FSMxiKA1yM%3D&reserved=0
>
> thanks
>
> adam
>
> >
> > Thanks,
> > Peng.
> >
> > >
> > > adam
> > >>
> > >> adam
> > >>
> > >>> ---
> > >>> drivers/soc/imx/Makefile | 2 +-
> > >>> drivers/soc/imx/blk-ctl-imx8mm.c | 139
> +++++++++++++++++++++++++++++++
> > >>> 2 files changed, 140 insertions(+), 1 deletion(-)
> > >>> create mode 100644 drivers/soc/imx/blk-ctl-imx8mm.c
> > >>>
> > >>> diff --git a/drivers/soc/imx/Makefile b/drivers/soc/imx/Makefile
> > >>> index d3d2b49a386c..c260b962f495 100644
> > >>> --- a/drivers/soc/imx/Makefile
> > >>> +++ b/drivers/soc/imx/Makefile
> > >>> @@ -4,4 +4,4 @@ obj-$(CONFIG_ARCH_MXC) += soc-imx.o
> > >>> endif
> > >>> obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
> > >>> obj-$(CONFIG_IMX_GPCV2_PM_DOMAINS) += gpcv2.o
> > >>> -obj-$(CONFIG_SOC_IMX8M) += soc-imx8m.o blk-ctl.o
> > >>> +obj-$(CONFIG_SOC_IMX8M) += soc-imx8m.o blk-ctl.o
> blk-ctl-imx8mm.o
> > >>> diff --git a/drivers/soc/imx/blk-ctl-imx8mm.c
> > >>> b/drivers/soc/imx/blk-ctl-imx8mm.c
> > >>> new file mode 100644
> > >>> index 000000000000..59443588f892
> > >>> --- /dev/null
> > >>> +++ b/drivers/soc/imx/blk-ctl-imx8mm.c
> > >>> @@ -0,0 +1,139 @@
> > >>> +// SPDX-License-Identifier: GPL-2.0
> > >>> +/*
> > >>> + * Copyright 2021 NXP
> > >>> + */
> > >>> +
> > >>> +#include <dt-bindings/clock/imx8mm-clock.h>
> > >>> +#include <dt-bindings/power/imx8mm-power.h>
> > >>> +#include <linux/clk.h>
> > >>> +#include <linux/err.h>
> > >>> +#include <linux/io.h>
> > >>> +#include <linux/module.h>
> > >>> +#include <linux/mutex.h>
> > >>> +#include <linux/of_address.h>
> > >>> +#include <linux/of_device.h>
> > >>> +#include <linux/platform_device.h> #include <linux/slab.h>
> > >>> +#include <linux/types.h> #include <linux/pm_domain.h> #include
> > >>> +<linux/regmap.h>
> > >>> +
> > >>> +#include "blk-ctl.h"
> > >>> +
> > >>> +#define MEDIA_BLK_BUS_RSTN_BLK_SYNC_SFT_EN
> BIT(6)
> > >>> +#define MEDIA_BLK_MIPI_DSI_I_PRESETN_SFT_EN
> BIT(5)
> > >>> +#define MEDIA_BLK_MIPI_CSI_I_PRESETN_SFT_EN
> BIT(4)
> > >>> +#define MEDIA_BLK_CAMERA_PIXEL_RESET_N_SFT_EN
> BIT(3)
> > >>> +#define MEDIA_BLK_CSI_BRIDGE_SFT_EN
> GENMASK(2, 0)
> > >>> +
> > >>> +#define MEDIA_BLK_BUS_PD_MASK
> BIT(12)
> > >>> +#define MEDIA_BLK_MIPI_CSI_PD_MASK
> GENMASK(11, 10)
> > >>> +#define MEDIA_BLK_MIPI_DSI_PD_MASK
> GENMASK(9, 8)
> > >>> +#define MEDIA_BLK_LCDIF_PD_MASK
> GENMASK(7, 6)
> > >>> +#define MEDIA_BLK_CSI_BRIDGE_PD_MASK
> GENMASK(5, 0)
> > >>> +
> > >>> +static struct imx_blk_ctl_hw imx8mm_dispmix_blk_ctl_pds[] = {
> > >>> + IMX_BLK_CTL_PD("CSI_BRIDGE", NULL,
> IMX8MM_BLK_CTL_PD_DISPMIX_CSI_BRIDGE, 0x4,
> > >>> + MEDIA_BLK_CSI_BRIDGE_PD_MASK, 0,
> MEDIA_BLK_CSI_BRIDGE_SFT_EN,
> > >>> + IMX_BLK_CTL_PD_RESET),
> > >>> + IMX_BLK_CTL_PD("LCDIF", NULL,
> IMX8MM_BLK_CTL_PD_DISPMIX_LCDIF, 0x4,
> > >>> + MEDIA_BLK_LCDIF_PD_MASK, -1, -1, 0),
> > >>> + IMX_BLK_CTL_PD("MIPI_DSI", "mipi",
> IMX8MM_BLK_CTL_PD_DISPMIX_MIPI_DSI, 0x4,
> > >>> + MEDIA_BLK_MIPI_DSI_PD_MASK, 0,
> MEDIA_BLK_MIPI_DSI_I_PRESETN_SFT_EN,
> > >>> + IMX_BLK_CTL_PD_RESET),
> > >>> + IMX_BLK_CTL_PD("MIPI_CSI", "mipi",
> IMX8MM_BLK_CTL_PD_DISPMIX_MIPI_CSI, 0x4,
> > >>> + MEDIA_BLK_MIPI_CSI_PD_MASK, 0,
> > >>> +
> MEDIA_BLK_MIPI_CSI_I_PRESETN_SFT_EN |
> MEDIA_BLK_CAMERA_PIXEL_RESET_N_SFT_EN,
> > >>> + IMX_BLK_CTL_PD_RESET),
> > >>> + IMX_BLK_CTL_PD("DISPMIX_BUS", "dispmix",
> IMX8MM_BLK_CTL_PD_DISPMIX_BUS, 0x4,
> > >>> + MEDIA_BLK_BUS_PD_MASK, 0,
> MEDIA_BLK_BUS_RSTN_BLK_SYNC_SFT_EN,
> > >>> + IMX_BLK_CTL_PD_HANDSHAKE |
> > >>> +IMX_BLK_CTL_PD_RESET) };
> > >>> +
> > >>> +static struct imx_blk_ctl_hw imx8mm_vpumix_blk_ctl_pds[] = {
> > >>> + IMX_BLK_CTL_PD("VPU_BLK_CTL_G2", "vpu-g2",
> IMX8MM_BLK_CTL_PD_VPU_G2, 0x4,
> > >>> + BIT(0), 0, BIT(0),
> IMX_BLK_CTL_PD_RESET),
> > >>> + IMX_BLK_CTL_PD("VPU_BLK_CTL_G1", "vpu-g1",
> IMX8MM_BLK_CTL_PD_VPU_G1, 0x4,
> > >>> + BIT(1), 0, BIT(1),
> IMX_BLK_CTL_PD_RESET),
> > >>> + IMX_BLK_CTL_PD("VPU_BLK_CTL_H1", "vpu-h1",
> IMX8MM_BLK_CTL_PD_VPU_H1, 0x4,
> > >>> + BIT(2), 0, BIT(2),
> IMX_BLK_CTL_PD_RESET),
> > >>> + IMX_BLK_CTL_PD("VPU_BLK_CTL_BUS", "vpumix",
> IMX8MM_BLK_CTL_PD_VPU_BUS, 0x4,
> > >>> + BIT(2), 0, BIT(2),
> IMX_BLK_CTL_PD_HANDSHAKE
> > >>> +| IMX_BLK_CTL_PD_RESET) };
> > >>> +
> > >>> +static const struct regmap_config imx8mm_blk_ctl_regmap_config = {
> > >>> + .reg_bits = 32,
> > >>> + .reg_stride = 4,
> > >>> + .val_bits = 32,
> > >>> + .max_register = 0x30,
> > >>> + .fast_io = true,
> > >>> +};
> > >>> +
> > >>> +static const struct imx_blk_ctl_dev_data
> imx8mm_vpumix_blk_ctl_dev_data = {
> > >>> + .pds = imx8mm_vpumix_blk_ctl_pds,
> > >>> + .pds_num = ARRAY_SIZE(imx8mm_vpumix_blk_ctl_pds),
> > >>> + .max_num = IMX8MM_BLK_CTL_PD_VPU_MAX,
> > >>> + .hw_hsk = &imx8mm_vpumix_blk_ctl_pds[3],
> > >>> + .config = imx8mm_blk_ctl_regmap_config,
> > >>> + .name = "imx-vpumix-blk-ctl", };
> > >>> +
> > >>> +static const struct imx_blk_ctl_dev_data
> imx8mm_dispmix_blk_ctl_dev_data = {
> > >>> + .pds = imx8mm_dispmix_blk_ctl_pds,
> > >>> + .pds_num = ARRAY_SIZE(imx8mm_dispmix_blk_ctl_pds),
> > >>> + .max_num = IMX8MM_BLK_CTL_PD_DISPMIX_MAX,
> > >>> + .hw_hsk = &imx8mm_dispmix_blk_ctl_pds[4],
> > >>> + .config = imx8mm_blk_ctl_regmap_config,
> > >>> + .name = "imx-dispmix-blk-ctl", };
> > >>> +
> > >>> +static int imx8mm_blk_ctl_probe(struct platform_device *pdev) {
> > >>> + struct device *dev = &pdev->dev;
> > >>> + const struct imx_blk_ctl_dev_data *dev_data =
> of_device_get_match_data(dev);
> > >>> + struct regmap *regmap;
> > >>> + struct imx_blk_ctl *ctl;
> > >>> + void __iomem *base;
> > >>> +
> > >>> + ctl = devm_kzalloc(dev, sizeof(*ctl), GFP_KERNEL);
> > >>> + if (!ctl)
> > >>> + return -ENOMEM;
> > >>> +
> > >>> + base = devm_platform_ioremap_resource(pdev, 0);
> > >>> + if (IS_ERR(base))
> > >>> + return PTR_ERR(base);
> > >>> +
> > >>> + regmap = devm_regmap_init_mmio(dev, base,
> &dev_data->config);
> > >>> + if (IS_ERR(regmap))
> > >>> + return PTR_ERR(regmap);
> > >>> +
> > >>> + ctl->regmap = regmap;
> > >>> + ctl->dev = dev;
> > >>> + mutex_init(&ctl->lock);
> > >>> +
> > >>> + ctl->num_clks = devm_clk_bulk_get_all(dev, &ctl->clks);
> > >>> + if (ctl->num_clks < 0)
> > >>> + return ctl->num_clks;
> > >>> +
> > >>> + dev_set_drvdata(dev, ctl);
> > >>> + ctl->dev_data = dev_data;
> > >>> +
> > >>> + return imx_blk_ctl_register(dev); }
> > >>> +
> > >>> +static const struct of_device_id imx_blk_ctl_of_match[] = {
> > >>> + { .compatible = "fsl,imx8mm-vpumix-blk-ctl", .data =
> &imx8mm_vpumix_blk_ctl_dev_data },
> > >>> + { .compatible = "fsl,imx8mm-dispmix-blk-ctl", .data =
> &imx8mm_dispmix_blk_ctl_dev_data },
> > >>> + { /* Sentinel */ }
> > >>> +};
> > >>> +MODULE_DEVICE_TABLE(of, imx_blk_ctl_of_match);
> > >>> +
> > >>> +static struct platform_driver imx_blk_ctl_driver = {
> > >>> + .probe = imx8mm_blk_ctl_probe,
> > >>> + .driver = {
> > >>> + .name = "imx8mm-blk-ctl",
> > >>> + .of_match_table =
> of_match_ptr(imx_blk_ctl_of_match),
> > >>> + .pm = &imx_blk_ctl_pm_ops,
> > >>> + },
> > >>> +};
> > >>> +module_platform_driver(imx_blk_ctl_driver);
> > >>> --
> > >>> 2.30.0
> > >>>
Powered by blists - more mailing lists