| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAG3jFysYEG-wNvwExRXASzWqDeLW2sayCcLRW=6OU95WsokMQw@mail.gmail.com>
Date: Thu, 17 Jun 2021 09:21:33 +0200
From: Robert Foss <robert.foss@...aro.org>
To: Jonathan Marek <jonathan@...ek.ca>
Cc: MSM <linux-arm-msm@...r.kernel.org>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
"open list:COMMON CLK FRAMEWORK" <linux-clk@...r.kernel.org>,
open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v3 1/2] clk: qcom: add support for SM8350 DISPCC
Hey Jonathan,
On Tue, 8 Jun 2021 at 16:29, Jonathan Marek <jonathan@...ek.ca> wrote:
>
> Add support to the SM8350 display clock controller by extending the SM8250
> display clock controller, which is almost identical but has some minor
> differences.
>
> Signed-off-by: Jonathan Marek <jonathan@...ek.ca>
> ---
> v3:
> - added const to vco tables
> - moved clk rcgs/div list to global scope
> - patching clks on module init instead of probe
> - lowercase hex
> - update configure comment
> - rebased on added edp clocks
>
> drivers/clk/qcom/Kconfig | 4 +-
> drivers/clk/qcom/dispcc-sm8250.c | 103 ++++++++++++++++++++++++++-----
> 2 files changed, 90 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> index 45646b867cdb..cc60e6ee1654 100644
> --- a/drivers/clk/qcom/Kconfig
> +++ b/drivers/clk/qcom/Kconfig
> @@ -484,11 +484,11 @@ config SDX_GCC_55
> SPI, I2C, USB, SD/UFS, PCIe etc.
>
> config SM_DISPCC_8250
> - tristate "SM8150 and SM8250 Display Clock Controller"
> + tristate "SM8150/SM8250/SM8350 Display Clock Controller"
> depends on SM_GCC_8150 || SM_GCC_8250
> help
> Support for the display clock controller on Qualcomm Technologies, Inc
> - SM8150 and SM8250 devices.
> + SM8150/SM8250/SM8350 devices.
> Say Y if you want to support display devices and functionality such as
> splash screen.
>
> diff --git a/drivers/clk/qcom/dispcc-sm8250.c b/drivers/clk/qcom/dispcc-sm8250.c
> index 601c7c0ba483..86c474a51cd2 100644
> --- a/drivers/clk/qcom/dispcc-sm8250.c
> +++ b/drivers/clk/qcom/dispcc-sm8250.c
> @@ -34,10 +34,14 @@ enum {
> P_DSI1_PHY_PLL_OUT_DSICLK,
> };
>
> -static struct pll_vco vco_table[] = {
> +static const struct pll_vco vco_table[] = {
> { 249600000, 2000000000, 0 },
> };
>
> +static const struct pll_vco lucid_5lpe_vco[] = {
> + { 249600000, 1750000000, 0 },
> +};
> +
> static struct alpha_pll_config disp_cc_pll0_config = {
> .l = 0x47,
> .alpha = 0xE000,
> @@ -1222,6 +1226,7 @@ static const struct of_device_id disp_cc_sm8250_match_table[] = {
> { .compatible = "qcom,sc8180x-dispcc" },
> { .compatible = "qcom,sm8150-dispcc" },
> { .compatible = "qcom,sm8250-dispcc" },
> + { .compatible = "qcom,sm8350-dispcc" },
> { }
> };
> MODULE_DEVICE_TABLE(of, disp_cc_sm8250_match_table);
> @@ -1234,20 +1239,10 @@ static int disp_cc_sm8250_probe(struct platform_device *pdev)
> if (IS_ERR(regmap))
> return PTR_ERR(regmap);
>
> - /* note: trion == lucid, except for the prepare() op */
> - BUILD_BUG_ON(CLK_ALPHA_PLL_TYPE_TRION != CLK_ALPHA_PLL_TYPE_LUCID);
> - if (of_device_is_compatible(pdev->dev.of_node, "qcom,sc8180x-dispcc") ||
> - of_device_is_compatible(pdev->dev.of_node, "qcom,sm8150-dispcc")) {
> - disp_cc_pll0_config.config_ctl_hi_val = 0x00002267;
> - disp_cc_pll0_config.config_ctl_hi1_val = 0x00000024;
> - disp_cc_pll0_config.user_ctl_hi1_val = 0x000000D0;
> - disp_cc_pll0_init.ops = &clk_alpha_pll_trion_ops;
> - disp_cc_pll1_config.config_ctl_hi_val = 0x00002267;
> - disp_cc_pll1_config.config_ctl_hi1_val = 0x00000024;
> - disp_cc_pll1_config.user_ctl_hi1_val = 0x000000D0;
> - disp_cc_pll1_init.ops = &clk_alpha_pll_trion_ops;
> - }
> -
> + /* sm8350 note: downstream has a clk_lucid_5lpe_pll_configure, which
> + * does not write the PLL_UPDATE_BYPASS bit in PLL_MODE.
> + * It should not hurt sm8350 to have this extra write.
> + */
> clk_lucid_pll_configure(&disp_cc_pll0, regmap, &disp_cc_pll0_config);
> clk_lucid_pll_configure(&disp_cc_pll1, regmap, &disp_cc_pll1_config);
>
> @@ -1268,8 +1263,86 @@ static struct platform_driver disp_cc_sm8250_driver = {
> },
> };
>
> +static struct clk_rcg2 * const __initconst disp_cc_sm8250_rcgs[] = {
> + &disp_cc_mdss_byte0_clk_src,
> + &disp_cc_mdss_byte1_clk_src,
> + &disp_cc_mdss_dp_aux1_clk_src,
> + &disp_cc_mdss_dp_aux_clk_src,
> + &disp_cc_mdss_dp_link1_clk_src,
> + &disp_cc_mdss_dp_link_clk_src,
> + &disp_cc_mdss_dp_pixel1_clk_src,
> + &disp_cc_mdss_dp_pixel2_clk_src,
> + &disp_cc_mdss_dp_pixel_clk_src,
> + &disp_cc_mdss_edp_aux_clk_src,
> + &disp_cc_mdss_edp_gtc_clk_src,
> + &disp_cc_mdss_edp_link_clk_src,
> + &disp_cc_mdss_edp_pixel_clk_src,
> + &disp_cc_mdss_esc0_clk_src,
> + &disp_cc_mdss_mdp_clk_src,
> + &disp_cc_mdss_pclk0_clk_src,
> + &disp_cc_mdss_pclk1_clk_src,
> + &disp_cc_mdss_rot_clk_src,
> + &disp_cc_mdss_vsync_clk_src,
> + &disp_cc_mdss_ahb_clk_src,
> +};
> +
> +static struct clk_regmap_div * const __initconst disp_cc_sm8250_divs[] = {
> + &disp_cc_mdss_byte0_div_clk_src,
> + &disp_cc_mdss_byte1_div_clk_src,
> + &disp_cc_mdss_dp_link1_div_clk_src,
> + &disp_cc_mdss_dp_link_div_clk_src,
> +};
> +
> +static bool __init disp_cc_is_compatible(const char *compatible)
> +{
> + struct device_node *node = of_find_compatible_node(NULL, NULL, compatible);
> +
> + of_node_put(node);
> + return node != NULL;
> +}
checkpatch --struct is unhappy with the above comparison. I think it
can be removed.
> +
> static int __init disp_cc_sm8250_init(void)
> {
> + if (disp_cc_is_compatible("qcom,sm8150-dispcc") ||
> + disp_cc_is_compatible("qcom,sc8180x-dispcc")) {
> + BUILD_BUG_ON(CLK_ALPHA_PLL_TYPE_TRION != CLK_ALPHA_PLL_TYPE_LUCID);
> + disp_cc_pll0_config.config_ctl_hi_val = 0x00002267;
> + disp_cc_pll0_config.config_ctl_hi1_val = 0x00000024;
> + disp_cc_pll0_config.user_ctl_hi1_val = 0x000000d0;
> + disp_cc_pll0_init.ops = &clk_alpha_pll_trion_ops;
> + disp_cc_pll1_config.config_ctl_hi_val = 0x00002267;
> + disp_cc_pll1_config.config_ctl_hi1_val = 0x00000024;
> + disp_cc_pll1_config.user_ctl_hi1_val = 0x000000d0;
> + disp_cc_pll1_init.ops = &clk_alpha_pll_trion_ops;
> + } else if (disp_cc_is_compatible("qcom,sm8350-dispcc")) {
> + unsigned int i;
> +
> + for (i = 0; i < ARRAY_SIZE(disp_cc_sm8250_rcgs); i++)
> + disp_cc_sm8250_rcgs[i]->cmd_rcgr -= 4;
> +
> + for (i = 0; i < ARRAY_SIZE(disp_cc_sm8250_divs); i++) {
> + disp_cc_sm8250_divs[i]->reg -= 4;
> + disp_cc_sm8250_divs[i]->width = 4;
> + }
> +
> + disp_cc_mdss_ahb_clk.halt_reg -= 4;
> + disp_cc_mdss_ahb_clk.clkr.enable_reg -= 4;
> +
> + disp_cc_mdss_ahb_clk_src.cmd_rcgr = 0x22a0;
> +
> + disp_cc_pll0_config.config_ctl_hi1_val = 0x2a9a699c;
> + disp_cc_pll0_config.test_ctl_hi1_val = 0x01800000;
> + disp_cc_pll0_init.ops = &clk_alpha_pll_lucid_5lpe_ops;
> + disp_cc_pll0.vco_table = lucid_5lpe_vco;
> + disp_cc_pll1_config.config_ctl_hi1_val = 0x2a9a699c;
> + disp_cc_pll1_config.test_ctl_hi1_val = 0x01800000;
> + disp_cc_pll1_init.ops = &clk_alpha_pll_lucid_5lpe_ops;
> + disp_cc_pll1.vco_table = lucid_5lpe_vco;
> +
> + disp_cc_sm8250_clocks[DISP_CC_MDSS_EDP_GTC_CLK] = NULL;
> + disp_cc_sm8250_clocks[DISP_CC_MDSS_EDP_GTC_CLK_SRC] = NULL;
> + }
> +
> return platform_driver_register(&disp_cc_sm8250_driver);
> }
> subsys_initcall(disp_cc_sm8250_init);
With the above issue addressed, lgtm.
Reviewed-by: Robert Foss <robert.foss@...aro.org>
Powered by blists - more mailing lists