Message-ID: <20210618101317.55fr5vl5akmtgcf6@pengutronix.de>
Date:   Fri, 18 Jun 2021 12:13:17 +0200
From:   Oleksij Rempel <o.rempel@...gutronix.de>
To:     Marek Szyprowski <m.szyprowski@...sung.com>
Cc:     "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>, Andrew Lunn <andrew@...n.ch>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Russell King <linux@...linux.org.uk>, kernel@...gutronix.de,
        linux-kernel@...r.kernel.org, linux-usb@...r.kernel.org,
        netdev@...r.kernel.org
Subject: Re: [PATCH net-next v2 4/8] net: usb: asix: ax88772: add phylib
 support

Hi Marek,

thank you for your feedback.

On Fri, Jun 18, 2021 at 10:39:12AM +0200, Marek Szyprowski wrote:
> Hi Oleksij,
> 
> On 07.06.2021 10:27, Oleksij Rempel wrote:
> > To be able to use ax88772 with external PHYs and use advantage of
> > existing PHY drivers, we need to port at least ax88772 part of asix
> > driver to the phylib framework.
> >
> > Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
> 
> I found one more issue with this patch. On one of my test boards 
> (Samsung Exynos5250 SoC based Arndale) system fails to establish network 
> connection just after starting the kernel when the driver is build-in.
> 
> --->8---
> # dmesg | grep asix
> [    2.761928] usbcore: registered new interface driver asix
> [    5.003110] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): 
> invalid hw address, using random
> [    6.065400] asix 1-3.2.4:1.0 eth0: register 'asix' at 
> usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 7a:9b:9a:f2:94:8e
> [   14.043868] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow 
> control off
> # ping -c2  host
> PING host (192.168.100.1) 56(84) bytes of data.
>  From 192.168.100.20 icmp_seq=1 Destination Host Unreachable
>  From 192.168.100.20 icmp_seq=2 Destination Host Unreachable
> 
> --- host ping statistics ---
> 2 packets transmitted, 0 received, +2 errors, 100% packet loss, time 59ms
> --->8---

Hm... it looks like different chip variant. My is registered as
"ASIX AX88772B USB", yours is "ASIX AX88772 USB 2.0" - "B" is the
difference. Can you please tell me more about this adapter and if possible open
tell the real part name.

I can imagine that this adapter may using generic PHY driver.
Can you please confirm it by dmesg | grep PHY?
In my case i'll get:
Asix Electronics AX88772C usb-001:003:10: attached PHY driver (mii_bus:phy_addr=usb-001:003:10, irq=POLL)

If you have a different PHY, can you please send me the PHY id:
cat /sys/bus/mdio_bus/devices/usb-001\:003\:10/phy_id

Your usb path will probably be different.

> Calling ifup eth0 && ifdown eth0 fixes the network status:
> 
> --->8---
> # ifdown eth0 && ifup eth0
> [   60.474929] asix 1-3.2.4:1.0 eth0: Link is Down
> [   60.623516] asix 1-3.2.4:1.0 eth0: Link is Down
> [   62.774304] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> [   62.786354] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow 
> control off
> # ping -c2 host
> PING host (192.168.100.1) 56(84) bytes of data.
> 64 bytes from host (192.168.100.1): icmp_seq=1 ttl=64 time=1.25 ms
> 64 bytes from host (192.168.100.1): icmp_seq=2 ttl=64 time=0.853 ms
> 
> --- host ping statistics ---
> 2 packets transmitted, 2 received, 0% packet loss, time 3ms
> rtt min/avg/max/mdev = 0.853/1.053/1.254/0.203 ms
> --->8---
> 
> When driver is loaded as a module (and without any other modules, so 
> this is not a dependency issue), the connection is established properly 
> just after the boot:
> 
> --->8---
> # dmesg | grep asix
> [   13.633284] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): 
> invalid hw address, using random
> [   15.390350] asix 1-3.2.4:1.0 eth0: register 'asix' at 
> usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 3a:51:11:08:aa:ea
> [   15.414052] usbcore: registered new interface driver asix
> [   15.832564] asix 1-3.2.4:1.0 eth0: Link is Down
> [   18.053747] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow 
> control off
> # ping -c2 host
> PING host (192.168.100.1) 56(84) bytes of data.
> 64 bytes from host (192.168.100.1): icmp_seq=1 ttl=64 time=0.545 ms
> 64 bytes from host (192.168.100.1): icmp_seq=2 ttl=64 time=0.742 ms
> 
> --- host ping statistics ---
> 2 packets transmitted, 2 received, 0% packet loss, time 3ms
> rtt min/avg/max/mdev = 0.545/0.643/0.742/0.101 ms
> 
> --->8---
> 
> Let me know if I can make any other tests that would help fixing this issue.
> 
> > ---
> >   drivers/net/usb/asix.h         |   9 +++
> >   drivers/net/usb/asix_common.c  |  37 ++++++++++
> >   drivers/net/usb/asix_devices.c | 120 +++++++++++++++++++++------------
> >   drivers/net/usb/ax88172a.c     |  14 ----
> >   4 files changed, 122 insertions(+), 58 deletions(-)
> >
> > diff --git a/drivers/net/usb/asix.h b/drivers/net/usb/asix.h
> > index edb94efd265e..2122d302e643 100644
> > --- a/drivers/net/usb/asix.h
> > +++ b/drivers/net/usb/asix.h
> > @@ -25,6 +25,7 @@
> >   #include <linux/usb/usbnet.h>
> >   #include <linux/slab.h>
> >   #include <linux/if_vlan.h>
> > +#include <linux/phy.h>
> >   
> >   #define DRIVER_VERSION "22-Dec-2011"
> >   #define DRIVER_NAME "asix"
> > @@ -178,6 +179,10 @@ struct asix_common_private {
> >   	u16 presvd_phy_advertise;
> >   	u16 presvd_phy_bmcr;
> >   	struct asix_rx_fixup_info rx_fixup_info;
> > +	struct mii_bus *mdio;
> > +	struct phy_device *phydev;
> > +	u16 phy_addr;
> > +	char phy_name[20];
> >   };
> >   
> >   extern const struct driver_info ax88172a_info;
> > @@ -214,6 +219,7 @@ int asix_write_rx_ctl(struct usbnet *dev, u16 mode, int in_pm);
> >   
> >   u16 asix_read_medium_status(struct usbnet *dev, int in_pm);
> >   int asix_write_medium_mode(struct usbnet *dev, u16 mode, int in_pm);
> > +void asix_adjust_link(struct net_device *netdev);
> >   
> >   int asix_write_gpio(struct usbnet *dev, u16 value, int sleep, int in_pm);
> >   
> > @@ -222,6 +228,9 @@ void asix_set_multicast(struct net_device *net);
> >   int asix_mdio_read(struct net_device *netdev, int phy_id, int loc);
> >   void asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val);
> >   
> > +int asix_mdio_bus_read(struct mii_bus *bus, int phy_id, int regnum);
> > +int asix_mdio_bus_write(struct mii_bus *bus, int phy_id, int regnum, u16 val);
> > +
> >   int asix_mdio_read_nopm(struct net_device *netdev, int phy_id, int loc);
> >   void asix_mdio_write_nopm(struct net_device *netdev, int phy_id, int loc,
> >   			  int val);
> > diff --git a/drivers/net/usb/asix_common.c b/drivers/net/usb/asix_common.c
> > index e1109f1a8dd5..085bc8281082 100644
> > --- a/drivers/net/usb/asix_common.c
> > +++ b/drivers/net/usb/asix_common.c
> > @@ -384,6 +384,27 @@ int asix_write_medium_mode(struct usbnet *dev, u16 mode, int in_pm)
> >   	return ret;
> >   }
> >   
> > +/* set MAC link settings according to information from phylib */
> > +void asix_adjust_link(struct net_device *netdev)
> > +{
> > +	struct phy_device *phydev = netdev->phydev;
> > +	struct usbnet *dev = netdev_priv(netdev);
> > +	u16 mode = 0;
> > +
> > +	if (phydev->link) {
> > +		mode = AX88772_MEDIUM_DEFAULT;
> > +
> > +		if (phydev->duplex == DUPLEX_HALF)
> > +			mode &= ~AX_MEDIUM_FD;
> > +
> > +		if (phydev->speed != SPEED_100)
> > +			mode &= ~AX_MEDIUM_PS;
> > +	}
> > +
> > +	asix_write_medium_mode(dev, mode, 0);
> > +	phy_print_status(phydev);
> > +}
> > +
> >   int asix_write_gpio(struct usbnet *dev, u16 value, int sleep, int in_pm)
> >   {
> >   	int ret;
> > @@ -506,6 +527,22 @@ void asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val)
> >   	mutex_unlock(&dev->phy_mutex);
> >   }
> >   
> > +/* MDIO read and write wrappers for phylib */
> > +int asix_mdio_bus_read(struct mii_bus *bus, int phy_id, int regnum)
> > +{
> > +	struct usbnet *priv = bus->priv;
> > +
> > +	return asix_mdio_read(priv->net, phy_id, regnum);
> > +}
> > +
> > +int asix_mdio_bus_write(struct mii_bus *bus, int phy_id, int regnum, u16 val)
> > +{
> > +	struct usbnet *priv = bus->priv;
> > +
> > +	asix_mdio_write(priv->net, phy_id, regnum, val);
> > +	return 0;
> > +}
> > +
> >   int asix_mdio_read_nopm(struct net_device *netdev, int phy_id, int loc)
> >   {
> >   	struct usbnet *dev = netdev_priv(netdev);
> > diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
> > index 00b6ac0570eb..e4cd85e38edd 100644
> > --- a/drivers/net/usb/asix_devices.c
> > +++ b/drivers/net/usb/asix_devices.c
> > @@ -285,7 +285,7 @@ static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
> >   
> >   static const struct ethtool_ops ax88772_ethtool_ops = {
> >   	.get_drvinfo		= asix_get_drvinfo,
> > -	.get_link		= asix_get_link,
> > +	.get_link		= usbnet_get_link,
> >   	.get_msglevel		= usbnet_get_msglevel,
> >   	.set_msglevel		= usbnet_set_msglevel,
> >   	.get_wol		= asix_get_wol,
> > @@ -293,37 +293,15 @@ static const struct ethtool_ops ax88772_ethtool_ops = {
> >   	.get_eeprom_len		= asix_get_eeprom_len,
> >   	.get_eeprom		= asix_get_eeprom,
> >   	.set_eeprom		= asix_set_eeprom,
> > -	.nway_reset		= usbnet_nway_reset,
> > -	.get_link_ksettings	= usbnet_get_link_ksettings_mii,
> > -	.set_link_ksettings	= usbnet_set_link_ksettings_mii,
> > +	.nway_reset		= phy_ethtool_nway_reset,
> > +	.get_link_ksettings	= phy_ethtool_get_link_ksettings,
> > +	.set_link_ksettings	= phy_ethtool_set_link_ksettings,
> >   };
> >   
> > -static int ax88772_link_reset(struct usbnet *dev)
> > -{
> > -	u16 mode;
> > -	struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
> > -
> > -	mii_check_media(&dev->mii, 1, 1);
> > -	mii_ethtool_gset(&dev->mii, &ecmd);
> > -	mode = AX88772_MEDIUM_DEFAULT;
> > -
> > -	if (ethtool_cmd_speed(&ecmd) != SPEED_100)
> > -		mode &= ~AX_MEDIUM_PS;
> > -
> > -	if (ecmd.duplex != DUPLEX_FULL)
> > -		mode &= ~AX_MEDIUM_FD;
> > -
> > -	netdev_dbg(dev->net, "ax88772_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
> > -		   ethtool_cmd_speed(&ecmd), ecmd.duplex, mode);
> > -
> > -	asix_write_medium_mode(dev, mode, 0);
> > -
> > -	return 0;
> > -}
> > -
> >   static int ax88772_reset(struct usbnet *dev)
> >   {
> >   	struct asix_data *data = (struct asix_data *)&dev->data;
> > +	struct asix_common_private *priv = dev->driver_priv;
> >   	int ret;
> >   
> >   	/* Rewrite MAC address */
> > @@ -342,6 +320,8 @@ static int ax88772_reset(struct usbnet *dev)
> >   	if (ret < 0)
> >   		goto out;
> >   
> > +	phy_start(priv->phydev);
> > +
> >   	return 0;
> >   
> >   out:
> > @@ -586,7 +566,7 @@ static const struct net_device_ops ax88772_netdev_ops = {
> >   	.ndo_get_stats64	= dev_get_tstats64,
> >   	.ndo_set_mac_address 	= asix_set_mac_address,
> >   	.ndo_validate_addr	= eth_validate_addr,
> > -	.ndo_do_ioctl		= asix_ioctl,
> > +	.ndo_do_ioctl		= phy_do_ioctl_running,
> >   	.ndo_set_rx_mode        = asix_set_multicast,
> >   };
> >   
> > @@ -677,12 +657,57 @@ static int asix_resume(struct usb_interface *intf)
> >   	return usbnet_resume(intf);
> >   }
> >   
> > +static int ax88772_init_mdio(struct usbnet *dev)
> > +{
> > +	struct asix_common_private *priv = dev->driver_priv;
> > +
> > +	priv->mdio = devm_mdiobus_alloc(&dev->udev->dev);
> > +	if (!priv->mdio)
> > +		return -ENOMEM;
> > +
> > +	priv->mdio->priv = dev;
> > +	priv->mdio->read = &asix_mdio_bus_read;
> > +	priv->mdio->write = &asix_mdio_bus_write;
> > +	priv->mdio->name = "Asix MDIO Bus";
> > +	/* mii bus name is usb-<usb bus number>-<usb device number> */
> > +	snprintf(priv->mdio->id, MII_BUS_ID_SIZE, "usb-%03d:%03d",
> > +		 dev->udev->bus->busnum, dev->udev->devnum);
> > +
> > +	return devm_mdiobus_register(&dev->udev->dev, priv->mdio);
> > +}
> > +
> > +static int ax88772_init_phy(struct usbnet *dev)
> > +{
> > +	struct asix_common_private *priv = dev->driver_priv;
> > +	int ret;
> > +
> > +	priv->phy_addr = asix_read_phy_addr(dev, true);
> > +	if (priv->phy_addr < 0)
> > +		return priv->phy_addr;
> > +
> > +	snprintf(priv->phy_name, sizeof(priv->phy_name), PHY_ID_FMT,
> > +		 priv->mdio->id, priv->phy_addr);
> > +
> > +	priv->phydev = phy_connect(dev->net, priv->phy_name, &asix_adjust_link,
> > +				   PHY_INTERFACE_MODE_INTERNAL);
> > +	if (IS_ERR(priv->phydev)) {
> > +		netdev_err(dev->net, "Could not connect to PHY device %s\n",
> > +			   priv->phy_name);
> > +		ret = PTR_ERR(priv->phydev);
> > +		return ret;
> > +	}
> > +
> > +	phy_attached_info(priv->phydev);
> > +
> > +	return 0;
> > +}
> > +
> >   static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
> >   {
> > -	int ret, i;
> >   	u8 buf[ETH_ALEN] = {0}, chipcode = 0;
> > -	u32 phyid;
> >   	struct asix_common_private *priv;
> > +	int ret, i;
> > +	u32 phyid;
> >   
> >   	usbnet_get_endpoints(dev, intf);
> >   
> > @@ -714,17 +739,6 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
> >   
> >   	asix_set_netdev_dev_addr(dev, buf);
> >   
> > -	/* Initialize MII structure */
> > -	dev->mii.dev = dev->net;
> > -	dev->mii.mdio_read = asix_mdio_read;
> > -	dev->mii.mdio_write = asix_mdio_write;
> > -	dev->mii.phy_id_mask = 0x1f;
> > -	dev->mii.reg_num_mask = 0x1f;
> > -
> > -	dev->mii.phy_id = asix_read_phy_addr(dev, true);
> > -	if (dev->mii.phy_id < 0)
> > -		return dev->mii.phy_id;
> > -
> >   	dev->net->netdev_ops = &ax88772_netdev_ops;
> >   	dev->net->ethtool_ops = &ax88772_ethtool_ops;
> >   	dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */
> > @@ -768,11 +782,31 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
> >   		priv->suspend = ax88772_suspend;
> >   	}
> >   
> > +	ret = ax88772_init_mdio(dev);
> > +	if (ret)
> > +		return ret;
> > +
> > +	return ax88772_init_phy(dev);
> > +}
> > +
> > +static int ax88772_stop(struct usbnet *dev)
> > +{
> > +	struct asix_common_private *priv = dev->driver_priv;
> > +
> > +	/* On unplugged USB, we will get MDIO communication errors and the
> > +	 * PHY will be set in to PHY_HALTED state.
> > +	 */
> > +	if (priv->phydev->state != PHY_HALTED)
> > +		phy_stop(priv->phydev);
> > +
> >   	return 0;
> >   }
> >   
> >   static void ax88772_unbind(struct usbnet *dev, struct usb_interface *intf)
> >   {
> > +	struct asix_common_private *priv = dev->driver_priv;
> > +
> > +	phy_disconnect(priv->phydev);
> >   	asix_rx_fixup_common_free(dev->driver_priv);
> >   }
> >   
> > @@ -1161,8 +1195,8 @@ static const struct driver_info ax88772_info = {
> >   	.bind = ax88772_bind,
> >   	.unbind = ax88772_unbind,
> >   	.status = asix_status,
> > -	.link_reset = ax88772_link_reset,
> >   	.reset = ax88772_reset,
> > +	.stop = ax88772_stop,
> >   	.flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR | FLAG_MULTI_PACKET,
> >   	.rx_fixup = asix_rx_fixup_common,
> >   	.tx_fixup = asix_tx_fixup,
> > @@ -1173,7 +1207,6 @@ static const struct driver_info ax88772b_info = {
> >   	.bind = ax88772_bind,
> >   	.unbind = ax88772_unbind,
> >   	.status = asix_status,
> > -	.link_reset = ax88772_link_reset,
> >   	.reset = ax88772_reset,
> >   	.flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |
> >   	         FLAG_MULTI_PACKET,
> > @@ -1209,7 +1242,6 @@ static const struct driver_info hg20f9_info = {
> >   	.bind = ax88772_bind,
> >   	.unbind = ax88772_unbind,
> >   	.status = asix_status,
> > -	.link_reset = ax88772_link_reset,
> >   	.reset = ax88772_reset,
> >   	.flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |
> >   	         FLAG_MULTI_PACKET,
> > diff --git a/drivers/net/usb/ax88172a.c b/drivers/net/usb/ax88172a.c
> > index c8ca5187eece..2e2081346740 100644
> > --- a/drivers/net/usb/ax88172a.c
> > +++ b/drivers/net/usb/ax88172a.c
> > @@ -25,20 +25,6 @@ struct ax88172a_private {
> >   	struct asix_rx_fixup_info rx_fixup_info;
> >   };
> >   
> > -/* MDIO read and write wrappers for phylib */
> > -static int asix_mdio_bus_read(struct mii_bus *bus, int phy_id, int regnum)
> > -{
> > -	return asix_mdio_read(((struct usbnet *)bus->priv)->net, phy_id,
> > -			      regnum);
> > -}
> > -
> > -static int asix_mdio_bus_write(struct mii_bus *bus, int phy_id, int regnum,
> > -			       u16 val)
> > -{
> > -	asix_mdio_write(((struct usbnet *)bus->priv)->net, phy_id, regnum, val);
> > -	return 0;
> > -}
> > -
> >   /* set MAC link settings according to information from phylib */
> >   static void ax88172a_adjust_link(struct net_device *netdev)
> >   {
> 
> Best regards
> -- 
> Marek Szyprowski, PhD
> Samsung R&D Institute Poland
> 
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

Powered by blists - more mailing lists