Message-Id: <20210618123851.1344518-8-anup.patel@wdc.com>
Date:   Fri, 18 Jun 2021 18:08:47 +0530
From:   Anup Patel <anup.patel@....com>
To:     Palmer Dabbelt <palmer@...belt.com>,
        Palmer Dabbelt <palmerdabbelt@...gle.com>,
        Paul Walmsley <paul.walmsley@...ive.com>,
        Thomas Gleixner <tglx@...utronix.de>,
        Marc Zyngier <maz@...nel.org>,
        Daniel Lezcano <daniel.lezcano@...aro.org>,
        Rob Herring <robh+dt@...nel.org>
Cc:     Atish Patra <atish.patra@....com>,
        Alistair Francis <Alistair.Francis@....com>,
        Anup Patel <anup@...infault.org>,
        linux-riscv@...ts.infradead.org, linux-kernel@...r.kernel.org,
        devicetree@...r.kernel.org, Anup Patel <anup.patel@....com>
Subject: [RFC PATCH v2 07/11] irqchip: Add ACLINT software interrupt driver

The RISC-V ACLINT provides MSWI and SSWI devices for M-mode and
S-mode software interrupts respectively. We add irqchip driver
which provide IPI operations based on ACLINT [M|S]SWI devices
to the Linux RISC-V kernel.

Signed-off-by: Anup Patel <anup.patel@....com>
---
 drivers/irqchip/Kconfig          |  11 ++
 drivers/irqchip/Makefile         |   1 +
 drivers/irqchip/irq-aclint-swi.c | 271 +++++++++++++++++++++++++++++++
 3 files changed, 283 insertions(+)
 create mode 100644 drivers/irqchip/irq-aclint-swi.c

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 62543a4eccc0..2010d493b03b 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -508,6 +508,17 @@ config RISCV_INTC
 
 	   If you don't know what to do here, say Y.
 
+config RISCV_ACLINT_SWI
+	bool "RISC-V Advanced Core Local Interruptor Software Interrupts"
+	depends on RISCV
+	help
+	   This enables support for software interrupts using the Advanced
+	   Core Local Interruptor (ACLINT) found in RISC-V systems.  The
+	   RISC-V ACLINT provides devices for inter-process interrupt and
+	   timer functionality.
+
+	   If you don't know what to do here, say Y.
+
 config SIFIVE_PLIC
 	bool "SiFive Platform-Level Interrupt Controller"
 	depends on RISCV
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index f88cbf36a9d2..a6edf6733c1d 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -97,6 +97,7 @@ obj-$(CONFIG_QCOM_PDC)			+= qcom-pdc.o
 obj-$(CONFIG_CSKY_MPINTC)		+= irq-csky-mpintc.o
 obj-$(CONFIG_CSKY_APB_INTC)		+= irq-csky-apb-intc.o
 obj-$(CONFIG_RISCV_INTC)		+= irq-riscv-intc.o
+obj-$(CONFIG_RISCV_ACLINT_SWI)		+= irq-aclint-swi.o
 obj-$(CONFIG_SIFIVE_PLIC)		+= irq-sifive-plic.o
 obj-$(CONFIG_IMX_IRQSTEER)		+= irq-imx-irqsteer.o
 obj-$(CONFIG_IMX_INTMUX)		+= irq-imx-intmux.o
diff --git a/drivers/irqchip/irq-aclint-swi.c b/drivers/irqchip/irq-aclint-swi.c
new file mode 100644
index 000000000000..a31a7fc504d1
--- /dev/null
+++ b/drivers/irqchip/irq-aclint-swi.c
@@ -0,0 +1,271 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Western Digital Corporation or its affiliates.
+ */
+
+#define pr_fmt(fmt) "aclint-swi: " fmt
+#include <linux/cpu.h>
+#include <linux/cpumask.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/smp.h>
+
+struct aclint_swi {
+	void __iomem *sip_reg;
+	unsigned long bits;
+};
+
+static int aclint_swi_parent_irq __ro_after_init;
+static struct irq_domain *aclint_swi_domain __ro_after_init;
+static DEFINE_PER_CPU(struct aclint_swi, aclint_swis);
+
+static void aclint_swi_dummy_mask_unmask(struct irq_data *d)
+{
+}
+
+static void aclint_swi_send_mask(struct irq_data *d,
+				  const struct cpumask *mask)
+{
+	int cpu;
+	struct aclint_swi *swi;
+
+	/* Barrier before doing atomic bit update to IPI bits */
+	smp_mb__before_atomic();
+
+	for_each_cpu(cpu, mask) {
+		swi = per_cpu_ptr(&aclint_swis, cpu);
+		set_bit(d->hwirq, &swi->bits);
+		writel(1, swi->sip_reg);
+	}
+
+	/* Barrier after doing atomic bit update to IPI bits */
+	smp_mb__after_atomic();
+}
+
+static struct irq_chip aclint_swi_chip = {
+	.name = "RISC-V ACLINT SWI",
+	.irq_mask	= aclint_swi_dummy_mask_unmask,
+	.irq_unmask	= aclint_swi_dummy_mask_unmask,
+	.ipi_send_mask	= aclint_swi_send_mask,
+};
+
+static int aclint_swi_domain_map(struct irq_domain *d, unsigned int irq,
+				 irq_hw_number_t hwirq)
+{
+	irq_set_percpu_devid(irq);
+	irq_domain_set_info(d, irq, hwirq, &aclint_swi_chip, d->host_data,
+			    handle_percpu_devid_irq, NULL, NULL);
+
+	return 0;
+}
+
+static int aclint_swi_domain_alloc(struct irq_domain *d, unsigned int virq,
+				   unsigned int nr_irqs, void *arg)
+{
+	int i, ret;
+	irq_hw_number_t hwirq;
+	unsigned int type = IRQ_TYPE_NONE;
+	struct irq_fwspec *fwspec = arg;
+
+	ret = irq_domain_translate_onecell(d, fwspec, &hwirq, &type);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < nr_irqs; i++) {
+		ret = aclint_swi_domain_map(d, virq + i, hwirq + i);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static const struct irq_domain_ops aclint_swi_domain_ops = {
+	.translate	= irq_domain_translate_onecell,
+	.alloc		= aclint_swi_domain_alloc,
+	.free		= irq_domain_free_irqs_top,
+};
+
+static void aclint_swi_handle_irq(struct irq_desc *desc)
+{
+	int irq;
+	unsigned long irqs;
+	irq_hw_number_t hwirq;
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	struct aclint_swi *swi = this_cpu_ptr(&aclint_swis);
+
+	chained_irq_enter(chip, desc);
+
+	writel(0, swi->sip_reg);
+
+	while (true) {
+		/* Order bit clearing and data access. */
+		mb();
+
+		irqs = xchg(&swi->bits, 0);
+		if (!irqs)
+			goto done;
+
+		for (hwirq = 0; hwirq < BITS_PER_LONG; hwirq++) {
+			if (!(BIT(hwirq) & irqs))
+				continue;
+
+			irq = irq_find_mapping(aclint_swi_domain, hwirq);
+			if (unlikely(irq <= 0))
+				pr_warn_ratelimited(
+					"can't find mapping for hwirq %lu\n",
+					hwirq);
+			else
+				generic_handle_irq(irq);
+		}
+	}
+
+done:
+	chained_irq_exit(chip, desc);
+}
+
+static int aclint_swi_dying_cpu(unsigned int cpu)
+{
+	disable_percpu_irq(aclint_swi_parent_irq);
+	return 0;
+}
+
+static int aclint_swi_starting_cpu(unsigned int cpu)
+{
+	enable_percpu_irq(aclint_swi_parent_irq,
+			  irq_get_trigger_type(aclint_swi_parent_irq));
+	return 0;
+}
+
+static int __init aclint_swi_set_virq(void)
+{
+	int virq;
+	struct irq_fwspec ipi = {
+		.fwnode		= aclint_swi_domain->fwnode,
+		.param_count	= 1,
+		.param[0]	= 0,
+	};
+
+	virq = __irq_domain_alloc_irqs(aclint_swi_domain, -1, BITS_PER_LONG,
+				       NUMA_NO_NODE, &ipi,
+				       false, NULL);
+	if (virq <= 0) {
+		pr_err("unable to alloc IRQs from SBI IPI IRQ domain\n");
+		return -ENOMEM;
+	}
+
+	riscv_ipi_set_virq_range(virq, BITS_PER_LONG, true);
+
+	return 0;
+}
+
+static int __init aclint_swi_domain_init(struct device_node *node)
+{
+	/*
+	 * We can have multiple ACLINT SWI devices but we only need
+	 * one IRQ domain for providing per-HART (or per-CPU) IPIs.
+	 */
+	if (aclint_swi_domain)
+		return 0;
+
+	aclint_swi_domain = irq_domain_add_linear(node, BITS_PER_LONG,
+						&aclint_swi_domain_ops, NULL);
+	if (!aclint_swi_domain) {
+		pr_err("unable to add ACLINT SWI IRQ domain\n");
+		return -ENOMEM;
+	}
+
+	return aclint_swi_set_virq();
+}
+
+static int __init aclint_swi_init(struct device_node *node,
+				  struct device_node *parent)
+{
+	int rc;
+	void __iomem *base;
+	struct aclint_swi *swi;
+	u32 i, nr_irqs, nr_cpus = 0;
+
+	/* Map the registers */
+	base = of_iomap(node, 0);
+	if (!base) {
+		pr_err("%pOFP: could not map registers\n", node);
+		return -ENODEV;
+	}
+
+	/* Iterarte over each target CPU connected with this ACLINT */
+	nr_irqs = of_irq_count(node);
+	for (i = 0; i < nr_irqs; i++) {
+		struct of_phandle_args parent;
+		int cpu, hartid;
+
+		if (of_irq_parse_one(node, i, &parent)) {
+			pr_err("%pOFP: failed to parse irq %d.\n",
+			       node, i);
+			continue;
+		}
+
+		if (parent.args[0] != RV_IRQ_SOFT) {
+			pr_err("%pOFP: invalid irq %d (hwirq %d)\n",
+			       node, i, parent.args[0]);
+			continue;
+		}
+
+		hartid = riscv_of_parent_hartid(parent.np);
+		if (hartid < 0) {
+			pr_warn("failed to parse hart ID for irq %d.\n", i);
+			continue;
+		}
+
+		cpu = riscv_hartid_to_cpuid(hartid);
+		if (cpu < 0) {
+			pr_warn("Invalid cpuid for irq %d\n", i);
+			continue;
+		}
+
+		/* Find parent domain and register chained handler */
+		if (!aclint_swi_parent_irq && irq_find_host(parent.np)) {
+			aclint_swi_parent_irq = irq_of_parse_and_map(node, i);
+			if (aclint_swi_parent_irq) {
+				irq_set_chained_handler(aclint_swi_parent_irq,
+							aclint_swi_handle_irq);
+				cpuhp_setup_state(CPUHP_AP_ONLINE_DYN,
+					"irqchip/riscv/aclint-swi:starting",
+					aclint_swi_starting_cpu,
+					aclint_swi_dying_cpu);
+			}
+		}
+
+		swi = per_cpu_ptr(&aclint_swis, cpu);
+		swi->sip_reg = base + i * sizeof(u32);
+		writel(0, swi->sip_reg);
+
+		nr_cpus++;
+	}
+
+	/* Create the IPI domain for ACLINT SWI device */
+	rc = aclint_swi_domain_init(node);
+	if (rc)
+		return rc;
+
+	/* Announce the ACLINT SWI device */
+	pr_info("%pOFP: providing IPIs for %d CPUs\n", node, nr_cpus);
+
+	return 0;
+}
+
+#ifdef CONFIG_RISCV_M_MODE
+IRQCHIP_DECLARE(riscv_aclint_swi, "riscv,clint0", aclint_swi_init);
+IRQCHIP_DECLARE(riscv_aclint_swi1, "sifive,clint0", aclint_swi_init);
+IRQCHIP_DECLARE(riscv_aclint_swi2, "riscv,aclint-mswi", aclint_swi_init);
+#else
+IRQCHIP_DECLARE(riscv_aclint_swi, "riscv,aclint-sswi", aclint_swi_init);
+#endif
-- 
2.25.1

Powered by blists - more mailing lists