| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210620175301.14988-12-martin@kaiser.cx>
Date: Sun, 20 Jun 2021 19:53:00 +0200
From: Martin Kaiser <martin@...ser.cx>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: linux-staging@...ts.linux.dev, kernel-janitors@...r.kernel.org,
linux-kernel@...r.kernel.org, Martin Kaiser <martin@...ser.cx>
Subject: [PATCH 12/13] staging: rtl8188eu: remove sdio defines
Remove sdio defines which are not used by this driver.
Signed-off-by: Martin Kaiser <martin@...ser.cx>
---
.../staging/rtl8188eu/include/rtl8188e_spec.h | 136 ------------------
1 file changed, 136 deletions(-)
diff --git a/drivers/staging/rtl8188eu/include/rtl8188e_spec.h b/drivers/staging/rtl8188eu/include/rtl8188e_spec.h
index 55cce1f6bd77..94baea8bc068 100644
--- a/drivers/staging/rtl8188eu/include/rtl8188e_spec.h
+++ b/drivers/staging/rtl8188eu/include/rtl8188e_spec.h
@@ -1089,142 +1089,6 @@ So the following defines for 92C is not entire!!!!!!
#define SCR_TXBCUSEDK BIT(6) /* Force Tx Bcast pkt Use Default Key */
#define SCR_RXBCUSEDK BIT(7) /* Force Rx Bcast pkt Use Default Key */
-/* RTL8188E SDIO Configuration */
-
-/* I/O bus domain address mapping */
-#define SDIO_LOCAL_BASE 0x10250000
-#define WLAN_IOREG_BASE 0x10260000
-#define FIRMWARE_FIFO_BASE 0x10270000
-#define TX_HIQ_BASE 0x10310000
-#define TX_MIQ_BASE 0x10320000
-#define TX_LOQ_BASE 0x10330000
-#define RX_RX0FF_BASE 0x10340000
-
-/* SDIO host local register space mapping. */
-#define SDIO_LOCAL_MSK 0x0FFF
-#define WLAN_IOREG_MSK 0x7FFF
-#define WLAN_FIFO_MSK 0x1FFF /* Aggregation Length[12:0] */
-#define WLAN_RX0FF_MSK 0x0003
-
-/* Without ref to the SDIO Device ID */
-#define SDIO_WITHOUT_REF_DEVICE_ID 0
-#define SDIO_LOCAL_DEVICE_ID 0 /* 0b[16], 000b[15:13] */
-#define WLAN_TX_HIQ_DEVICE_ID 4 /* 0b[16], 100b[15:13] */
-#define WLAN_TX_MIQ_DEVICE_ID 5 /* 0b[16], 101b[15:13] */
-#define WLAN_TX_LOQ_DEVICE_ID 6 /* 0b[16], 110b[15:13] */
-#define WLAN_RX0FF_DEVICE_ID 7 /* 0b[16], 111b[15:13] */
-#define WLAN_IOREG_DEVICE_ID 8 /* 1b[16] */
-
-/* SDIO Tx Free Page Index */
-#define HI_QUEUE_IDX 0
-#define MID_QUEUE_IDX 1
-#define LOW_QUEUE_IDX 2
-#define PUBLIC_QUEUE_IDX 3
-
-#define SDIO_MAX_TX_QUEUE 3 /* HIQ, MIQ and LOQ */
-#define SDIO_MAX_RX_QUEUE 1
-
-/* SDIO Tx Control */
-#define SDIO_REG_TX_CTRL 0x0000
-/* SDIO Host Interrupt Mask */
-#define SDIO_REG_HIMR 0x0014
-/* SDIO Host Interrupt Service Routine */
-#define SDIO_REG_HISR 0x0018
-/* HCI Current Power Mode */
-#define SDIO_REG_HCPWM 0x0019
-/* RXDMA Request Length */
-#define SDIO_REG_RX0_REQ_LEN 0x001C
-/* Free Tx Buffer Page */
-#define SDIO_REG_FREE_TXPG 0x0020
-/* HCI Current Power Mode 1 */
-#define SDIO_REG_HCPWM1 0x0024
-/* HCI Current Power Mode 2 */
-#define SDIO_REG_HCPWM2 0x0026
-/* HTSF Informaion */
-#define SDIO_REG_HTSFR_INFO 0x0030
-/* HCI Request Power Mode 1 */
-#define SDIO_REG_HRPWM1 0x0080
-/* HCI Request Power Mode 2 */
-#define SDIO_REG_HRPWM2 0x0082
-/* HCI Power Save Clock */
-#define SDIO_REG_HPS_CLKR 0x0084
-/* SDIO HCI Suspend Control */
-#define SDIO_REG_HSUS_CTRL 0x0086
-/* SDIO Host Extension Interrupt Mask Always */
-#define SDIO_REG_HIMR_ON 0x0090
-/* SDIO Host Extension Interrupt Status Always */
-#define SDIO_REG_HISR_ON 0x0091
-
-#define SDIO_HIMR_DISABLED 0
-
-/* RTL8188E SDIO Host Interrupt Mask Register */
-#define SDIO_HIMR_RX_REQUEST_MSK BIT(0)
-#define SDIO_HIMR_AVAL_MSK BIT(1)
-#define SDIO_HIMR_TXERR_MSK BIT(2)
-#define SDIO_HIMR_RXERR_MSK BIT(3)
-#define SDIO_HIMR_TXFOVW_MSK BIT(4)
-#define SDIO_HIMR_RXFOVW_MSK BIT(5)
-#define SDIO_HIMR_TXBCNOK_MSK BIT(6)
-#define SDIO_HIMR_TXBCNERR_MSK BIT(7)
-#define SDIO_HIMR_BCNERLY_INT_MSK BIT(16)
-#define SDIO_HIMR_C2HCMD_MSK BIT(17)
-#define SDIO_HIMR_CPWM1_MSK BIT(18)
-#define SDIO_HIMR_CPWM2_MSK BIT(19)
-#define SDIO_HIMR_HSISR_IND_MSK BIT(20)
-#define SDIO_HIMR_GTINT3_IND_MSK BIT(21)
-#define SDIO_HIMR_GTINT4_IND_MSK BIT(22)
-#define SDIO_HIMR_PSTIMEOUT_MSK BIT(23)
-#define SDIO_HIMR_OCPINT_MSK BIT(24)
-#define SDIO_HIMR_ATIMEND_MSK BIT(25)
-#define SDIO_HIMR_ATIMEND_E_MSK BIT(26)
-#define SDIO_HIMR_CTWEND_MSK BIT(27)
-
-/* RTL8188E SDIO Specific */
-#define SDIO_HIMR_MCU_ERR_MSK BIT(28)
-#define SDIO_HIMR_TSF_BIT32_TOGGLE_MSK BIT(29)
-
-/* SDIO Host Interrupt Service Routine */
-#define SDIO_HISR_RX_REQUEST BIT(0)
-#define SDIO_HISR_AVAL BIT(1)
-#define SDIO_HISR_TXERR BIT(2)
-#define SDIO_HISR_RXERR BIT(3)
-#define SDIO_HISR_TXFOVW BIT(4)
-#define SDIO_HISR_RXFOVW BIT(5)
-#define SDIO_HISR_TXBCNOK BIT(6)
-#define SDIO_HISR_TXBCNERR BIT(7)
-#define SDIO_HISR_BCNERLY_INT BIT(16)
-#define SDIO_HISR_C2HCMD BIT(17)
-#define SDIO_HISR_CPWM1 BIT(18)
-#define SDIO_HISR_CPWM2 BIT(19)
-#define SDIO_HISR_HSISR_IND BIT(20)
-#define SDIO_HISR_GTINT3_IND BIT(21)
-#define SDIO_HISR_GTINT4_IND BIT(22)
-#define SDIO_HISR_PSTIME BIT(23)
-#define SDIO_HISR_OCPINT BIT(24)
-#define SDIO_HISR_ATIMEND BIT(25)
-#define SDIO_HISR_ATIMEND_E BIT(26)
-#define SDIO_HISR_CTWEND BIT(27)
-
-/* RTL8188E SDIO Specific */
-#define SDIO_HISR_MCU_ERR BIT(28)
-#define SDIO_HISR_TSF_BIT32_TOGGLE BIT(29)
-
-#define MASK_SDIO_HISR_CLEAR \
- (SDIO_HISR_TXERR | SDIO_HISR_RXERR | SDIO_HISR_TXFOVW |\
- SDIO_HISR_RXFOVW | SDIO_HISR_TXBCNOK | SDIO_HISR_TXBCNERR |\
- SDIO_HISR_C2HCMD | SDIO_HISR_CPWM1 | SDIO_HISR_CPWM2 |\
- SDIO_HISR_HSISR_IND | SDIO_HISR_GTINT3_IND | SDIO_HISR_GTINT4_IND |\
- SDIO_HISR_PSTIMEOUT | SDIO_HISR_OCPINT)
-
-/* SDIO HCI Suspend Control Register */
-#define HCI_RESUME_PWR_RDY BIT(1)
-#define HCI_SUS_CTRL BIT(0)
-
-/* SDIO Tx FIFO related */
-/* The number of Tx FIFO free page */
-#define SDIO_TX_FREE_PG_QUEUE 4
-#define SDIO_TX_FIFO_PAGE_SZ 128
-
/* 0xFE00h ~ 0xFE55h USB Configuration */
/* 2 USB Information (0xFE17) */
--
2.20.1
Powered by blists - more mailing lists