linux-kernel - [RFC][PATCH 14/18] x86/xen: Make irq

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20210621120121.491136646@infradead.org>
Date:   Mon, 21 Jun 2021 13:12:47 +0200
From:   Peter Zijlstra <peterz@...radead.org>
To:     jpoimboe@...hat.com, tglx@...utronix.de
Cc:     linux-kernel@...r.kernel.org, peterz@...radead.org,
        joro@...tes.org, boris.ostrovsky@...cle.com, jgross@...e.com,
        x86@...nel.org, mbenes@...e.com
Subject: [RFC][PATCH 14/18] x86/xen: Make irq_enable() noinstr

vmlinux.o: warning: objtool: pv_ops[32]: native_irq_enable
vmlinux.o: warning: objtool: pv_ops[32]: __raw_callee_save_xen_irq_enable
vmlinux.o: warning: objtool: pv_ops[32]: xen_irq_enable_direct
vmlinux.o: warning: objtool: lock_is_held_type()+0xfe: call to pv_ops[32]() leaves .noinstr.text section

Signed-off-by: Peter Zijlstra (Intel) <peterz@...radead.org>
---
 arch/x86/kernel/paravirt.c |    7 ++++-
 arch/x86/xen/irq.c         |    4 +--
 arch/x86/xen/xen-asm.S     |   56 ++++++++++++++++++++++-----------------------
 3 files changed, 36 insertions(+), 31 deletions(-)

--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -258,6 +258,11 @@ static noinstr void pv_native_set_debugr
 	native_set_debugreg(regno, val);
 }
 
+static noinstr void pv_native_irq_enable(void)
+{
+	native_irq_enable();
+}
+
 struct paravirt_patch_template pv_ops = {
 	/* Cpu ops. */
 	.cpu.io_delay		= native_io_delay,
@@ -302,7 +307,7 @@ struct paravirt_patch_template pv_ops =
 	/* Irq ops. */
 	.irq.save_fl		= __PV_IS_CALLEE_SAVE(native_save_fl),
 	.irq.irq_disable	= __PV_IS_CALLEE_SAVE(native_irq_disable),
-	.irq.irq_enable		= __PV_IS_CALLEE_SAVE(native_irq_enable),
+	.irq.irq_enable		= __PV_IS_CALLEE_SAVE(pv_native_irq_enable),
 	.irq.safe_halt		= native_safe_halt,
 	.irq.halt		= native_halt,
 #endif /* CONFIG_PARAVIRT_XXL */
--- a/arch/x86/xen/irq.c
+++ b/arch/x86/xen/irq.c
@@ -53,7 +53,7 @@ asmlinkage __visible void xen_irq_disabl
 }
 PV_CALLEE_SAVE_REGS_THUNK(xen_irq_disable);
 
-asmlinkage __visible void xen_irq_enable(void)
+asmlinkage __visible noinstr void xen_irq_enable(void)
 {
 	struct vcpu_info *vcpu;
 
@@ -76,7 +76,7 @@ asmlinkage __visible void xen_irq_enable
 
 	preempt_enable();
 }
-PV_CALLEE_SAVE_REGS_THUNK(xen_irq_enable);
+__PV_CALLEE_SAVE_REGS_THUNK(xen_irq_enable, ".noinstr.text");
 
 static void xen_safe_halt(void)
 {
--- a/arch/x86/xen/xen-asm.S
+++ b/arch/x86/xen/xen-asm.S
@@ -22,33 +22,6 @@
 #include <linux/linkage.h>
 
 /*
- * Enable events.  This clears the event mask and tests the pending
- * event status with one and operation.  If there are pending events,
- * then enter the hypervisor to get them handled.
- */
-SYM_FUNC_START(xen_irq_enable_direct)
-	FRAME_BEGIN
-	/* Unmask events */
-	movb $0, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
-
-	/*
-	 * Preempt here doesn't matter because that will deal with any
-	 * pending interrupts.  The pending check may end up being run
-	 * on the wrong CPU, but that doesn't hurt.
-	 */
-
-	/* Test for pending */
-	testb $0xff, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_pending
-	jz 1f
-
-	call check_events
-1:
-	FRAME_END
-	ret
-SYM_FUNC_END(xen_irq_enable_direct)
-
-
-/*
  * Disabling events is simply a matter of making the event mask
  * non-zero.
  */
@@ -57,6 +30,8 @@ SYM_FUNC_START(xen_irq_disable_direct)
 	ret
 SYM_FUNC_END(xen_irq_disable_direct)
 
+.pushsection .noinstr.text, "ax"
+
 /*
  * Force an event check by making a hypercall, but preserve regs
  * before making the call.
@@ -86,7 +61,32 @@ SYM_FUNC_START(check_events)
 	ret
 SYM_FUNC_END(check_events)
 
-.pushsection .noinstr.text, "ax"
+/*
+ * Enable events.  This clears the event mask and tests the pending
+ * event status with one and operation.  If there are pending events,
+ * then enter the hypervisor to get them handled.
+ */
+SYM_FUNC_START(xen_irq_enable_direct)
+	FRAME_BEGIN
+	/* Unmask events */
+	movb $0, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
+
+	/*
+	 * Preempt here doesn't matter because that will deal with any
+	 * pending interrupts.  The pending check may end up being run
+	 * on the wrong CPU, but that doesn't hurt.
+	 */
+
+	/* Test for pending */
+	testb $0xff, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_pending
+	jz 1f
+
+	call check_events
+1:
+	FRAME_END
+	ret
+SYM_FUNC_END(xen_irq_enable_direct)
+
 /*
  * (xen_)save_fl is used to get the current interrupt enable status.
  * Callers expect the status to be in X86_EFLAGS_IF, and other bits