lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210621161616.77524-1-manivannan.sadhasivam@linaro.org>
Date:   Mon, 21 Jun 2021 21:46:08 +0530
From:   Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To:     gregkh@...uxfoundation.org
Cc:     hemantk@...eaurora.org, bbhatt@...eaurora.org,
        linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
        loic.poulain@...aro.org,
        Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
Subject: [PATCH 0/8] MHI patches for v5.14

Hi Greg,

Here is the MHI patch series for v5.14.

Summary of the patches:

1. Fixed an issue observed during the system resume where the host timesout
waiting for the M0 state. This has been fixed by adding M2 as the valid
resume state.

2. Added validation for the channel ID read from event ring.

3. Fixed the MHI wake routines used for the newer modems such as SDX55 and
SDX65 by using no-op routines only for the older modems and then relying on
the default routines provided by MHI stack for newer ones.

4. Added the missing "pci_disable_pcie_error_reporting()" call in
pci_generic controller error path.

5. Added support for processing the events based on the priorities. Earlier
a fixed priority was used for all events.

6. Fixed the power down latency by polling the device reset register
instead of waiting for the state change event.

7. Added a dedicated flag to the MHI client transfer APIs for inbound
buffer allocation by the MHI stack. Since this patch modifies the MHI
client drivers under "net/", Ack has been collected from the netdev
maintainer.

8. Added support for Cinterion MV31-W modem in pci_generic controller:
https://www.thalesgroup.com/en/markets/digital-identity-and-security/iot/iot-connectivity/products/iot-products/mv31-w-ultra-high

Thanks,
Mani

Baochen Qiang (1):
  bus: mhi: Wait for M2 state during system resume

Bhaumik Bhatt (2):
  bus: mhi: core: Validate channel ID when processing command
    completions
  bus: mhi: pci_generic: Apply no-op for wake using sideband wake
    boolean

Christophe JAILLET (1):
  bus: mhi: pci-generic: Add missing
    'pci_disable_pcie_error_reporting()' calls

Hemant Kumar (1):
  bus: mhi: core: Add support for processing priority of event ring

Loic Poulain (2):
  bus: mhi: core: Fix power down latency
  bus: mhi: Add inbound buffers allocation flag

ULRICH Thomas (1):
  bus: mhi: pci_generic: Add Cinterion MV31-W PCIe to MHI

 drivers/bus/mhi/core/init.c      |  3 +-
 drivers/bus/mhi/core/internal.h  |  2 +-
 drivers/bus/mhi/core/main.c      | 35 ++++++++++++-----
 drivers/bus/mhi/core/pm.c        | 19 +++------
 drivers/bus/mhi/pci_generic.c    | 67 ++++++++++++++++++++++++++++----
 drivers/net/mhi/net.c            |  2 +-
 drivers/net/wwan/mhi_wwan_ctrl.c |  2 +-
 include/linux/mhi.h              | 14 ++++++-
 net/qrtr/mhi.c                   |  2 +-
 9 files changed, 107 insertions(+), 39 deletions(-)

-- 
2.25.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ