Message-ID: <d870b5c9-f553-3448-c69e-f1e32e23feb9@codeaurora.org>
Date:   Wed, 23 Jun 2021 00:50:05 -0700
From:   Wesley Cheng <wcheng@...eaurora.org>
To:     Ferry Toth <fntoth@...il.com>, balbi@...nel.org,
        gregkh@...uxfoundation.org, robh+dt@...nel.org, agross@...nel.org,
        bjorn.andersson@...aro.org, frowand.list@...il.com
Cc:     linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
        devicetree@...r.kernel.org, linux-arm-msm@...r.kernel.org,
        jackp@...eaurora.org, heikki.krogerus@...ux.intel.com,
        andy.shevchenko@...il.com
Subject: Re: [PATCH v10 0/6] Re-introduce TX FIFO resize for larger EP
 bursting



On 6/22/2021 3:12 PM, Ferry Toth wrote:
> Hi
> 
> Op 23-06-2021 om 00:00 schreef Wesley Cheng:
>>
>> On 6/22/2021 1:09 PM, Ferry Toth wrote:
>>> Hi
>>>
>>> Op 22-06-2021 om 20:38 schreef Wesley Cheng:
>>>> On 6/19/2021 5:40 AM, Ferry Toth wrote:
>>>>> Hi
>>>>>
>>>>> Op 18-06-2021 om 00:25 schreef Wesley Cheng:
>>>>>> Hi,
>>>>>>
>>>>>> On 6/17/2021 2:55 PM, Ferry Toth wrote:
>>>>>>> Hi
>>>>>>>
>>>>>>> Op 17-06-2021 om 23:48 schreef Wesley Cheng:
>>>>>>>> Hi,
>>>>>>>>
>>>>>>>> On 6/17/2021 2:01 PM, Ferry Toth wrote:
>>>>>>>>> Hi
>>>>>>>>>
>>>>>>>>> Op 17-06-2021 om 11:58 schreef Wesley Cheng:
>>>>>>>>>> Changes in V10:
>>>>>>>>>>      - Fixed compilation errors in config where OF is not used
>>>>>>>>>> (error due to
>>>>>>>>>>        unknown symbol for of_add_property()).  Add
>>>>>>>>>> of_add_property()
>>>>>>>>>> stub.
>>>>>>>>>>      - Fixed compilation warning for incorrect argument being
>>>>>>>>>> passed to
>>>>>>>>>> dwc3_mdwidth
>>>>>>>>> This fixes the OOPS I had in V9. I do not see any change in
>>>>>>>>> performance
>>>>>>>>> on Merrifield though.
>>>>>>>> I see...thanks Ferry! With your testing, are you writing to the
>>>>>>>> device's
>>>>>>>> internal storage (ie UFS, eMMC, etc...), or did you use a
>>>>>>>> ramdisk as
>>>>>>>> well?
>>>>>>> In this case I just tested the EEM path using iperf3.
>>>>>>>
>>>>>> Got it.  I don't believe f_eem will use a high enough (if at all)
>>>>>> bMaxBurst value to change the TXFIFO size.
>>>>>>
>>>>>>>> If not with a ramdisk, we might want to give that a try to avoid
>>>>>>>> the
>>>>>>>> storage path being the bottleneck.  You can use "dd" to create an
>>>>>>>> empty
>>>>>>>> file, and then just use that as the LUN's backing file.
>>>>>>>>
>>>>>>>> echo ramdisk.img >
>>>>>>>> /sys/kernel/config/usb_gadget/g1/functions/mass_storage.0/lun.0/file
>>>>>>>>
>>>>>>> Ah, why didn't I think of that. I have currently mass storage setup
>>>>>>> with
>>>>>>> eMMC but it seems that is indeed the bottleneck.
>>>>>>>
>>>>> I created a 64MB disk following the instructions here
>>>>> http://www.linux-usb.org/gadget/file_storage.html (that seems a little
>>>>> outdated, at least I can not start the first partition at sector 8,
>>>>> but
>>>>> minimum 2048), and added a test file on it.
>>>>>
>>>>> I then copy the file to /dev/shm prior to setting configfs (composite
>>>>> device gser/eem/mass_storage/uac2).
>>>>>
>>>>> journal shows:
>>>>>
>>>>> kernel: Mass Storage Function, version: 2009/09/11
>>>>> kernel: LUN: removable file: (no medium)
>>>>>
>>>>> I don't know what that means, because I see the test file on the
>>>>> ramdisk.
>>>>>
>>>>> Then I again used gnome disks to benchmark (read/write 10MB):
>>>>>
>>>>> With V10 on top v5.13.0-rc5:
>>>>>
>>>>> R/W speed = 35.6/35.8MB/s, access time 0.35ms
>>>>>
>>>>> With no patches on top v5.12.0:
>>>>>
>>>>> R/W speed = 35.7/36.1MB/s, access time 0.35ms
>>>> Hi Ferry,
>>>>
>>>>> I see no speed difference (and it's about the same as with the eMMC
>>>>> backed disk). But the patches are causing a new call trace
>>>>>
>>>> Would you happen to know what DWC3 controller revision the device is
>>>> using?  The callstack print occurs, because it looks like it ran out of
>>>> internal memory, although there should be logic present for making sure
>>>> that at least there is enough room for 1 FIFO per endpoint.  (possibly
>>>> the logic/math depends on the controller revision)
>> Hi Ferry,
>>
>>> Do you know where I could find that in a file on the device?
>>>
>> Maybe you can just dump the DWC3 registers?
>> cat /sys/kernel/debug/usb/<controller name>/regdump
> 
> This isin host mode:
> 
> ~# cat /sys/kernel/debug/usb/dwc3.0.auto/regdump
> GSBUSCFG0 = 0x00000006
> GSBUSCFG1 = 0x00000f00
> GTXTHRCFG = 0x230a0000
> GRXTHRCFG = 0x22800000
> GCTL = 0x45801002
> GEVTEN = 0x00000000
> GSTS = 0x3e800001
> GUCTL1 = 0x00000000
> GSNPSID = 0x5533250a
> GGPIO = 0x00000000
> GUID = 0x00050d00
> GUCTL = 0x0200ce00
> GBUSERRADDR0 = 0x00000000
> GBUSERRADDR1 = 0x00000000
...
> 

Hi Ferry,

Great!  Thanks, that got me the information regarding the DWC3 revision
you're using. (its version 2.50a)  I checked the DWC3 databook and looks
like certain versions have some different math to calculate the TXFIFO
size.  I have taken this into account and factored that in in the next
revision.

Is there a way you could collect the regdump in device mode w/ mass
storage only composition after enumerating with the PC?  That would help
confirm how the TXFIFO resizing logic is working on your platform.

Thanks
Wesley Cheng

>> Was going to ask for the same to confirm the TXFIFO sizes from your
>> results below :).
>>
>>> Otherwise, I'm hoping Andy will know?
>>>
>>>> Also, is there a way to use just a mass storage only composition? 
>>>> Based
>>>> on the above observation, that probably means that the mass storage
>>>> interface wasn't resized at all, because the configuration took up a
>>>> lot
>>>> of the internal FIFO space.
>>> Sure, it's configured through configfs. With only mass_storage I have:
>>>
>>> With V10 on top v5.13.0-rc5:
>>>
>>> R/W speed = 41,6/39,3MB/s, access time 0.33ms
>>>
>>> With no patches on top v5.12.0:
>>>
>>> R/W speed = 41,1/38,7MB/s, access time 0.38ms
>>>
>> Thanks Ferry!  Could you collect the regdump, so I can confirm the two
>> things mentioned?
>>
>> Thanks
>> Wesley Cheng
>>
>>>> Thanks
>>>> Wesley Cheng
>>>>
>>>>> kernel: using random self ethernet address
>>>>> kernel: using random host ethernet address
>>>>> kernel: Mass Storage Function, version: 2009/09/11
>>>>> kernel: LUN: removable file: (no medium)
>>>>> kernel: usb0: HOST MAC aa:bb:cc:dd:ee:f2
>>>>> kernel: usb0: MAC aa:bb:cc:dd:ee:f1
>>>>> kernel: IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready
>>>>> kernel: dwc3 dwc3.0.auto: Fifosize(2154) > RAM size(2022) ep5in
>>>>> depth:115540359
>>>>> kernel: ------------[ cut here ]------------
>>>>> kernel: WARNING: CPU: 0 PID: 594 at drivers/usb/gadget/udc/core.c:278
>>>>> usb_ep_queue+0x75/0x80
>>>>> kernel: Modules linked in: usb_f_uac2 u_audio usb_f_mass_storage
>>>>> usb_f_eem u_ether usb_f_serial u_serial libcomposite rfcomm
>>>>> iptable_nat
>>>>> bnep snd_sof_nocodec spi_pxa2>
>>>>> kernel: CPU: 0 PID: 594 Comm: irq/14-dwc3 Not tainted
>>>>> 5.13.0-rc5-edison-acpi-standard #1
>>>>> kernel: Hardware name: Intel Corporation Merrifield/BODEGA BAY,
>>>>> BIOS 542
>>>>> 2015.01.21:18.19.48
>>>>> kernel: RIP: 0010:usb_ep_queue+0x75/0x80
>>>>> kernel: Code: 01 73 e4 48 8b 05 fb 63 06 01 48 85 c0 74 12 48 8b 78 08
>>>>> 44 89 e9 4c 89 e2 48 89 ee e8 74 05 00 00 44 89 e8 5d 41 5c 41 5d c3
>>>>> <0f> 0b 41 bd 94 ff ff ff >
>>>>> kernel: RSP: 0000:ffff91eec083fc98 EFLAGS: 00010082
>>>>> kernel: RAX: ffff8af20357d960 RBX: 0000000000000000 RCX:
>>>>> ffff8af202f06400
>>>>> kernel: RDX: 0000000000000a20 RSI: ffff8af208785780 RDI:
>>>>> ffff8af202e9ae00
>>>>> kernel: RBP: ffff8af202e9ae00 R08: 00000000000000c0 R09:
>>>>> ffff8af208785780
>>>>> kernel: R10: 00000000ffffe000 R11: 3fffffffffffffff R12:
>>>>> ffff8af208785780
>>>>> kernel: R13: 0000000000000000 R14: ffff8af202e9ae00 R15:
>>>>> ffff8af203e26cc0
>>>>> kernel: FS:  0000000000000000(0000) GS:ffff8af23e200000(0000)
>>>>> knlGS:0000000000000000
>>>>> kernel: CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>>>>> kernel: CR2: 000055e2c21f2100 CR3: 0000000003b38000 CR4:
>>>>> 00000000001006f0
>>>>> kernel: Call Trace:
>>>>> kernel:  u_audio_start_playback+0x107/0x1a0 [u_audio]
>>>>> kernel:  composite_setup+0x224/0x1ba0 [libcomposite]
>>>>> kernel:  ? dwc3_gadget_ep_queue+0xf6/0x1a0
>>>>> kernel:  ? usb_ep_queue+0x2a/0x80
>>>>> kernel:  ? configfs_composite_setup+0x6b/0x90 [libcomposite]
>>>>> kernel:  configfs_composite_setup+0x6b/0x90 [libcomposite]
>>>>> kernel:  dwc3_ep0_interrupt+0x469/0xa80
>>>>> kernel:  dwc3_thread_interrupt+0x8ee/0xf40
>>>>> kernel:  ? __wake_up_common_lock+0x85/0xb0
>>>>> kernel:  ? disable_irq_nosync+0x10/0x10
>>>>> kernel:  irq_thread_fn+0x1b/0x60
>>>>> kernel:  irq_thread+0xd6/0x170
>>>>> kernel:  ? irq_thread_check_affinity+0x70/0x70
>>>>> kernel:  ? irq_forced_thread_fn+0x70/0x70
>>>>> kernel:  kthread+0x116/0x130
>>>>> kernel:  ? kthread_create_worker_on_cpu+0x60/0x60
>>>>> kernel:  ret_from_fork+0x22/0x30
>>>>> kernel: ---[ end trace e5b9e28058c53584 ]---
>>>>> kernel: configfs-gadget gadget: u_audio_start_playback:451 Error!
>>>>> kernel: configfs-gadget gadget: u_audio_start_playback:451 Error!
>>>>> kernel: dwc3 dwc3.0.auto: request 000000003c32dcc5 was not queued to
>>>>> ep5in
>>>>> kernel: dwc3 dwc3.0.auto: request 00000000b2512aa9 was not queued to
>>>>> ep5in
>>>>> kernel: dwc3 dwc3.0.auto: Fifosize(2154) > RAM size(2022) ep5in
>>>>> depth:115540359
>>>>> kernel: configfs-gadget gadget: u_audio_start_playback:451 Error!
>>>>> kernel: configfs-gadget gadget: u_audio_start_playback:451 Error!
>>>>> kernel: dwc3 dwc3.0.auto: request 00000000b2512aa9 was not queued to
>>>>> ep5in
>>>>> kernel: dwc3 dwc3.0.auto: request 00000000036ac129 was not queued to
>>>>> ep5in
>>>>> kernel: dwc3 dwc3.0.auto: Fifosize(2154) > RAM size(2022) ep5in
>>>>> depth:115540359
>>>>> kernel: configfs-gadget gadget: u_audio_start_playback:451 Error!
>>>>> kernel: configfs-gadget gadget: u_audio_start_playback:451 Error!
>>>>> kernel: dwc3 dwc3.0.auto: request 00000000ad1b8c18 was not queued to
>>>>> ep5in
>>>>> kernel: dwc3 dwc3.0.auto: request 00000000fbc71244 was not queued to
>>>>> ep5in
>>>>> kernel: dwc3 dwc3.0.auto: Fifosize(2154) > RAM size(2022) ep5in
>>>>> depth:115540359
>>>>> kernel: configfs-gadget gadget: u_audio_start_playback:451 Error!
>>>>> kernel: configfs-gadget gadget: u_audio_start_playback:451 Error!
>>>>> kernel: dwc3 dwc3.0.auto: request 00000000fbc71244 was not queued to
>>>>> ep5in
>>>>> kernel: dwc3 dwc3.0.auto: request 00000000ad1b8c18 was not queued to
>>>>> ep5in
>>>>> kernel: dwc3 dwc3.0.auto: Fifosize(2154) > RAM size(2022) ep5in
>>>>> depth:115540359
>>>>> kernel: configfs-gadget gadget: u_audio_start_playback:451 Error!
>>>>> kernel: configfs-gadget gadget: u_audio_start_playback:451 Error!
>>>>> kernel: dwc3 dwc3.0.auto: request 000000003c32dcc5 was not queued to
>>>>> ep5in
>>>>> kernel: dwc3 dwc3.0.auto: request 00000000b2512aa9 was not queued to
>>>>> ep5in
>>>>>
>>>>> Removing uac2 from the config makes the call trace go away, but the
>>>>> R/W
>>>>> speed does not change.
>>>>>
>>>>>> :), not a problem...I've been working on getting the ideal set up for
>>>>>> the performance profiling for awhile, so anything I can do to make
>>>>>> sure
>>>>>> we get some good results.
>>>>>>
>>>>>>> I'll try with a ramdisk and let you know.
>>>>>>>
>>>>>> Thanks again for the testing, Ferry.
>>>>>>
>>>>>> Thanks
>>>>>> Wesley Cheng
>>>>>>
>>>>>>>> Thanks
>>>>>>>> Wesley Cheng
>>>>>>>>
>>>>>>>>>> Changes in V9:
>>>>>>>>>>      - Fixed incorrect patch in series.  Removed changes in
>>>>>>>>>> DTSI, as
>>>>>>>>>> dwc3-qcom will
>>>>>>>>>>        add the property by default from the kernel.
>>>>>>>>>>
>>>>>>>>>> Changes in V8:
>>>>>>>>>>      - Rebased to usb-testing
>>>>>>>>>>      - Using devm_kzalloc for adding txfifo property in dwc3-qcom
>>>>>>>>>>      - Removed DWC3 QCOM ACPI property for enabling the txfifo
>>>>>>>>>> resize
>>>>>>>>>>
>>>>>>>>>> Changes in V7:
>>>>>>>>>>      - Added a new property tx-fifo-max-num for limiting how much
>>>>>>>>>> fifo
>>>>>>>>>> space the
>>>>>>>>>>        resizing logic can allocate for endpoints with large burst
>>>>>>>>>> values.  This
>>>>>>>>>>        can differ across platforms, and tie in closely with
>>>>>>>>>> overall
>>>>>>>>>> system latency.
>>>>>>>>>>      - Added recommended checks for DWC32.
>>>>>>>>>>      - Added changes to set the tx-fifo-resize property from
>>>>>>>>>> dwc3-qcom by
>>>>>>>>>> default
>>>>>>>>>>        instead of modifying the current DTSI files.
>>>>>>>>>>      - Added comments on all APIs/variables introduced.
>>>>>>>>>>      - Updated the DWC3 YAML to include a better description
>>>>>>>>>> of the
>>>>>>>>>> tx-fifo-resize
>>>>>>>>>>        property and added an entry for tx-fifo-max-num.
>>>>>>>>>>
>>>>>>>>>> Changes in V6:
>>>>>>>>>>      - Rebased patches to usb-testing.
>>>>>>>>>>      - Renamed to PATCH series instead of RFC.
>>>>>>>>>>      - Checking for fs_descriptors instead of ss_descriptors for
>>>>>>>>>> determining the
>>>>>>>>>>        endpoint count for a particular configuration.
>>>>>>>>>>      - Re-ordered patch series to fix patch dependencies.
>>>>>>>>>>
>>>>>>>>>> Changes in V5:
>>>>>>>>>>      - Added check_config() logic, which is used to
>>>>>>>>>> communicate the
>>>>>>>>>> number of EPs
>>>>>>>>>>        used in a particular configuration.  Based on this, the
>>>>>>>>>> DWC3
>>>>>>>>>> gadget driver
>>>>>>>>>>        has the ability to know the maximum number of eps
>>>>>>>>>> utilized in
>>>>>>>>>> all
>>>>>>>>>> configs.
>>>>>>>>>>        This helps reduce unnecessary allocation to unused eps,
>>>>>>>>>> and will
>>>>>>>>>> catch fifo
>>>>>>>>>>        allocation issues at bind() time.
>>>>>>>>>>      - Fixed variable declaration to single line per variable,
>>>>>>>>>> and
>>>>>>>>>> reverse xmas.
>>>>>>>>>>      - Created a helper for fifo clearing, which is used by ep0.c
>>>>>>>>>>
>>>>>>>>>> Changes in V4:
>>>>>>>>>>      - Removed struct dwc3* as an argument for
>>>>>>>>>> dwc3_gadget_resize_tx_fifos()
>>>>>>>>>>      - Removed WARN_ON(1) in case we run out of fifo space
>>>>>>>>>>      Changes in V3:
>>>>>>>>>>      - Removed "Reviewed-by" tags
>>>>>>>>>>      - Renamed series back to RFC
>>>>>>>>>>      - Modified logic to ensure that fifo_size is reset if we
>>>>>>>>>> pass the
>>>>>>>>>> minimum
>>>>>>>>>>        threshold.  Tested with binding multiple FDs requesting 6
>>>>>>>>>> FIFOs.
>>>>>>>>>>
>>>>>>>>>> Changes in V2:
>>>>>>>>>>      - Modified TXFIFO resizing logic to ensure that each EP is
>>>>>>>>>> reserved a
>>>>>>>>>>        FIFO.
>>>>>>>>>>      - Removed dev_dbg() prints and fixed typos from patches
>>>>>>>>>>      - Added some more description on the dt-bindings commit
>>>>>>>>>> message
>>>>>>>>>>
>>>>>>>>>> Currently, there is no functionality to allow for resizing the
>>>>>>>>>> TXFIFOs, and
>>>>>>>>>> relying on the HW default setting for the TXFIFO depth.  In most
>>>>>>>>>> cases, the
>>>>>>>>>> HW default is probably sufficient, but for USB compositions that
>>>>>>>>>> contain
>>>>>>>>>> multiple functions that require EP bursting, the default settings
>>>>>>>>>> might not be enough.  Also to note, the current SW will assign an
>>>>>>>>>> EP to a
>>>>>>>>>> function driver w/o checking to see if the TXFIFO size for that
>>>>>>>>>> particular
>>>>>>>>>> EP is large enough. (this is a problem if there are multiple HW
>>>>>>>>>> defined
>>>>>>>>>> values for the TXFIFO size)
>>>>>>>>>>
>>>>>>>>>> It is mentioned in the SNPS databook that a minimum of TX FIFO
>>>>>>>>>> depth = 3
>>>>>>>>>> is required for an EP that supports bursting.  Otherwise, there
>>>>>>>>>> may be
>>>>>>>>>> frequent occurences of bursts ending.  For high bandwidth
>>>>>>>>>> functions,
>>>>>>>>>> such as data tethering (protocols that support data aggregation),
>>>>>>>>>> mass
>>>>>>>>>> storage, and media transfer protocol (over FFS), the bMaxBurst
>>>>>>>>>> value
>>>>>>>>>> can be
>>>>>>>>>> large, and a bigger TXFIFO depth may prove to be beneficial in
>>>>>>>>>> terms
>>>>>>>>>> of USB
>>>>>>>>>> throughput. (which can be associated to system access latency,
>>>>>>>>>> etc...)  It
>>>>>>>>>> allows for a more consistent burst of traffic, w/o any
>>>>>>>>>> interruptions, as
>>>>>>>>>> data is readily available in the FIFO.
>>>>>>>>>>
>>>>>>>>>> With testing done using the mass storage function driver, the
>>>>>>>>>> results
>>>>>>>>>> show
>>>>>>>>>> that with a larger TXFIFO depth, the bandwidth increased
>>>>>>>>>> significantly.
>>>>>>>>>>
>>>>>>>>>> Test Parameters:
>>>>>>>>>>      - Platform: Qualcomm SM8150
>>>>>>>>>>      - bMaxBurst = 6
>>>>>>>>>>      - USB req size = 256kB
>>>>>>>>>>      - Num of USB reqs = 16
>>>>>>>>>>      - USB Speed = Super-Speed
>>>>>>>>>>      - Function Driver: Mass Storage (w/ ramdisk)
>>>>>>>>>>      - Test Application: CrystalDiskMark
>>>>>>>>>>
>>>>>>>>>> Results:
>>>>>>>>>>
>>>>>>>>>> TXFIFO Depth = 3 max packets
>>>>>>>>>>
>>>>>>>>>> Test Case | Data Size | AVG tput (in MB/s)
>>>>>>>>>> -------------------------------------------
>>>>>>>>>> Sequential|1 GB x     |
>>>>>>>>>> Read      |9 loops    | 193.60
>>>>>>>>>>          |           | 195.86
>>>>>>>>>>               |           | 184.77
>>>>>>>>>>               |           | 193.60
>>>>>>>>>> -------------------------------------------
>>>>>>>>>>
>>>>>>>>>> TXFIFO Depth = 6 max packets
>>>>>>>>>>
>>>>>>>>>> Test Case | Data Size | AVG tput (in MB/s)
>>>>>>>>>> -------------------------------------------
>>>>>>>>>> Sequential|1 GB x     |
>>>>>>>>>> Read      |9 loops    | 287.35
>>>>>>>>>>          |           | 304.94
>>>>>>>>>>               |           | 289.64
>>>>>>>>>>               |           | 293.61
>>>>>>>>>> -------------------------------------------
>>>>>>>>>>
>>>>>>>>>> Wesley Cheng (6):
>>>>>>>>>>       usb: gadget: udc: core: Introduce check_config to verify
>>>>>>>>>> USB
>>>>>>>>>>         configuration
>>>>>>>>>>       usb: gadget: configfs: Check USB configuration before
>>>>>>>>>> adding
>>>>>>>>>>       usb: dwc3: Resize TX FIFOs to meet EP bursting requirements
>>>>>>>>>>       of: Add stub for of_add_property()
>>>>>>>>>>       usb: dwc3: dwc3-qcom: Enable tx-fifo-resize property by
>>>>>>>>>> default
>>>>>>>>>>       dt-bindings: usb: dwc3: Update dwc3 TX fifo properties
>>>>>>>>>>
>>>>>>>>>>      .../devicetree/bindings/usb/snps,dwc3.yaml         |  15 +-
>>>>>>>>>>      drivers/usb/dwc3/core.c                            |   9 +
>>>>>>>>>>      drivers/usb/dwc3/core.h                            |  15 ++
>>>>>>>>>>      drivers/usb/dwc3/dwc3-qcom.c                       |   9 +
>>>>>>>>>>      drivers/usb/dwc3/ep0.c                             |   2 +
>>>>>>>>>>      drivers/usb/dwc3/gadget.c                          | 212
>>>>>>>>>> +++++++++++++++++++++
>>>>>>>>>>      drivers/usb/gadget/configfs.c                      |  22 +++
>>>>>>>>>>      drivers/usb/gadget/udc/core.c                      |  25 +++
>>>>>>>>>>      include/linux/of.h                                 |   5 +
>>>>>>>>>>      include/linux/usb/gadget.h                         |   5 +
>>>>>>>>>>      10 files changed, 317 insertions(+), 2 deletions(-)
>>>>>>>>>>

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

Powered by blists - more mailing lists