linux-kernel - Re: [PATCH] i2c: robotfuzz-osif: fix control-request directions

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <YNL2NLSpBQqnc2bH@hovoldconsulting.com>
Date:   Wed, 23 Jun 2021 10:52:04 +0200
From:   Johan Hovold <johan@...nel.org>
To:     Wolfram Sang <wsa@...nel.org>
Cc:     linux-i2c@...r.kernel.org, linux-usb@...r.kernel.org,
        linux-kernel@...r.kernel.org,
        syzbot+9d7dadd15b8819d73f41@...kaller.appspotmail.com,
        stable@...r.kernel.org, Andrew Lunn <andrew@...n.ch>
Subject: Re: [PATCH] i2c: robotfuzz-osif: fix control-request directions

On Mon, May 24, 2021 at 11:09:12AM +0200, Johan Hovold wrote:
> The direction of the pipe argument must match the request-type direction
> bit or control requests may fail depending on the host-controller-driver
> implementation.
> 
> Control transfers without a data stage are treated as OUT requests by
> the USB stack and should be using usb_sndctrlpipe(). Failing to do so
> will now trigger a warning.
> 
> Fix the OSIFI2C_SET_BIT_RATE and OSIFI2C_STOP requests which erroneously
> used the osif_usb_read() helper and set the IN direction bit.
> 
> Reported-by: syzbot+9d7dadd15b8819d73f41@...kaller.appspotmail.com
> Fixes: 83e53a8f120f ("i2c: Add bus driver for for OSIF USB i2c device.")
> Cc: stable@...r.kernel.org      # 3.14
> Cc: Andrew Lunn <andrew@...n.ch>
> Signed-off-by: Johan Hovold <johan@...nel.org>
> ---

Wolfram, can you pick this one up for 5.14?

Johan

>  drivers/i2c/busses/i2c-robotfuzz-osif.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-robotfuzz-osif.c b/drivers/i2c/busses/i2c-robotfuzz-osif.c
> index a39f7d092797..66dfa211e736 100644
> --- a/drivers/i2c/busses/i2c-robotfuzz-osif.c
> +++ b/drivers/i2c/busses/i2c-robotfuzz-osif.c
> @@ -83,7 +83,7 @@ static int osif_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs,
>  			}
>  		}
>  
> -		ret = osif_usb_read(adapter, OSIFI2C_STOP, 0, 0, NULL, 0);
> +		ret = osif_usb_write(adapter, OSIFI2C_STOP, 0, 0, NULL, 0);
>  		if (ret) {
>  			dev_err(&adapter->dev, "failure sending STOP\n");
>  			return -EREMOTEIO;
> @@ -153,7 +153,7 @@ static int osif_probe(struct usb_interface *interface,
>  	 * Set bus frequency. The frequency is:
>  	 * 120,000,000 / ( 16 + 2 * div * 4^prescale).
>  	 * Using dev = 52, prescale = 0 give 100KHz */
> -	ret = osif_usb_read(&priv->adapter, OSIFI2C_SET_BIT_RATE, 52, 0,
> +	ret = osif_usb_write(&priv->adapter, OSIFI2C_SET_BIT_RATE, 52, 0,
>  			    NULL, 0);
>  	if (ret) {
>  		dev_err(&interface->dev, "failure sending bit rate");