[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210623032802.3377-1-jhp@endlessos.org>
Date: Wed, 23 Jun 2021 11:28:03 +0800
From: Jian-Hong Pan <jhp@...lessos.org>
To: Florian Fainelli <f.fainelli@...il.com>,
Stefan Wahren <stefan.wahren@...e.com>,
Doug Berger <opendmb@...il.com>
Cc: Andrew Lunn <andrew@...n.ch>,
bcm-kernel-feedback-list@...adcom.com, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, linux@...lessos.org,
linux-rpi-kernel@...ts.infradead.org,
Jian-Hong Pan <jhp@...lessos.org>
Subject: [PATCH v2] net: bcmgenet: Fix attaching to PYH failed on RPi 4B
The Broadcom UniMAC MDIO bus from mdio-bcm-unimac module comes too late.
So, GENET cannot find the ethernet PHY on UniMAC MDIO bus. This leads
GENET fail to attach the PHY as following log:
bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
...
could not attach to PHY
bcmgenet fd580000.ethernet eth0: failed to connect to PHY
uart-pl011 fe201000.serial: no DMA platform data
libphy: bcmgenet MII bus: probed
...
unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
This patch adds the soft dependency to load mdio-bcm-unimac module
before genet module to avoid the issue.
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=213485
Signed-off-by: Jian-Hong Pan <jhp@...lessos.org>
---
v2: Load mdio-bcm-unimac before genet module instead of trying to
connect the PHY in a loop.
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index fcca023f22e5..41f7f078cd27 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -4296,3 +4296,4 @@ MODULE_AUTHOR("Broadcom Corporation");
MODULE_DESCRIPTION("Broadcom GENET Ethernet controller driver");
MODULE_ALIAS("platform:bcmgenet");
MODULE_LICENSE("GPL");
+MODULE_SOFTDEP("pre: mdio-bcm-unimac");
--
2.32.0
Powered by blists - more mailing lists