linux-kernel - [PATCH v3 4/4] MIPS: CI20: Add second percpu timer for SMP.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1624547189-61079-5-git-send-email-zhouyanjie@wanyeetech.com>
Date:   Thu, 24 Jun 2021 23:06:29 +0800
From:   周琰杰 (Zhou Yanjie) 
        <zhouyanjie@...yeetech.com>
To:     tsbogend@...ha.franken.de, mturquette@...libre.com,
        sboyd@...nel.org, paul@...pouillou.net, robh+dt@...nel.org
Cc:     linux-mips@...r.kernel.org, devicetree@...r.kernel.org,
        linux-clk@...r.kernel.org, linux-kernel@...r.kernel.org,
        dongsheng.qiu@...enic.com, aric.pzqi@...enic.com,
        rick.tyliu@...enic.com, sihui.liu@...enic.com,
        jun.jiang@...enic.com, sernia.zhou@...mail.com
Subject: [PATCH v3 4/4] MIPS: CI20: Add second percpu timer for SMP.

1.Add a new TCU channel as the percpu timer of core1, this is to
  prepare for the subsequent SMP support. The newly added channel
  will not adversely affect the current single-core state.
2.Adjust the position of TCU node to make it consistent with the
  order in jz4780.dtsi file.

Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@...yeetech.com>
---

Notes:
    v2:
    New patch.
    
    v2->v3:
    No change.

 arch/mips/boot/dts/ingenic/ci20.dts | 21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)

diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
index 8877c62..70005cc 100644
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -118,6 +118,17 @@
 	assigned-clock-rates = <48000000>;
 };
 
+&tcu {
+	/*
+	 * 750 kHz for the system timers and 3 MHz for the clocksources,
+	 * use channel #0 and #1 for the per cpu system timers, and use
+	 * channel #2 for the clocksource.
+	 */
+	assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
+					  <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_OST>;
+	assigned-clock-rates = <750000>, <750000>, <3000000>, <3000000>;
+};
+
 &mmc0 {
 	status = "okay";
 
@@ -522,13 +533,3 @@
 		bias-disable;
 	};
 };
-
-&tcu {
-	/*
-	 * 750 kHz for the system timer and 3 MHz for the clocksource,
-	 * use channel #0 for the system timer, #1 for the clocksource.
-	 */
-	assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
-					  <&tcu TCU_CLK_OST>;
-	assigned-clock-rates = <750000>, <3000000>, <3000000>;
-};
-- 
2.7.4