linux-kernel - [PATCH v3 1/7] phy: Distinguish between Rx and Tx for MIPI D-PHY with submodes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20210624184108.21312-2-p.yadav@ti.com>
Date:   Fri, 25 Jun 2021 00:11:02 +0530
From:   Pratyush Yadav <p.yadav@...com>
To:     Vinod Koul <vkoul@...nel.org>
CC:     Nikhil Devshatwar <nikhil.nd@...com>,
        Tomi Valkeinen <tomi.valkeinen@...asonboard.com>,
        Laurent Pinchart <laurent.pinchart@...asonboard.com>,
        Paul Kocialkowski <paul.kocialkowski@...tlin.com>,
        Vignesh Raghavendra <vigneshr@...com>,
        Pratyush Yadav <p.yadav@...com>,
        Kishon Vijay Abraham I <kishon@...com>,
        <linux-kernel@...r.kernel.org>, <linux-phy@...ts.infradead.org>
Subject: [PATCH v3 1/7] phy: Distinguish between Rx and Tx for MIPI D-PHY with submodes

From: Paul Kocialkowski <paul.kocialkowski@...tlin.com>

As some D-PHY controllers support both Rx and Tx mode, we need a way for
users to explicitly request one or the other. For instance, Rx mode can
be used along with MIPI CSI-2 while Tx mode can be used with MIPI DSI.

Introduce new MIPI D-PHY PHY submodes to use with PHY_MODE_MIPI_DPHY.
The default (zero value) is kept to Tx so only the rkisp1 driver, which
uses D-PHY in Rx mode, needs to be adapted.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@...tlin.com>
Signed-off-by: Pratyush Yadav <p.yadav@...com>
---

(no changes since v1)

 include/linux/phy/phy-mipi-dphy.h | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/include/linux/phy/phy-mipi-dphy.h b/include/linux/phy/phy-mipi-dphy.h
index a877ffee845d..0f57ef46a8b5 100644
--- a/include/linux/phy/phy-mipi-dphy.h
+++ b/include/linux/phy/phy-mipi-dphy.h
@@ -6,6 +6,19 @@
 #ifndef __PHY_MIPI_DPHY_H_
 #define __PHY_MIPI_DPHY_H_
 
+/**
+ * enum phy_mipi_dphy_submode - MIPI D-PHY sub-mode
+ *
+ * A MIPI D-PHY can be used to transmit or receive data.
+ * Since some controllers can support both, the direction to enable is specified
+ * with the PHY sub-mode. Transmit is assumed by default with phy_set_mode.
+ */
+
+enum phy_mipi_dphy_submode {
+	PHY_MIPI_DPHY_SUBMODE_TX = 0,
+	PHY_MIPI_DPHY_SUBMODE_RX,
+};
+
 /**
  * struct phy_configure_opts_mipi_dphy - MIPI D-PHY configuration set
  *
-- 
2.30.0