| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20210625235532.19575-9-dipenp@nvidia.com>
Date: Fri, 25 Jun 2021 16:55:29 -0700
From: Dipen Patel <dipenp@...dia.com>
To: <thierry.reding@...il.com>, <jonathanh@...dia.com>,
<linux-kernel@...r.kernel.org>, <linux-tegra@...r.kernel.org>,
<linux-gpio@...r.kernel.org>, <linus.walleij@...aro.org>,
<bgolaszewski@...libre.com>, <warthog618@...il.com>,
<devicetree@...r.kernel.org>, <linux-doc@...r.kernel.org>,
<dipenp@...dia.com>, <robh+dt@...nel.org>
Subject: [RFC 08/11] gpiolib: cdev: Add hardware timestamp clock type
This patch adds new clock type for the GPIO controller which can
timestamp gpio lines using hardware means. To expose such
functionalities to the userspace, code has been added in this patch
where during line create call, it checks for new clock type and if
requested, calls hardware timestamp related API from gpiolib.c.
During line change event, it retrieves timestamp in nano seconds by
calling gpiod_get_hw_timestamp API from gpiolib.c. At the line release,
it disables this functionality by calling gpiod_hw_timestamp_control.
Signed-off-by: Dipen Patel <dipenp@...dia.com>
---
drivers/gpio/gpiolib-cdev.c | 65 +++++++++++++++++++++++++++++++++++--
include/uapi/linux/gpio.h | 1 +
2 files changed, 64 insertions(+), 2 deletions(-)
diff --git a/drivers/gpio/gpiolib-cdev.c b/drivers/gpio/gpiolib-cdev.c
index 1631727bf0da..9f98c727e937 100644
--- a/drivers/gpio/gpiolib-cdev.c
+++ b/drivers/gpio/gpiolib-cdev.c
@@ -518,6 +518,7 @@ struct linereq {
GPIO_V2_LINE_DRIVE_FLAGS | \
GPIO_V2_LINE_EDGE_FLAGS | \
GPIO_V2_LINE_FLAG_EVENT_CLOCK_REALTIME | \
+ GPIO_V2_LINE_FLAG_EVENT_CLOCK_HARDWARE | \
GPIO_V2_LINE_BIAS_FLAGS)
static void linereq_put_event(struct linereq *lr,
@@ -540,9 +541,20 @@ static void linereq_put_event(struct linereq *lr,
static u64 line_event_timestamp(struct line *line)
{
+ bool block;
+
if (test_bit(FLAG_EVENT_CLOCK_REALTIME, &line->desc->flags))
return ktime_get_real_ns();
+ if (test_bit(FLAG_EVENT_CLOCK_HARDWARE, &line->desc->flags)) {
+ if (irq_count())
+ block = false;
+ else
+ block = true;
+
+ return gpiod_get_hw_timestamp(line->desc, block);
+ }
+
return ktime_get_ns();
}
@@ -828,6 +840,7 @@ static int edge_detector_setup(struct line *line,
return ret;
line->irq = irq;
+
return 0;
}
@@ -891,7 +904,6 @@ static int gpio_v2_line_flags_validate(u64 flags)
/* Return an error if an unknown flag is set */
if (flags & ~GPIO_V2_LINE_VALID_FLAGS)
return -EINVAL;
-
/*
* Do not allow both INPUT and OUTPUT flags to be set as they are
* contradictory.
@@ -900,6 +912,14 @@ static int gpio_v2_line_flags_validate(u64 flags)
(flags & GPIO_V2_LINE_FLAG_OUTPUT))
return -EINVAL;
+ /*
+ * Do not mix with any other clocks if hardware assisted timestamp is
+ * asked.
+ */
+ if ((flags & GPIO_V2_LINE_FLAG_EVENT_CLOCK_REALTIME) &&
+ (flags & GPIO_V2_LINE_FLAG_EVENT_CLOCK_HARDWARE))
+ return -EINVAL;
+
/* Edge detection requires explicit input. */
if ((flags & GPIO_V2_LINE_EDGE_FLAGS) &&
!(flags & GPIO_V2_LINE_FLAG_INPUT))
@@ -992,6 +1012,8 @@ static void gpio_v2_line_config_flags_to_desc_flags(u64 flags,
assign_bit(FLAG_EVENT_CLOCK_REALTIME, flagsp,
flags & GPIO_V2_LINE_FLAG_EVENT_CLOCK_REALTIME);
+ assign_bit(FLAG_EVENT_CLOCK_HARDWARE, flagsp,
+ flags & GPIO_V2_LINE_FLAG_EVENT_CLOCK_HARDWARE);
}
static long linereq_get_values(struct linereq *lr, void __user *ip)
@@ -1139,6 +1161,18 @@ static long linereq_set_config_unlocked(struct linereq *lr,
int val = gpio_v2_line_config_output_value(lc, i);
edge_detector_stop(&lr->lines[i]);
+
+ /*
+ * Assuming line was input before and hardware
+ * assisted timestamp only timestamps the input
+ * lines.
+ */
+ if (gpiod_is_hw_timestamp_enabled(desc)) {
+ ret = gpiod_hw_timestamp_control(desc, false);
+ if (ret)
+ return ret;
+ }
+
ret = gpiod_direction_output(desc, val);
if (ret)
return ret;
@@ -1152,6 +1186,13 @@ static long linereq_set_config_unlocked(struct linereq *lr,
polarity_change);
if (ret)
return ret;
+
+ /* Check if new config sets hardware assisted clock */
+ if (flags & GPIO_V2_LINE_FLAG_EVENT_CLOCK_HARDWARE) {
+ ret = gpiod_hw_timestamp_control(desc, true);
+ if (ret)
+ return ret;
+ }
}
blocking_notifier_call_chain(&desc->gdev->notifier,
@@ -1281,8 +1322,12 @@ static void linereq_free(struct linereq *lr)
for (i = 0; i < lr->num_lines; i++) {
edge_detector_stop(&lr->lines[i]);
- if (lr->lines[i].desc)
+ if (lr->lines[i].desc) {
+ if (gpiod_is_hw_timestamp_enabled(lr->lines[i].desc))
+ gpiod_hw_timestamp_control(lr->lines[i].desc,
+ false);
gpiod_free(lr->lines[i].desc);
+ }
}
kfifo_free(&lr->events);
kfree(lr->label);
@@ -1409,6 +1454,15 @@ static int linereq_create(struct gpio_device *gdev, void __user *ip)
flags & GPIO_V2_LINE_EDGE_FLAGS);
if (ret)
goto out_free_linereq;
+
+ /*
+ * Check if hardware assisted timestamp is requested
+ */
+ if (flags & GPIO_V2_LINE_FLAG_EVENT_CLOCK_HARDWARE) {
+ ret = gpiod_hw_timestamp_control(desc, true);
+ if (ret)
+ goto out_free_linereq;
+ }
}
blocking_notifier_call_chain(&desc->gdev->notifier,
@@ -1956,8 +2010,15 @@ static void gpio_desc_to_lineinfo(struct gpio_desc *desc,
if (test_bit(FLAG_EDGE_FALLING, &desc->flags))
info->flags |= GPIO_V2_LINE_FLAG_EDGE_FALLING;
+ /*
+ * Practically it is possible that user will want both the real time
+ * and hardware timestamps on GPIO events, for now however lets just
+ * work with either clocks
+ */
if (test_bit(FLAG_EVENT_CLOCK_REALTIME, &desc->flags))
info->flags |= GPIO_V2_LINE_FLAG_EVENT_CLOCK_REALTIME;
+ else if (test_bit(FLAG_EVENT_CLOCK_HARDWARE, &desc->flags))
+ info->flags |= GPIO_V2_LINE_FLAG_EVENT_CLOCK_HARDWARE;
debounce_period_us = READ_ONCE(desc->debounce_period_us);
if (debounce_period_us) {
diff --git a/include/uapi/linux/gpio.h b/include/uapi/linux/gpio.h
index eaaea3d8e6b4..d360545b4c21 100644
--- a/include/uapi/linux/gpio.h
+++ b/include/uapi/linux/gpio.h
@@ -80,6 +80,7 @@ enum gpio_v2_line_flag {
GPIO_V2_LINE_FLAG_BIAS_PULL_DOWN = _BITULL(9),
GPIO_V2_LINE_FLAG_BIAS_DISABLED = _BITULL(10),
GPIO_V2_LINE_FLAG_EVENT_CLOCK_REALTIME = _BITULL(11),
+ GPIO_V2_LINE_FLAG_EVENT_CLOCK_HARDWARE = _BITULL(12),
};
/**
--
2.17.1
Powered by blists - more mailing lists