Message-ID: <20210625121817.77643fe0@ktm>
Date:   Fri, 25 Jun 2021 12:18:17 +0200
From:   Lukasz Majewski <lukma@...x.de>
To:     Joakim Zhang <qiangqing.zhang@....com>,
        Florian Fainelli <f.fainelli@...il.com>,
        Andrew Lunn <andrew@...n.ch>
Cc:     "David S . Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>,
        "Madalin Bucur (OSS)" <madalin.bucur@....nxp.com>,
        Nicolas Ferre <nicolas.ferre@...rochip.com>,
        Vladimir Oltean <olteanv@...il.com>,
        "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
        Arnd Bergmann <arnd@...db.de>,
        Mark Einon <mark.einon@...il.com>,
        dl-linux-imx <linux-imx@....com>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [RFC 1/3] ARM: dts: imx28: Add description for L2 switch on XEA
 board

Hi Joakim, Andrew,

> Hi Lukasz,
> 
> > -----Original Message-----
> > From: Lukasz Majewski <lukma@...x.de>
> > Sent: 2021年6月24日 19:21
> > To: Joakim Zhang <qiangqing.zhang@....com>; Florian Fainelli
> > <f.fainelli@...il.com>; Andrew Lunn <andrew@...n.ch>
> > Cc: David S . Miller <davem@...emloft.net>; Jakub Kicinski
> > <kuba@...nel.org>; Madalin Bucur (OSS) <madalin.bucur@....nxp.com>;
> > Nicolas Ferre <nicolas.ferre@...rochip.com>; Vladimir Oltean
> > <olteanv@...il.com>; netdev@...r.kernel.org; Arnd Bergmann
> > <arnd@...db.de>; Mark Einon <mark.einon@...il.com>; dl-linux-imx
> > <linux-imx@....com>; linux-kernel@...r.kernel.org
> > Subject: Re: [RFC 1/3] ARM: dts: imx28: Add description for L2
> > switch on XEA board
> > 
> > Hi Joakim,
> >   
> > > Hi Lukasz, Florian, Andrew,
> > >  
> > > > > Maybe somebody from NXP can provide input to this discussion
> > > > > - for example to sched some light on FEC driver (near)
> > > > > future.  
> > > >
> > > > Seems like some folks at NXP are focusing on the STMMAC
> > > > controller these days (dwmac from Synopsys), so maybe they have
> > > > given up on having their own Ethernet MAC for lower end
> > > > products.  
> > >
> > > I am very happy to take participate into this topic, but now I
> > > have no experience to DSA and i.MX28 MAC, so I may need some time
> > > to increase these knowledge, limited insight could be put to now.
> > >  
> > 
> > Ok. No problem :-)
> >   
> > >
> > > Florian, Andrew could comment more and I also can learn from it
> > > :-), they are all very experienced expert.  
> > 
> > The main purpose of several RFCs for the L2 switch drivers (for DSA
> > [1] and switchdev [2]) was to gain feedback from community as soon
> > as possible (despite that the driver lacks some features - like
> > VLAN, FDB, etc). 
> > >
> > > We also want to maintain FEC driver since many SoCs implemented
> > > this IP, and as I know we would also use it for future SoCs.
> > >  
> > 
> > Florian, Andrew, please correct me if I'm wrong, but my impression
> > is that upstreaming the support for L2 switch on iMX depends on FEC
> > driver being rewritten to support switchdev?
> > 
> > If yes, then unfortunately, I don't have time and resources to
> > perform that task
> > - that is why I have asked if NXP has any plans to update the FEC
> > (fec_main.c) driver.
> > 
> > 
> > Joakim, do you have any plans to re-factor the legacy FEC driver
> > (fec_main.c) and introduce new one, which would support the
> > switchdev?
> > 
> > If NXP is not planning to update the driver, then maybe it would be
> > worth to consider adding driver from [2] to mainline? Then I could
> > finish it and provide all required features.  
> 
> I don't have such plan now, and have no confidence to re-factor the
> legacy FEC driver and introduce new one, which to support switchdev
> in a short time. 

Thanks for the clear statement, appreciated.

> I am not very experienced for FEC driver, since I
> have just maintained it for half a year. 

Ok. No problem.

> To be honest, I have no idea
> in my head right now, we even don't have i.MX28 boards.

As fair as I remember there is still imx28-dev board available for
purchase. You can also use vf610 based board.

> I'm so sorry
> about this, but I am also interested in it, I am finding time to
> increase related knowledge.

Ok.

To sum up:

- The FEC driver (legacy one) will not be rewritten anytime soon
  (maybe any other community member will work on this sooner...)

- Considering the above, support for L2 switch on imx28, vf610 is
  blocked [*]. As a result some essential functionality for still
  actively used SoCs is going to be maintained out of tree (for example
  [1][2]). 

[*] - as I've stated in the other mail - what's about the situation
where FEC legacy driver is not going to be excessively modified (just
changes from this patch set)?

Links:

[1] -
https://source.denx.de/linux/linux-imx28-l2switch/-/commits/imx28-v5.12-L2-upstream-switchdev-RFC_v1

[2] -
https://source.denx.de/linux/linux-imx28-l2switch/-/commits/imx28-v5.12-L2-upstream-DSA-RFC_v1

> 
> Best Regards,
> Joakim Zhang
> > 
> > Links:
> > [1] -
> > https://source.denx.de/linux/linux-imx28-l2switch/-/commits/imx28-v5.12-L2-u
> > pstream-DSA-RFC_v1
> > [2] -
> > https://source.denx.de/linux/linux-imx28-l2switch/-/commits/imx28-v5.12-L2-u
> > pstream-switchdev-RFC_v1
> >   
> > > Best Regards,
> > > Joakim Zhang  
> > 
> > 
> > 
> > 
> > Best regards,
> > 
> > Lukasz Majewski
> > 
> > --
> > 
> > DENX Software Engineering GmbH,      Managing Director: Wolfgang
> > Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell,
> > Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email:
> > lukma@...x.de  


Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@...x.de

Content of type "application/pgp-signature" skipped

Powered by blists - more mailing lists