| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210628035402.16812-3-djw@t-chip.com.cn>
Date: Mon, 28 Jun 2021 11:54:02 +0800
From: djw@...hip.com.cn
To: linux-rockchip@...ts.infradead.org
Cc: Wayne Chou <zxf@...hip.com.cn>, Kongxin Deng <dkx@...hip.com.cn>,
Levin Du <djw@...hip.com.cn>, Heiko Stuebner <heiko@...ech.de>,
Chen-Yu Tsai <wens@...e.org>,
Jagan Teki <jagan@...rulasolutions.com>,
Jensen Huang <jensenhuang@...endlyarm.com>,
Johan Jonker <jbx6244@...il.com>,
Liang Chen <cl@...k-chips.com>,
Marty Jones <mj8263788@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Uwe Kleine-König <uwe@...ine-koenig.org>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v0 2/2] arm64: dts: rockchip: add support for Firefly ROC-RK3399-PC-PLUS
From: Levin Du <djw@...hip.com.cn>
ROC-RK3399-PC-PLUS is the board inside the portable Firefly Station P1 Geek
PC. As a redesign after the ROC-RK3399-PC, it uses DC-12V as power input
and spares a USB 3 host port. It is also equipped with a USB WiFi chip and
audio codec without the mezzanine board.
- Rockchip RK3399 SoC
- 4GB LPDDR4 RAM
- 16MB SPI-Flash
- eMMC slot
- TF card slot
- USB 3.0 Port x 1, USB 2.0 Port x 1, TypeC Port x 1
- HDMI
- Gigabit Ethernet
- WiFi: RTL8723DU
- Audio: ES8388
- Key: Recovery
- LED: WORK, DIY
- IR
Signed-off-by: Kongxin Deng <dkx@...hip.com.cn>
Signed-off-by: Levin Du <djw@...hip.com.cn>
---
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../boot/dts/rockchip/rk3399-roc-pc-plus.dts | 223 ++++++++++++++++++
2 files changed, 224 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 7fdb41de01ec..d6ab171b2522 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -42,6 +42,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-pinebook-pro.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezzanine.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-plus.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4a.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4b.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4c.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts
new file mode 100644
index 000000000000..370e8bf1b40c
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts
@@ -0,1 +1,223 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
+ */
+
+/dts-v1/;
+#include "rk3399-roc-pc.dtsi"
+
+/**
+ * Notice:
+ * 1. rk3399-roc-pc-plus is powered by dc_12v directly.
+ * 2. rk3399-roc-pc-plus has only vcc_bus_typec0 in schematic, which is coresponding
+ * to vcc_vbus_typec1 in rk3399-roc-pc.
+ * For simplicity, reserve the node name of vcc_vbus_typec1.
+ * 3. vcc5v0_host is actually 2 regulators (host0, 1) controlled by the same gpio.
+ */
+
+/delete-node/ &fusb1;
+/delete-node/ &hub_rst;
+/delete-node/ &mp8859;
+/delete-node/ &vcc_sys_en;
+/delete-node/ &vcc_vbus_typec0;
+/delete-node/ &yellow_led;
+
+/ {
+ model = "Firefly ROC-RK3399-PC-PLUS Board";
+ compatible = "firefly,roc-rk3399-pc-plus", "rockchip,rk3399";
+
+ dc_12v: dc-12v {
+ compatible = "regulator-fixed";
+ regulator-name = "dc_12v";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ gpio-fan {
+ #cooling-cells = <2>;
+ compatible = "gpio-fan";
+ gpio-fan,speed-map = <0 0 3000 1>;
+ gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+
+ /delete-node/ gpio-keys;
+
+ leds {
+ pinctrl-names = "default";
+ pinctrl-0 = <&work_led_pin>, <&diy_led_pin>;
+ };
+
+ es8388-sound {
+ compatible = "simple-audio-card";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hp_det_pin>;
+ simple-audio-card,name = "rockchip,es8388-codec";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,mclk-fs = <256>;
+
+ simple-audio-card,widgets =
+ "Microphone", "Mic Jack",
+ "Headphone", "Headphones";
+ simple-audio-card,routing =
+ "LINPUT1", "Mic Jack",
+ "Headphone Amp INL", "LOUT2",
+ "Headphone Amp INR", "ROUT2",
+ "Headphones", "Headphone Amp OUTL",
+ "Headphones", "Headphone Amp OUTR";
+
+ simple-audio-card,hp-det-gpio = <&gpio2 RK_PA6 GPIO_ACTIVE_HIGH>;
+ simple-audio-card,aux-devs = <&headphones_amp>;
+ simple-audio-card,pin-switches = "Headphones";
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s1>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&es8388>;
+ };
+ };
+
+ /* not amplifier, used as switcher only */
+ headphones_amp: headphones-amp {
+ compatible = "simple-audio-amplifier";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ear_ctl_pin>;
+ enable-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+ sound-name-prefix = "Headphone Amp";
+ VCC-supply = <&vcca3v0_codec>;
+ };
+
+ ir-receiver {
+ linux,rc-map-name = "rc-khadas";
+ };
+
+};
+
+&fusb0 {
+ vbus-supply = <&vcc_vbus_typec1>;
+};
+
+&i2c0 {
+ hym8563: hym8563@51 {
+ compatible = "haoyu,hym8563";
+ reg = <0x51>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "xin32k";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hym8563_int>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA5 IRQ_TYPE_EDGE_FALLING>;
+ };
+};
+
+&i2c1 {
+ es8388: es8388@11 {
+ compatible = "everest,es8388";
+ reg = <0x11>;
+ clock-names = "mclk";
+ clocks = <&cru SCLK_I2S_8CH_OUT>;
+ #sound-dai-cells = <0>;
+ status = "okay";
+ };
+};
+
+// <4 RK_PA0 1 &pcfg_pull_none> is used as i2s_8ch_mclk_pin
+&i2s0_8ch_bus {
+ rockchip,pins =
+ <3 RK_PD0 1 &pcfg_pull_none>,
+ <3 RK_PD1 1 &pcfg_pull_none>,
+ <3 RK_PD2 1 &pcfg_pull_none>,
+ <3 RK_PD3 1 &pcfg_pull_none>,
+ <3 RK_PD4 1 &pcfg_pull_none>,
+ <3 RK_PD5 1 &pcfg_pull_none>,
+ <3 RK_PD6 1 &pcfg_pull_none>,
+ <3 RK_PD7 1 &pcfg_pull_none>;
+};
+
+&i2s1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s_8ch_mclk_pin>, <&i2s1_2ch_bus>;
+ rockchip,playback-channels = <2>;
+ rockchip,capture-channels = <2>;
+ status = "okay";
+};
+
+&pinctrl {
+ es8388 {
+ ear_ctl_pin: ear-ctl-pin {
+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_output_high>;
+ };
+
+ hp_det_pin: hp-det-pin {
+ rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ hym8563 {
+ hym8563_int: hym8563-int {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ i2s1 {
+ i2s_8ch_mclk_pin: i2s-8ch-mclk-pin {
+ rockchip,pins = <4 RK_PA0 1 &pcfg_pull_none>;
+ };
+ };
+};
+
+&u2phy0 {
+ status = "okay";
+
+ u2phy0_otg: otg-port {
+ phy-supply = <&vcc_vbus_typec1>;
+ status = "okay";
+ };
+
+ u2phy0_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+};
+
+&u2phy1 {
+ status = "okay";
+
+ u2phy1_otg: otg-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+
+ u2phy1_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+ status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&vcc_sys {
+ // vcc_sys is fixed, not controlled by any gpio
+ /delete-property/ gpio;
+ /delete-property/ pinctrl-names;
+ /delete-property/ pinctrl-0;
+};
+
+&vcc5v0_host {
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_host_en>;
+};
--
2.23.0.37.g745f6812895b
Powered by blists - more mailing lists