| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210629045902.48912-1-m.shams@samsung.com>
Date: Tue, 29 Jun 2021 10:29:02 +0530
From: Tamseel Shams <m.shams@...sung.com>
To: krzysztof.kozlowski@...onical.com, gregkh@...uxfoundation.org,
jirislaby@...nel.org
Cc: linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, linux-serial@...r.kernel.org,
linux-kernel@...r.kernel.org, alim.akhtar@...sung.com,
ajaykumar.rs@...sung.com, robin.murphy@....com,
Tamseel Shams <m.shams@...sung.com>
Subject: [PATCH v5] serial: samsung: use dma_ops of DMA if attached
When DMA is used for TX and RX by serial driver, it should
pass the DMA device pointer to DMA API instead of UART device
pointer. DMA device should be used for DMA API because only
the DMA device is aware of how the device connects to the memory.
There might be an extra level of address translation due to a
SMMU attached to the DMA device. When serial device is used for
DMA API, the DMA API will have no clue of the SMMU attached to
the DMA device.
This patch is necessary to fix the SMMU page faults
which is observed when a DMA(with SMMU enabled) is attached
to UART for transfer.
Signed-off-by: Tamseel Shams <m.shams@...sung.com>
Signed-off-by: Ajay Kumar <ajaykumar.rs@...sung.com>
---
Changes since v1:
1. Rebased the patch on "tty-next" branch of TTY driver tree
Changes since v2:
1. Updated the commit message.
2. Changed the comment description
Changes since v3:
1. Removed the null pointer check for "dma", "dma->tx_chan" and
"dma->rx_chan" and instead sending DMA device pointer while calling
DMA API.
Changes since v4:
1. Fixed the alignments of arguments.
drivers/tty/serial/samsung_tty.c | 46 +++++++++++++++++---------------
1 file changed, 25 insertions(+), 21 deletions(-)
diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index 9fbc61151c2e..0cf4dfe77c32 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -305,8 +305,9 @@ static void s3c24xx_serial_stop_tx(struct uart_port *port)
dmaengine_pause(dma->tx_chan);
dmaengine_tx_status(dma->tx_chan, dma->tx_cookie, &state);
dmaengine_terminate_all(dma->tx_chan);
- dma_sync_single_for_cpu(ourport->port.dev,
- dma->tx_transfer_addr, dma->tx_size, DMA_TO_DEVICE);
+ dma_sync_single_for_cpu(dma->tx_chan->device->dev,
+ dma->tx_transfer_addr, dma->tx_size,
+ DMA_TO_DEVICE);
async_tx_ack(dma->tx_desc);
count = dma->tx_bytes_requested - state.residue;
xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1);
@@ -338,8 +339,9 @@ static void s3c24xx_serial_tx_dma_complete(void *args)
count = dma->tx_bytes_requested - state.residue;
async_tx_ack(dma->tx_desc);
- dma_sync_single_for_cpu(ourport->port.dev, dma->tx_transfer_addr,
- dma->tx_size, DMA_TO_DEVICE);
+ dma_sync_single_for_cpu(dma->tx_chan->device->dev,
+ dma->tx_transfer_addr, dma->tx_size,
+ DMA_TO_DEVICE);
spin_lock_irqsave(&port->lock, flags);
@@ -443,8 +445,9 @@ static int s3c24xx_serial_start_tx_dma(struct s3c24xx_uart_port *ourport,
dma->tx_size = count & ~(dma_get_cache_alignment() - 1);
dma->tx_transfer_addr = dma->tx_addr + xmit->tail;
- dma_sync_single_for_device(ourport->port.dev, dma->tx_transfer_addr,
- dma->tx_size, DMA_TO_DEVICE);
+ dma_sync_single_for_device(dma->tx_chan->device->dev,
+ dma->tx_transfer_addr, dma->tx_size,
+ DMA_TO_DEVICE);
dma->tx_desc = dmaengine_prep_slave_single(dma->tx_chan,
dma->tx_transfer_addr, dma->tx_size,
@@ -515,7 +518,7 @@ static void s3c24xx_uart_copy_rx_to_tty(struct s3c24xx_uart_port *ourport,
if (!count)
return;
- dma_sync_single_for_cpu(ourport->port.dev, dma->rx_addr,
+ dma_sync_single_for_cpu(dma->rx_chan->device->dev, dma->rx_addr,
dma->rx_size, DMA_FROM_DEVICE);
ourport->port.icount.rx += count;
@@ -636,8 +639,8 @@ static void s3c64xx_start_rx_dma(struct s3c24xx_uart_port *ourport)
{
struct s3c24xx_uart_dma *dma = ourport->dma;
- dma_sync_single_for_device(ourport->port.dev, dma->rx_addr,
- dma->rx_size, DMA_FROM_DEVICE);
+ dma_sync_single_for_device(dma->rx_chan->device->dev, dma->rx_addr,
+ dma->rx_size, DMA_FROM_DEVICE);
dma->rx_desc = dmaengine_prep_slave_single(dma->rx_chan,
dma->rx_addr, dma->rx_size, DMA_DEV_TO_MEM,
@@ -1102,18 +1105,19 @@ static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p)
goto err_release_tx;
}
- dma->rx_addr = dma_map_single(p->port.dev, dma->rx_buf,
- dma->rx_size, DMA_FROM_DEVICE);
- if (dma_mapping_error(p->port.dev, dma->rx_addr)) {
+ dma->rx_addr = dma_map_single(dma->rx_chan->device->dev, dma->rx_buf,
+ dma->rx_size, DMA_FROM_DEVICE);
+ if (dma_mapping_error(dma->rx_chan->device->dev, dma->rx_addr)) {
reason = "DMA mapping error for RX buffer";
ret = -EIO;
goto err_free_rx;
}
/* TX buffer */
- dma->tx_addr = dma_map_single(p->port.dev, p->port.state->xmit.buf,
- UART_XMIT_SIZE, DMA_TO_DEVICE);
- if (dma_mapping_error(p->port.dev, dma->tx_addr)) {
+ dma->tx_addr = dma_map_single(dma->tx_chan->device->dev,
+ p->port.state->xmit.buf, UART_XMIT_SIZE,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(dma->tx_chan->device->dev, dma->tx_addr)) {
reason = "DMA mapping error for TX buffer";
ret = -EIO;
goto err_unmap_rx;
@@ -1122,8 +1126,8 @@ static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p)
return 0;
err_unmap_rx:
- dma_unmap_single(p->port.dev, dma->rx_addr, dma->rx_size,
- DMA_FROM_DEVICE);
+ dma_unmap_single(dma->rx_chan->device->dev, dma->rx_addr,
+ dma->rx_size, DMA_FROM_DEVICE);
err_free_rx:
kfree(dma->rx_buf);
err_release_tx:
@@ -1142,8 +1146,8 @@ static void s3c24xx_serial_release_dma(struct s3c24xx_uart_port *p)
if (dma->rx_chan) {
dmaengine_terminate_all(dma->rx_chan);
- dma_unmap_single(p->port.dev, dma->rx_addr,
- dma->rx_size, DMA_FROM_DEVICE);
+ dma_unmap_single(dma->rx_chan->device->dev, dma->rx_addr,
+ dma->rx_size, DMA_FROM_DEVICE);
kfree(dma->rx_buf);
dma_release_channel(dma->rx_chan);
dma->rx_chan = NULL;
@@ -1151,8 +1155,8 @@ static void s3c24xx_serial_release_dma(struct s3c24xx_uart_port *p)
if (dma->tx_chan) {
dmaengine_terminate_all(dma->tx_chan);
- dma_unmap_single(p->port.dev, dma->tx_addr,
- UART_XMIT_SIZE, DMA_TO_DEVICE);
+ dma_unmap_single(dma->tx_chan->device->dev, dma->tx_addr,
+ UART_XMIT_SIZE, DMA_TO_DEVICE);
dma_release_channel(dma->tx_chan);
dma->tx_chan = NULL;
}
--
2.17.1
Powered by blists - more mailing lists