linux-kernel - [PATCH][next] clk: lmk04832: Fix spelling mistakes in dev

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20210629102956.17901-1-colin.king@canonical.com>
Date:   Tue, 29 Jun 2021 11:29:56 +0100
From:   Colin King <colin.king@...onical.com>
To:     Michael Turquette <mturquette@...libre.com>,
        Stephen Boyd <sboyd@...nel.org>, linux-clk@...r.kernel.org
Cc:     kernel-janitors@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH][next] clk: lmk04832: Fix spelling mistakes in dev_err messages and comments

From: Colin Ian King <colin.king@...onical.com>

There are handful of spelling mistakes in two dev_err error messages
and comments. Fix them.

Signed-off-by: Colin Ian King <colin.king@...onical.com>
---
 drivers/clk/clk-lmk04832.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/clk-lmk04832.c b/drivers/clk/clk-lmk04832.c
index 0cd76e626c3d..274c1004e938 100644
--- a/drivers/clk/clk-lmk04832.c
+++ b/drivers/clk/clk-lmk04832.c
@@ -519,7 +519,7 @@ static long lmk04832_vco_round_rate(struct clk_hw *hw, unsigned long rate,
 
 	vco_rate = lmk04832_calc_pll2_params(*prate, rate, &n, &p, &r);
 	if (vco_rate < 0) {
-		dev_err(lmk->dev, "PLL2 parmeters out of range\n");
+		dev_err(lmk->dev, "PLL2 parameters out of range\n");
 		return vco_rate;
 	}
 
@@ -550,7 +550,7 @@ static int lmk04832_vco_set_rate(struct clk_hw *hw, unsigned long rate,
 
 	vco_rate = lmk04832_calc_pll2_params(prate, rate, &n, &p, &r);
 	if (vco_rate < 0) {
-		dev_err(lmk->dev, "failed to determine PLL2 parmeters\n");
+		dev_err(lmk->dev, "failed to determine PLL2 parameters\n");
 		return vco_rate;
 	}
 
@@ -573,7 +573,7 @@ static int lmk04832_vco_set_rate(struct clk_hw *hw, unsigned long rate,
 
 	/*
 	 * PLL2_N registers must be programmed after other PLL2 dividers are
-	 * programed to ensure proper VCO frequency calibration
+	 * programmed to ensure proper VCO frequency calibration
 	 */
 	ret = regmap_write(lmk->regmap, LMK04832_REG_PLL2_N_0,
 			   FIELD_GET(0x030000, n));
@@ -1120,7 +1120,7 @@ static int lmk04832_dclk_set_rate(struct clk_hw *hw, unsigned long rate,
 		return -EINVAL;
 	}
 
-	/* Enable Duty Cycle Corretion */
+	/* Enable Duty Cycle Correction */
 	if (dclk_div == 1) {
 		ret = regmap_update_bits(lmk->regmap,
 					 LMK04832_REG_CLKOUT_CTRL3(dclk->id),
-- 
2.31.1