linux-kernel - [PATCH v8 6/8] PCI: Setup ACPI fwnode early and at the same time with OF

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20210629160104.2893-7-ameynarkhede03@gmail.com>
Date:   Tue, 29 Jun 2021 21:31:02 +0530
From:   Amey Narkhede <ameynarkhede03@...il.com>
To:     Bjorn Helgaas <bhelgaas@...gle.com>
Cc:     alex.williamson@...hat.com,
        Raphael Norwitz <raphael.norwitz@...anix.com>,
        linux-pci@...r.kernel.org, linux-kernel@...r.kernel.org,
        kw@...ux.com, Shanker Donthineni <sdonthineni@...dia.com>,
        Sinan Kaya <okaya@...nel.org>, Len Brown <lenb@...nel.org>,
        "Rafael J . Wysocki" <rjw@...ysocki.net>
Subject: [PATCH v8 6/8] PCI: Setup ACPI fwnode early and at the same time with OF

From: Shanker Donthineni <sdonthineni@...dia.com>

The pci_dev objects are created through two mechanisms 1) during PCI
bus scan and 2) from I/O Virtualization. The fwnode in pci_dev object
is being set at different places depends on the type of firmware used,
device creation mechanism, and acpi_pci_bridge_d3() WAR.

The software features which have a dependency on ACPI fwnode properties
and need to be handled before device_add() will not work. One use case,
the software has to check the existence of _RST method to support ACPI
based reset method.

This patch does the two changes in order to provide fwnode consistently.
 - Set ACPI and OF fwnodes from pci_setup_device().
 - Remove pci_set_acpi_fwnode() in acpi_pci_bridge_d3().

After this patch, ACPI/OF firmware properties are visible at the same
time during the early stage of pci_dev setup. And also call sites should
be able to use firmware agnostic functions device_property_xxx() for the
early PCI quirks in the future.

Signed-off-by: Shanker Donthineni <sdonthineni@...dia.com>
---
 drivers/pci/pci-acpi.c | 1 -
 drivers/pci/probe.c    | 7 ++++---
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index eaddbf701..dae021322 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -952,7 +952,6 @@ static bool acpi_pci_bridge_d3(struct pci_dev *dev)
 		return false;
 
 	/* Assume D3 support if the bridge is power-manageable by ACPI. */
-	pci_set_acpi_fwnode(dev);
 	adev = ACPI_COMPANION(&dev->dev);
 
 	if (adev && acpi_device_power_manageable(adev))
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 750ba53fb..9f0f2e5fb 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1790,6 +1790,9 @@ int pci_setup_device(struct pci_dev *dev)
 	dev->error_state = pci_channel_io_normal;
 	set_pcie_port_type(dev);
 
+	pci_set_of_node(dev);
+	pci_set_acpi_fwnode(dev);
+
 	pci_dev_assign_slot(dev);
 
 	/*
@@ -1925,6 +1928,7 @@ int pci_setup_device(struct pci_dev *dev)
 	default:				    /* unknown header */
 		pci_err(dev, "unknown header type %02x, ignoring device\n",
 			dev->hdr_type);
+		pci_release_of_node(dev);
 		return -EIO;
 
 	bad:
@@ -2352,10 +2356,7 @@ static struct pci_dev *pci_scan_device(struct pci_bus *bus, int devfn)
 	dev->vendor = l & 0xffff;
 	dev->device = (l >> 16) & 0xffff;
 
-	pci_set_of_node(dev);
-
 	if (pci_setup_device(dev)) {
-		pci_release_of_node(dev);
 		pci_bus_put(dev->bus);
 		kfree(dev);
 		return NULL;
-- 
2.32.0