[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <YNqVgESqehz27knL@matsya>
Date: Tue, 29 Jun 2021 09:07:36 +0530
From: Vinod Koul <vkoul@...nel.org>
To: Doug Anderson <dianders@...omium.org>
Cc: Bjorn Andersson <bjorn.andersson@...aro.org>,
Mark Brown <broonie@...nel.org>, Wolfram Sang <wsa@...nel.org>,
Andy Gross <agross@...nel.org>,
Sumit Semwal <sumit.semwal@...aro.org>,
Matthias Kaehlcke <mka@...omium.org>,
linux-spi <linux-spi@...r.kernel.org>,
linux-i2c <linux-i2c@...r.kernel.org>,
linux-arm-msm <linux-arm-msm@...r.kernel.org>,
LKML <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v3 2/5] soc: qcom: geni: Add support for gpi dma
Hi Doug,
On 28-06-21, 16:38, Doug Anderson wrote:
> Hi,
>
> On Thu, Jun 24, 2021 at 10:22 PM Vinod Koul <vkoul@...nel.org> wrote:
> >
> > +static void geni_se_select_gpi_mode(struct geni_se *se)
> > +{
> > + u32 val;
> > +
> > + geni_se_irq_clear(se);
> > +
> > + writel(0, se->base + SE_IRQ_EN);
> > +
> > + val = readl(se->base + SE_GENI_S_IRQ_EN);
> > + val &= ~S_CMD_DONE_EN;
> > + writel(val, se->base + SE_GENI_S_IRQ_EN);
> > +
> > + val = readl(se->base + SE_GENI_M_IRQ_EN);
> > + val &= ~(M_CMD_DONE_EN | M_TX_FIFO_WATERMARK_EN |
> > + M_RX_FIFO_WATERMARK_EN | M_RX_FIFO_LAST_EN);
> > + writel(val, se->base + SE_GENI_M_IRQ_EN);
> > +
> > + writel(GENI_DMA_MODE_EN, se->base + SE_GENI_DMA_MODE_EN);
> > +
> > + val = readl(se->base + SE_GSI_EVENT_EN);
> > + val |= (DMA_RX_EVENT_EN | DMA_TX_EVENT_EN | GENI_M_EVENT_EN | GENI_S_EVENT_EN);
>
> nit: the above has some extra parenthesis that aren't needed.
>
> I will continue to assert that all of the "set mode" stuff doesn't
> really belong here and should be managed by individual drivers [1].
> I'll accept that it doesn't have to block forward progress, though I'm
> at least a bit disappointed that we asked Qualcomm to do this over 8
> months ago and no action was taken. :(
>
> In any case, this looks OK to me:
>
> Reviewed-by: Douglas Anderson <dianders@...omium.org>
Thanks for the review.
>
> [1] https://lore.kernel.org/r/CAD=FV=VWPqswOXJejyXjYT_Yspdu75ELq42cffN87FrpTwPUQg@mail.gmail.com/
I agree we should do something, will discuss with Bjorn and try to help
here.
Regards
--
~Vinod
Powered by blists - more mailing lists