| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <PH0PR03MB63663787FD770A037A8593B599019@PH0PR03MB6366.namprd03.prod.outlook.com>
Date: Wed, 30 Jun 2021 12:04:16 +0000
From: "Sa, Nuno" <Nuno.Sa@...log.com>
To: Alexandru Ardelean <ardeleanalex@...il.com>,
"Miclaus, Antoniu" <Antoniu.Miclaus@...log.com>
CC: linux-iio <linux-iio@...r.kernel.org>,
LKML <linux-kernel@...r.kernel.org>,
Jonathan Cameron <jic23@...nel.org>,
devicetree <devicetree@...r.kernel.org>,
Rob Herring <robh+dt@...nel.org>
Subject: RE: [PATCH 1/2] iio: frequency: adrf6780: add support for ADRF6780
Hey Alex,
Thanks for the review,
> From: Alexandru Ardelean <ardeleanalex@...il.com>
> Sent: Wednesday, June 30, 2021 10:38 AM
> To: Miclaus, Antoniu <Antoniu.Miclaus@...log.com>
> Cc: linux-iio <linux-iio@...r.kernel.org>; LKML <linux-
> kernel@...r.kernel.org>; Jonathan Cameron <jic23@...nel.org>;
> devicetree <devicetree@...r.kernel.org>; Rob Herring
> <robh+dt@...nel.org>
> Subject: Re: [PATCH 1/2] iio: frequency: adrf6780: add support for
> ADRF6780
>
> On Tue, Jun 29, 2021 at 5:25 PM Antoniu Miclaus
> <antoniu.miclaus@...log.com> wrote:
> >
> > Add support for the ADRF6780 microwave upconverter.
>
> Hey,
>
> A few comments inline.
> The description of the commit could have a bit more information.
> Maybe a short description of the chip (typically I'd adapt something
> from the datasheet).
> And maybe a link to the datasheet.
>
> >
> > Signed-off-by: Antoniu Miclaus <antoniu.miclaus@...log.com>
> > ---
> > drivers/iio/frequency/Kconfig | 13 +
> > drivers/iio/frequency/Makefile | 1 +
> > drivers/iio/frequency/adrf6780.c | 534
> +++++++++++++++++++++++++++++++
> > 3 files changed, 548 insertions(+)
> > create mode 100644 drivers/iio/frequency/adrf6780.c
> >
> > diff --git a/drivers/iio/frequency/Kconfig
> b/drivers/iio/frequency/Kconfig
> > index 240b81502512..fc9751c48f59 100644
> > --- a/drivers/iio/frequency/Kconfig
> > +++ b/drivers/iio/frequency/Kconfig
> > @@ -49,5 +49,18 @@ config ADF4371
> >
> > To compile this driver as a module, choose M here: the
> > module will be called adf4371.
> > +
> > +config ADRF6780
> > + tristate "Analog Devices ADRF6780 Microwave Upconverter"
> > + depends on SPI
> > + depends on COMMON_CLK
> > + depends on OF
> > + help
> > + Say yes here to build support for Analog Devices ADRF6780
> > + 5.9 GHz to 23.6 GHz, Wideband, Microwave Upconverter.
> > +
> > + To compile this driver as a module, choose M here: the
> > + module will be called adrf6780.
> > +
> > endmenu
> > endmenu
> > diff --git a/drivers/iio/frequency/Makefile
> b/drivers/iio/frequency/Makefile
> > index 518b1e50caef..ae3136c79202 100644
> > --- a/drivers/iio/frequency/Makefile
> > +++ b/drivers/iio/frequency/Makefile
> > @@ -7,3 +7,4 @@
> > obj-$(CONFIG_AD9523) += ad9523.o
> > obj-$(CONFIG_ADF4350) += adf4350.o
> > obj-$(CONFIG_ADF4371) += adf4371.o
> > +obj-$(CONFIG_ADRF6780) += adrf6780.o
> > diff --git a/drivers/iio/frequency/adrf6780.c
> b/drivers/iio/frequency/adrf6780.c
> > new file mode 100644
> > index 000000000000..c492c4e4adf1
> > --- /dev/null
> > +++ b/drivers/iio/frequency/adrf6780.c
> > @@ -0,0 +1,534 @@
> > +// SPDX-License-Identifier: GPL-2.0+
>
> about the licensing;
>
> SPDX-License-Identifier: GPL-2.0+ == MODULE_LICENSE("GPL v2");
> SPDX-License-Identifier: GPL-2.0 == MODULE_LICENSE("GPL v2");
>
> I usually don't care about this licensing details, but it seems to be
> important elsewhere.
>
> > +/*
> > + * ADRF6780 driver
>
> This could be "Analog Devices ADRF6780 driver"
>
> > + *
> > + * Copyright 2021 Analog Devices Inc.
> > + */
> > +
> > +#include <linux/bitfield.h>
> > +#include <linux/bits.h>
> > +#include <linux/clk.h>
> > +#include <linux/clkdev.h>
> > +#include <linux/clk-provider.h>
> > +#include <linux/delay.h>
> > +#include <linux/device.h>
> > +#include <linux/iio/iio.h>
> > +#include <linux/module.h>
> > +#include <linux/regmap.h>
> > +#include <linux/spi/spi.h>
>
> Not all these headers look used.
> For one thing, regmap.h doesn't look used at all.
> Maybe trim the list.
>
> > +
> > +/* ADRF6780 Register Map */
> > +#define ADRF6780_REG_CONTROL 0x00
> > +#define ADRF6780_REG_ALARM_READBACK 0x01
> > +#define ADRF6780_REG_ALARM_MASKS 0x02
> > +#define ADRF6780_REG_ENABLE 0x03
> > +#define ADRF6780_REG_LINEARIZE 0x04
> > +#define ADRF6780_REG_LO_PATH 0x05
> > +#define ADRF6780_REG_ADC_CONTROL 0x06
> > +#define ADRF6780_REG_ADC_OUTPUT 0x0C
> > +
> > +/* ADRF6780_REG_CONTROL Map */
> > +#define ADRF6780_PARITY_EN_MSK BIT(15)
> > +#define ADRF6780_PARITY_EN(x)
> FIELD_PREP(ADRF6780_PARITY_EN_MSK, x)
> > +#define ADRF6780_SOFT_RESET_MSK BIT(14)
> > +#define ADRF6780_SOFT_RESET(x)
> FIELD_PREP(ADRF6780_SOFT_RESET_MSK, x)
> > +#define ADRF6780_CHIP_ID_MSK GENMASK(11, 4)
> > +#define ADRF6780_CHIP_ID 0xA
> > +#define ADRF6780_CHIP_REVISION_MSK GENMASK(3, 0)
> > +#define ADRF6780_CHIP_REVISION(x)
> FIELD_PREP(ADRF6780_CHIP_REVISION_MSK, x)
> > +
> > +/* ADRF6780_REG_ALARM_READBACK Map */
> > +#define ADRF6780_PARITY_ERROR_MSK BIT(15)
> > +#define ADRF6780_PARITY_ERROR(x)
> FIELD_PREP(ADRF6780_PARITY_ERROR_MSK, x)
> > +#define ADRF6780_TOO_FEW_ERRORS_MSK BIT(14)
> > +#define ADRF6780_TOO_FEW_ERRORS(x)
> FIELD_PREP(ADRF6780_TOO_FEW_ERRORS_MSK, x)
> > +#define ADRF6780_TOO_MANY_ERRORS_MSK BIT(13)
> > +#define ADRF6780_TOO_MANY_ERRORS(x)
> FIELD_PREP(ADRF6780_TOO_MANY_ERRORS_MSK, x)
> > +#define ADRF6780_ADDRESS_RANGE_ERROR_MSK BIT(12)
> > +#define ADRF6780_ADDRESS_RANGE_ERROR(x)
> FIELD_PREP(ADRF6780_ADDRESS_RANGE_ERROR_MSK, x)
> > +
> > +/* ADRF6780_REG_ENABLE Map */
> > +#define ADRF6780_VGA_BUFFER_EN_MSK BIT(8)
> > +#define ADRF6780_VGA_BUFFER_EN(x)
> FIELD_PREP(ADRF6780_VGA_BUFFER_EN_MSK, x)
> > +#define ADRF6780_DETECTOR_EN_MSK BIT(7)
> > +#define ADRF6780_DETECTOR_EN(x)
> FIELD_PREP(ADRF6780_DETECTOR_EN_MSK, x)
> > +#define ADRF6780_LO_BUFFER_EN_MSK BIT(6)
> > +#define ADRF6780_LO_BUFFER_EN(x)
> FIELD_PREP(ADRF6780_LO_BUFFER_EN_MSK, x)
> > +#define ADRF6780_IF_MODE_EN_MSK BIT(5)
> > +#define ADRF6780_IF_MODE_EN(x)
> FIELD_PREP(ADRF6780_IF_MODE_EN_MSK, x)
> > +#define ADRF6780_IQ_MODE_EN_MSK BIT(4)
> > +#define ADRF6780_IQ_MODE_EN(x)
> FIELD_PREP(ADRF6780_IQ_MODE_EN_MSK, x)
> > +#define ADRF6780_LO_X2_EN_MSK BIT(3)
> > +#define ADRF6780_LO_X2_EN(x)
> FIELD_PREP(ADRF6780_LO_X2_EN_MSK, x)
> > +#define ADRF6780_LO_PPF_EN_MSK BIT(2)
> > +#define ADRF6780_LO_PPF_EN(x)
> FIELD_PREP(ADRF6780_LO_PPF_EN_MSK, x)
> > +#define ADRF6780_LO_EN_MSK BIT(1)
> > +#define ADRF6780_LO_EN(x)
> FIELD_PREP(ADRF6780_LO_EN_MSK, x)
> > +#define ADRF6780_UC_BIAS_EN_MSK BIT(0)
> > +#define ADRF6780_UC_BIAS_EN(x)
> FIELD_PREP(ADRF6780_UC_BIAS_EN_MSK, x)
> > +
> > +/* ADRF6780_REG_LINEARIZE Map */
> > +#define ADRF6780_RDAC_LINEARIZE_MSK GENMASK(7, 0)
> > +#define ADRF6780_RDAC_LINEARIZE(x)
> FIELD_PREP(ADRF6780_RDAC_LINEARIZE_MSK, x)
> > +
> > +/* ADRF6780_REG_LO_PATH Map */
> > +#define ADRF6780_LO_SIDEBAND_MSK BIT(10)
> > +#define ADRF6780_LO_SIDEBAND(x)
> FIELD_PREP(ADRF6780_LO_SIDEBAND_MSK, x)
> > +#define ADRF6780_Q_PATH_PHASE_ACCURACY_MSK
> GENMASK(7, 4)
> > +#define ADRF6780_Q_PATH_PHASE_ACCURACY(x)
> FIELD_PREP(ADRF6780_Q_PATH_PHASE_ACCURACY_MSK, x)
> > +#define ADRF6780_I_PATH_PHASE_ACCURACY_MSK
> GENMASK(3, 0)
> > +#define ADRF6780_I_PATH_PHASE_ACCURACY(x)
> FIELD_PREP(ADRF6780_I_PATH_PHASE_ACCURACY_MSK, x)
> > +
> > +/* ADRF6780_REG_ADC_CONTROL Map */
> > +#define ADRF6780_VDET_OUTPUT_SELECT_MSK BIT(3)
> > +#define ADRF6780_VDET_OUTPUT_SELECT(x)
> FIELD_PREP(ADRF6780_VDET_OUTPUT_SELECT_MSK, x)
> > +#define ADRF6780_ADC_START_MSK BIT(2)
> > +#define ADRF6780_ADC_START(x)
> FIELD_PREP(ADRF6780_ADC_START_MSK, x)
> > +#define ADRF6780_ADC_EN_MSK BIT(1)
> > +#define ADRF6780_ADC_EN(x)
> FIELD_PREP(ADRF6780_ADC_EN_MSK, x)
> > +#define ADRF6780_ADC_CLOCK_EN_MSK BIT(0)
> > +#define ADRF6780_ADC_CLOCK_EN(x)
> FIELD_PREP(ADRF6780_ADC_CLOCK_EN_MSK, x)
> > +
> > +/* ADRF6780_REG_ADC_OUTPUT Map */
> > +#define ADRF6780_ADC_STATUS_MSK BIT(8)
> > +#define ADRF6780_ADC_STATUS(x)
> FIELD_PREP(ADRF6780_ADC_STATUS_MSK, x)
> > +#define ADRF6780_ADC_VALUE_MSK GENMASK(7, 0)
> > +#define ADRF6780_ADC_VALUE(x)
> FIELD_PREP(ADRF6780_ADC_VALUE_MSK, x)
>
> The indentation for the bit-values doesn't look consistent in all places.
>
> > +
> > +enum supported_parts {
> > + ADRF6780,
> > +};
>
> This enum doesn't seem used anywhere
>
> > +
> > +struct adrf6780_dev {
> > + struct spi_device *spi;
> > + struct clk *clkin;
> > + /* Protect against concurrent accesses to the device */
> > + struct mutex lock;
> > + bool parity_en;
>
> Maybe remove this parity check.
> There are many drivers that support some form of simple error
> checking, but in the kernel this is typically left up to the SPI
> framework.
> So, I'd just disable the error checking entirely.
I would just argue here... Though parity check is not the most reliable one
out there, it does give some extra checking on top of what the SPI framework
can give (AFAICT). As this part might be used is some sensitive applications, I
can imagine someone wanting this extra feature that does not really cost that
much (if something). However it looks like that on the write side, the only way
to know about parity issues (or other errors) is to make use of ALM pin.
Anyways, I do agree that having this as a devicetree parameter is, at least, arguable
(I don't think it is terribly wrong though). But I guess that, at least, as a module
parameter would be something more acceptable.
Or, as you suggested, It can also be removed and only implemented if someone
really cares/asks for it...
- Nuno Sá
Powered by blists - more mailing lists