| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210630034653.10260-2-manivannan.sadhasivam@linaro.org>
Date: Wed, 30 Jun 2021 09:16:51 +0530
From: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To: kishon@...com, lorenzo.pieralisi@....com, bhelgaas@...gle.com,
robh@...nel.org
Cc: devicetree@...r.kernel.org, linux-pci@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
hemantk@...eaurora.org, smohanad@...eaurora.org,
bjorn.andersson@...aro.org, sallenki@...eaurora.org,
skananth@...eaurora.org, vpernami@...eaurora.org,
vbadigan@...eaurora.org,
Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
Subject: [PATCH v5 1/3] dt-bindings: pci: Add devicetree binding for Qualcomm PCIe EP controller
Add devicetree binding for Qualcomm PCIe EP controller used in platforms
like SDX55. The EP controller is based on the Designware core with
Qualcomm specific wrappers.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
---
.../devicetree/bindings/pci/qcom,pcie-ep.yaml | 160 ++++++++++++++++++
1 file changed, 160 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
new file mode 100644
index 000000000000..9110d33809cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
@@ -0,0 +1,160 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PCIe Endpoint Controller binding
+
+maintainers:
+ - Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
+
+allOf:
+ - $ref: "pci-ep.yaml#"
+
+properties:
+ compatible:
+ const: qcom,sdx55-pcie-ep
+
+ reg:
+ items:
+ - description: Qualcomm specific PARF configuration registers
+ - description: Designware PCIe registers
+ - description: External local bus interface registers
+ - description: Address Translation Unit (ATU) registers
+ - description: Memory region used to map remote RC address space
+ - description: BAR memory region
+
+ reg-names:
+ items:
+ - const: parf
+ - const: dbi
+ - const: elbi
+ - const: atu
+ - const: addr_space
+ - const: mmio
+
+ clocks:
+ items:
+ - description: PCIe Auxiliary clock
+ - description: PCIe CFG AHB clock
+ - description: PCIe Master AXI clock
+ - description: PCIe Slave AXI clock
+ - description: PCIe Slave Q2A AXI clock
+ - description: PCIe Sleep clock
+ - description: PCIe Reference clock
+
+ clock-names:
+ items:
+ - const: aux
+ - const: cfg
+ - const: bus_master
+ - const: bus_slave
+ - const: slave_q2a
+ - const: sleep
+ - const: ref
+
+ qcom,perst-regs:
+ description: Reference to a syscon representing TCSR followed by the two
+ offsets within syscon for Perst enable and Perst separation
+ enable registers
+ $ref: "/schemas/types.yaml#/definitions/phandle-array"
+ items:
+ minItems: 3
+ maxItems: 3
+
+ interrupts:
+ items:
+ - description: PCIe Global interrupt
+ - description: PCIe Doorbell interrupt
+
+ interrupt-names:
+ items:
+ - const: global
+ - const: doorbell
+
+ reset-gpios:
+ description: GPIO that is being used as PERST# input signal
+ maxItems: 1
+
+ wake-gpios:
+ description: GPIO that is being used as WAKE# output signal
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ const: core
+
+ power-domains:
+ maxItems: 1
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ const: pciephy
+
+ num-lanes:
+ default: 2
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+ - qcom,perst-regs
+ - interrupts
+ - interrupt-names
+ - reset-gpios
+ - resets
+ - reset-names
+ - power-domains
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-sdx55.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ pcie_ep: pcie-ep@...00000 {
+ compatible = "qcom,sdx55-pcie-ep";
+ reg = <0x01c00000 0x3000>,
+ <0x40000000 0xf1d>,
+ <0x40000f20 0xc8>,
+ <0x40001000 0x1000>,
+ <0x40002000 0x1000>,
+ <0x01c03000 0x3000>;
+ reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
+ "mmio";
+
+ clocks = <&gcc GCC_PCIE_AUX_CLK>,
+ <&gcc GCC_PCIE_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>,
+ <&gcc GCC_PCIE_SLEEP_CLK>,
+ <&gcc GCC_PCIE_0_CLKREF_CLK>;
+ clock-names = "aux", "cfg", "bus_master", "bus_slave",
+ "slave_q2a", "sleep", "ref";
+
+ qcom,perst-regs = <&tcsr 0xb258 0xb270>;
+
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global", "doorbell";
+ reset-gpios = <&tlmm 57 GPIO_ACTIVE_HIGH>;
+ wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
+ resets = <&gcc GCC_PCIE_BCR>;
+ reset-names = "core";
+ power-domains = <&gcc PCIE_GDSC>;
+ phys = <&pcie0_lane>;
+ phy-names = "pciephy";
+ max-link-speed = <3>;
+ num-lanes = <2>;
+
+ status = "disabled";
+ };
--
2.25.1
Powered by blists - more mailing lists