lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <YNzCVxmMtZ1Kc6XA@elver.google.com>
Date:   Wed, 30 Jun 2021 21:13:27 +0200
From:   Marco Elver <elver@...gle.com>
To:     yee.lee@...iatek.com
Cc:     andreyknvl@...il.com, wsd_upstream@...iatek.com,
        Andrey Ryabinin <ryabinin.a.a@...il.com>,
        Alexander Potapenko <glider@...gle.com>,
        Dmitry Vyukov <dvyukov@...gle.com>,
        Andrew Morton <akpm@...ux-foundation.org>,
        Matthias Brugger <matthias.bgg@...il.com>,
        "open list:KASAN" <kasan-dev@...glegroups.com>,
        "open list:MEMORY MANAGEMENT" <linux-mm@...ck.org>,
        open list <linux-kernel@...r.kernel.org>,
        "moderated list:ARM/Mediatek SoC support" 
        <linux-arm-kernel@...ts.infradead.org>,
        "moderated list:ARM/Mediatek SoC support" 
        <linux-mediatek@...ts.infradead.org>
Subject: Re: [PATCH v3 1/1] kasan: Add memzero init for unaligned size under
 SLUB debug

On Wed, Jun 30, 2021 at 09:49PM +0800, yee.lee@...iatek.com wrote:
> From: Yee Lee <yee.lee@...iatek.com>
> 
> Issue: when SLUB debug is on, hwtag kasan_unpoison() would overwrite
> the redzone of object with unaligned size.
> 
> An additional memzero_explicit() path is added to replacing init by
> hwtag instruction for those unaligned size at SLUB debug mode.
> 
> The penalty is acceptable since they are only enabled in debug mode,
> not production builds. A block of comment is added for explanation.
> 
> Signed-off-by: Yee Lee <yee.lee@...iatek.com>
> Suggested-by: Marco Elver <elver@...gle.com>
> Suggested-by: Andrey Konovalov <andreyknvl@...il.com>
> Cc: Andrey Ryabinin <ryabinin.a.a@...il.com>
> Cc: Alexander Potapenko <glider@...gle.com>
> Cc: Dmitry Vyukov <dvyukov@...gle.com>
> Cc: Andrew Morton <akpm@...ux-foundation.org>

In future, please add changes to each version after an additional '---'.
Example:

---
v2:
* Use IS_ENABLED(CONFIG_SLUB_DEBUG) in if-statement.

> ---
>  mm/kasan/kasan.h | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/mm/kasan/kasan.h b/mm/kasan/kasan.h
> index 8f450bc28045..6f698f13dbe6 100644
> --- a/mm/kasan/kasan.h
> +++ b/mm/kasan/kasan.h
> @@ -387,6 +387,16 @@ static inline void kasan_unpoison(const void *addr, size_t size, bool init)
>  
>  	if (WARN_ON((unsigned long)addr & KASAN_GRANULE_MASK))
>  		return;
> +	/*
> +	 * Explicitly initialize the memory with the precise object size
> +	 * to avoid overwriting the SLAB redzone. This disables initialization
> +	 * in the arch code and may thus lead to performance penalty.
> +	 * The penalty is accepted since SLAB redzones aren't enabled in production builds.
> +	 */

Can we please format the comment properly:

diff --git a/mm/kasan/kasan.h b/mm/kasan/kasan.h
index 6f698f13dbe6..1972ec5736cb 100644
--- a/mm/kasan/kasan.h
+++ b/mm/kasan/kasan.h
@@ -388,10 +388,10 @@ static inline void kasan_unpoison(const void *addr, size_t size, bool init)
 	if (WARN_ON((unsigned long)addr & KASAN_GRANULE_MASK))
 		return;
 	/*
-	 * Explicitly initialize the memory with the precise object size
-	 * to avoid overwriting the SLAB redzone. This disables initialization
-	 * in the arch code and may thus lead to performance penalty.
-	 * The penalty is accepted since SLAB redzones aren't enabled in production builds.
+	 * Explicitly initialize the memory with the precise object size to
+	 * avoid overwriting the SLAB redzone. This disables initialization in
+	 * the arch code and may thus lead to performance penalty. The penalty
+	 * is accepted since SLAB redzones aren't enabled in production builds.
 	 */
 	if (IS_ENABLED(CONFIG_SLUB_DEBUG) && init && ((unsigned long)size & KASAN_GRANULE_MASK)) {
 		init = false;

> +	if (IS_ENABLED(CONFIG_SLUB_DEBUG) && init && ((unsigned long)size & KASAN_GRANULE_MASK)) {
> +		init = false;
> +		memzero_explicit((void *)addr, size);
> +	}
>  	size = round_up(size, KASAN_GRANULE_SIZE);
>  
>  	hw_set_mem_tag_range((void *)addr, size, tag, init);

I think this solution might be fine for now, as I don't see an easy way
to do this without some major refactor to use kmem_cache_debug_flags().

However, I think there's an intermediate solution where we only check
the static-key 'slub_debug_enabled' though. Because I've checked, and
various major distros _do_ enabled CONFIG_SLUB_DEBUG. But the static
branch just makes sure there's no performance overhead.

Checking the static branch requires including mm/slab.h into
mm/kasan/kasan.h, which we currently don't do and perhaps wanted to
avoid. Although I don't see a reason there, because there's no circular
dependency even if we did.

Andrey, any opinion?

In case you guys think checking static key is the better solution, I
think the below would work together with the pre-requisite patch at the
end:

diff --git a/mm/kasan/kasan.h b/mm/kasan/kasan.h
index 1972ec5736cb..9130d025612c 100644
--- a/mm/kasan/kasan.h
+++ b/mm/kasan/kasan.h
@@ -6,6 +6,8 @@
 #include <linux/kfence.h>
 #include <linux/stackdepot.h>
 
+#include "../slab.h"
+
 #ifdef CONFIG_KASAN_HW_TAGS
 
 #include <linux/static_key.h>
@@ -393,7 +395,8 @@ static inline void kasan_unpoison(const void *addr, size_t size, bool init)
 	 * the arch code and may thus lead to performance penalty. The penalty
 	 * is accepted since SLAB redzones aren't enabled in production builds.
 	 */
-	if (IS_ENABLED(CONFIG_SLUB_DEBUG) && init && ((unsigned long)size & KASAN_GRANULE_MASK)) {
+	if (slub_debug_enabled_unlikely() &&
+	    init && ((unsigned long)size & KASAN_GRANULE_MASK)) {
 		init = false;
 		memzero_explicit((void *)addr, size);
 	}



[ Note: You can pick the below patch up by extracting it from the email
  and running 'git am -s <file>'. You could then use it as part of a patch
  series together with your original patch. ]

From: Marco Elver <elver@...gle.com>
Date: Wed, 30 Jun 2021 20:56:57 +0200
Subject: [PATCH] mm: introduce helper to check slub_debug_enabled

Introduce a helper to check slub_debug_enabled, so that we can confine
the use of #ifdef to the definition of the slub_debug_enabled_unlikely()
helper.

Signed-off-by: Marco Elver <elver@...gle.com>
---
 mm/slab.h | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/mm/slab.h b/mm/slab.h
index 18c1927cd196..9439da434712 100644
--- a/mm/slab.h
+++ b/mm/slab.h
@@ -215,10 +215,18 @@ DECLARE_STATIC_KEY_TRUE(slub_debug_enabled);
 DECLARE_STATIC_KEY_FALSE(slub_debug_enabled);
 #endif
 extern void print_tracking(struct kmem_cache *s, void *object);
+static inline bool slub_debug_enabled_unlikely(void)
+{
+	return static_branch_unlikely(&slub_debug_enabled);
+}
 #else
 static inline void print_tracking(struct kmem_cache *s, void *object)
 {
 }
+static inline bool slub_debug_enabled_unlikely(void)
+{
+	return false;
+}
 #endif
 
 /*
@@ -228,11 +236,10 @@ static inline void print_tracking(struct kmem_cache *s, void *object)
  */
 static inline bool kmem_cache_debug_flags(struct kmem_cache *s, slab_flags_t flags)
 {
-#ifdef CONFIG_SLUB_DEBUG
-	VM_WARN_ON_ONCE(!(flags & SLAB_DEBUG_FLAGS));
-	if (static_branch_unlikely(&slub_debug_enabled))
+	if (IS_ENABLED(CONFIG_SLUB_DEBUG))
+		VM_WARN_ON_ONCE(!(flags & SLAB_DEBUG_FLAGS));
+	if (slub_debug_enabled_unlikely())
 		return s->flags & flags;
-#endif
 	return false;
 }
 
-- 
2.32.0.93.g670b81a890-goog

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ