[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CACPK8XeRg5P8+W8kyxSNyOa7JBhua5QdP_oCVJALGPJQio0dhA@mail.gmail.com>
Date: Thu, 1 Jul 2021 03:12:07 +0000
From: Joel Stanley <joel@....id.au>
To: Zev Weiss <zev@...ilderbeest.net>
Cc: OpenBMC Maillist <openbmc@...ts.ozlabs.org>,
Rob Herring <robh+dt@...nel.org>,
Andrew Jeffery <andrew@...id.au>,
devicetree <devicetree@...r.kernel.org>,
Linux ARM <linux-arm-kernel@...ts.infradead.org>,
linux-aspeed <linux-aspeed@...ts.ozlabs.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] ARM: dts: aspeed: update e3c246d4i vuart properties
On Fri, 16 Apr 2021 at 07:52, Zev Weiss <zev@...ilderbeest.net> wrote:
>
> This device-tree was merged with a provisional vuart IRQ-polarity
> property that was still under review and ended up taking a somewhat
> different form. This patch updates it to match the final form of the
> new vuart properties, which additionally allow specifying the SIRQ
> number and LPC address.
>
> Signed-off-by: Zev Weiss <zev@...ilderbeest.net>
Fixes: ca03042f0f12 ("serial: 8250_aspeed_vuart: add aspeed,
lpc-io-reg and aspeed, lpc-interrupts DT properties")
Reviewed-by: Joel Stanley <joel@....id.au>
> ---
>
> The relevant aspeed-vuart patches [0] have been merged into Greg KH's
> tty-next tree, so I figure it's probably okay to proceed with the
> corresponding dts adjustments now.
>
> [0] https://lore.kernel.org/openbmc/20210412034712.16778-1-zev@bewilderbeest.net/
>
> arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts b/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
> index dcab6e78dfa4..8be40c8283af 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
> @@ -4,6 +4,7 @@
> #include "aspeed-g5.dtsi"
> #include <dt-bindings/gpio/aspeed-gpio.h>
> #include <dt-bindings/i2c/i2c.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>
> /{
> model = "ASRock E3C246D4I BMC";
> @@ -73,7 +74,8 @@ &uart5 {
>
> &vuart {
> status = "okay";
> - aspeed,sirq-active-high;
> + aspeed,lpc-io-reg = <0x2f8>;
> + aspeed,lpc-interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> &mac0 {
> --
> 2.31.1
>
Powered by blists - more mailing lists