lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <25ee92527847b2fa15e2c82ca486a92b4fd1d44e.1625227382.git.matthias.schiffer@ew.tq-group.com>
Date:   Fri,  2 Jul 2021 14:23:48 +0200
From:   Matthias Schiffer <matthias.schiffer@...tq-group.com>
To:     Linus Walleij <linus.walleij@...aro.org>,
        Bartosz Golaszewski <bgolaszewski@...libre.com>,
        Lee Jones <lee.jones@...aro.org>
Cc:     Andrew Lunn <andrew@...n.ch>,
        Andy Shevchenko <andy.shevchenko@...il.com>,
        linux-gpio@...r.kernel.org, linux-kernel@...r.kernel.org,
        Matthias Schiffer <matthias.schiffer@...tq-group.com>
Subject: [PATCH v2 2/7] mfd: tqmx86: clear GPIO IRQ resource when no IRQ is set

The driver was registering IRQ 0 when no IRQ was set. This leads to
warnings with newer kernels.

Clear the resource flags, so no resource is registered at all in this
case.

Fixes: 2f17dd34ffed ("mfd: tqmx86: IO controller with I2C, Wachdog and GPIO")
Signed-off-by: Matthias Schiffer <matthias.schiffer@...tq-group.com>
---

v2: add Fixes line

Andy recommended to use IORESOURCE_DISABLED instead, but this doesn't
have any effect for platform_get_irq(), so I'm resubmitting this patch
without functional changes. Grepping for '\.flags = 0;' shows other
drivers doing the same.


 drivers/mfd/tqmx86.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/mfd/tqmx86.c b/drivers/mfd/tqmx86.c
index ddddf08b6a4c..732013f40e4e 100644
--- a/drivers/mfd/tqmx86.c
+++ b/drivers/mfd/tqmx86.c
@@ -209,6 +209,8 @@ static int tqmx86_probe(struct platform_device *pdev)
 
 		/* Assumes the IRQ resource is first. */
 		tqmx_gpio_resources[0].start = gpio_irq;
+	} else {
+		tqmx_gpio_resources[0].flags = 0;
 	}
 
 	ocores_platfom_data.clock_khz = tqmx86_board_id_to_clk_rate(board_id);
-- 
2.17.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ