linux-kernel - [PATCH] arm64: dts: ls1028: sl28: fix networking for variant 2

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Fri,  2 Jul 2021 21:49:14 +0200
From:   Michael Walle <michael@...le.cc>
To:     linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org
Cc:     Shawn Guo <shawnguo@...nel.org>, Li Yang <leoyang.li@....com>,
        Rob Herring <robh+dt@...nel.org>,
        Michael Walle <michael@...le.cc>
Subject: [PATCH] arm64: dts: ls1028: sl28: fix networking for variant 2

The PHY configuration for the variant 2 is still missing the flag for
in-band signalling between PHY and MAC. Both sides - MAC and PHY - have
to match the setting. For now, Linux only supports setting the MAC side
and thus it has to match the setting the bootloader is configuring.
Enable in-band signalling to make ethernet work.

Fixes: ab43f0307449 ("arm64: dts: ls1028a: sl28: add support for variant 2")
Signed-off-by: Michael Walle <michael@...le.cc>
---
What make things worse and why this might slipped through is that the
setting in the PHY is persistent even after a soft reset of the PHY.

 arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
index dd764b720fb0..f6a79c8080d1 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
@@ -54,6 +54,7 @@
 
 &mscc_felix_port0 {
 	label = "swp0";
+	managed = "in-band-status";
 	phy-handle = <&phy0>;
 	phy-mode = "sgmii";
 	status = "okay";
@@ -61,6 +62,7 @@
 
 &mscc_felix_port1 {
 	label = "swp1";
+	managed = "in-band-status";
 	phy-handle = <&phy1>;
 	phy-mode = "sgmii";
 	status = "okay";
-- 
2.20.1