linux-kernel - [PATCH 2/2] soc: qcom: rpmhpd: Make power

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20210703005416.2668319-3-bjorn.andersson@linaro.org>
Date:   Fri,  2 Jul 2021 17:54:16 -0700
From:   Bjorn Andersson <bjorn.andersson@...aro.org>
To:     Andy Gross <agross@...nel.org>,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        Ulf Hansson <ulf.hansson@...aro.org>,
        Stephen Boyd <swboyd@...omium.org>,
        Rajendra Nayak <rnayak@...eaurora.org>,
        Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
Cc:     linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH 2/2] soc: qcom: rpmhpd: Make power_on actually enable the domain

The general expectation is that powering on a power-domain should make
the power domain deliver some power, and if a specific performace state
is needed further requests has to be made.

But in contrast with other power-domain implementations (e.g. rpmpd) the
RPMh does not have an interface to enable the power, so the driver has
to vote for a particular corner (performance level) in rpmh_power_on().

But the corner is never initialized, so a typical request to simply
enable the power domain would not actually turn on the hardware. Further
more, when no more clients vote for a performance state (i.e. the
aggregated vote is 0) the power domain would be turn off.

Fix both of these issues by always voting for a corner with non-zero
value, when the power domain is enabled.

The tracking of the lowest non-zero corner is performed to handle the
corner case if there's ever a domain with a non-zero lowest corner, in
which case both rpmh_power_on() and rpmh_rpmhpd_set_performance_state()
would be allowed to use this lowest corner.

Fixes: 279b7e8a62cc ("soc: qcom: rpmhpd: Add RPMh power domain driver")
Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
---
 drivers/soc/qcom/rpmhpd.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/soc/qcom/rpmhpd.c b/drivers/soc/qcom/rpmhpd.c
index fa209b479ab3..29a339942301 100644
--- a/drivers/soc/qcom/rpmhpd.c
+++ b/drivers/soc/qcom/rpmhpd.c
@@ -30,6 +30,7 @@
  * @active_only:	True if it represents an Active only peer
  * @corner:		current corner
  * @active_corner:	current active corner
+ * @enable_corner:	lowest non-zero corner
  * @level:		An array of level (vlvl) to corner (hlvl) mappings
  *			derived from cmd-db
  * @level_count:	Number of levels supported by the power domain. max
@@ -47,6 +48,7 @@ struct rpmhpd {
 	const bool	active_only;
 	unsigned int	corner;
 	unsigned int	active_corner;
+	unsigned int	enable_corner;
 	u32		level[RPMH_ARC_MAX_LEVELS];
 	size_t		level_count;
 	bool		enabled;
@@ -385,13 +387,13 @@ static int rpmhpd_aggregate_corner(struct rpmhpd *pd, unsigned int corner)
 static int rpmhpd_power_on(struct generic_pm_domain *domain)
 {
 	struct rpmhpd *pd = domain_to_rpmhpd(domain);
-	int ret = 0;
+	unsigned int corner;
+	int ret;
 
 	mutex_lock(&rpmhpd_lock);
 
-	if (pd->corner)
-		ret = rpmhpd_aggregate_corner(pd, pd->corner);
-
+	corner = max(pd->corner, pd->enable_corner);
+	ret = rpmhpd_aggregate_corner(pd, corner);
 	if (!ret)
 		pd->enabled = true;
 
@@ -472,6 +474,10 @@ static int rpmhpd_update_level_mapping(struct rpmhpd *rpmhpd)
 	for (i = 0; i < rpmhpd->level_count; i++) {
 		rpmhpd->level[i] = buf[i];
 
+		/* Remember the first non-zero corner */
+		if (!rpmhpd->enable_corner)
+			rpmhpd->enable_corner = i;
+
 		/*
 		 * The AUX data may be zero padded.  These 0 valued entries at
 		 * the end of the map must be ignored.
-- 
2.29.2