| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAPDyKFo6dmjw0TnaK7=35dq5Si_6YYpeeSa=gU++1od7WkQZ7A@mail.gmail.com>
Date: Tue, 6 Jul 2021 09:54:03 +0200
From: Ulf Hansson <ulf.hansson@...aro.org>
To: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
Peter Chen <peter.chen@....com>
Cc: Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Marcel Holtmann <marcel@...tmann.org>,
Johan Hedberg <johan.hedberg@...il.com>,
Luiz Augusto von Dentz <luiz.dentz@...il.com>,
linux-arm-msm <linux-arm-msm@...r.kernel.org>,
Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
DTML <devicetree@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
linux-bluetooth@...r.kernel.org
Subject: Re: [PATCH v3 2/7] regulator: qca6390: add support for QCA639x
powerup sequence
+ Peter
On Tue, 22 Jun 2021 at 00:32, Dmitry Baryshkov
<dmitry.baryshkov@...aro.org> wrote:
>
> Qualcomm QCA6390/1 is a family of WiFi + Bluetooth SoCs, with BT part
> being controlled through the UART and WiFi being present on PCIe
> bus. Both blocks share common power sources. Add device driver handling
> power sequencing of QCA6390/1.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
Power sequencing of discoverable buses have been discussed several
times before at LKML. The last attempt [1] I am aware of, was in 2017
from Peter Chen. I don't think there is a common solution, yet.
Note that, this isn't specific to the PCIe bus, but rather to all
buses that may have discoverable devices attached and which need some
kind of pre-power-sequence before they can be discovered/probed. USB,
PCIe, SDIO, etc.
Long time ago, we fixed the problem for SDIO (that also can have WiFi,
UART, bluetooth chips attached), but unfortunately through an MMC
subsystem specific implementation, that can't be re-used in a generic
way.
In any case, I have looped in Peter Chen, maybe he can provide us with
a better update on how things have moved forward, if at all.
Kind regards
Uffe
[1]
https://www.spinics.net/lists/linux-usb/msg158451.html
> ---
> drivers/regulator/Kconfig | 13 +++
> drivers/regulator/Makefile | 1 +
> drivers/regulator/qcom-qca639x.c | 157 +++++++++++++++++++++++++++++++
> 3 files changed, 171 insertions(+)
> create mode 100644 drivers/regulator/qcom-qca639x.c
>
> diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
> index 3e7a38525cb3..7a560cddea7a 100644
> --- a/drivers/regulator/Kconfig
> +++ b/drivers/regulator/Kconfig
> @@ -909,6 +909,19 @@ config REGULATOR_PWM
> This driver supports PWM controlled voltage regulators. PWM
> duty cycle can increase or decrease the voltage.
>
> +config REGULATOR_QCOM_QCA639X
> + tristate "Qualcomm QCA639x WiFi/Bluetooth module support"
> + help
> + If you say yes to this option, support will be included for Qualcomm
> + QCA639x family of WiFi and Bluetooth SoCs. Note, this driver supports
> + only power control for this SoC, you still have to enable individual
> + Bluetooth and WiFi drivers. This driver is only necessary on ARM
> + platforms with this chip. PCIe cards handle power sequencing on their
> + own.
> +
> + Say M here if you want to include support for QCA639x chips as a
> + module. This will build a module called "qcom-qca639x".
> +
> config REGULATOR_QCOM_RPM
> tristate "Qualcomm RPM regulator driver"
> depends on MFD_QCOM_RPM
> diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
> index 580b015296ea..129c2110b78d 100644
> --- a/drivers/regulator/Makefile
> +++ b/drivers/regulator/Makefile
> @@ -99,6 +99,7 @@ obj-$(CONFIG_REGULATOR_MT6380) += mt6380-regulator.o
> obj-$(CONFIG_REGULATOR_MT6397) += mt6397-regulator.o
> obj-$(CONFIG_REGULATOR_MTK_DVFSRC) += mtk-dvfsrc-regulator.o
> obj-$(CONFIG_REGULATOR_QCOM_LABIBB) += qcom-labibb-regulator.o
> +obj-$(CONFIG_REGULATOR_QCOM_QCA639X) += qcom-qca639x.o
> obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
> obj-$(CONFIG_REGULATOR_QCOM_RPMH) += qcom-rpmh-regulator.o
> obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o
> diff --git a/drivers/regulator/qcom-qca639x.c b/drivers/regulator/qcom-qca639x.c
> new file mode 100644
> index 000000000000..a2c78c0f8baa
> --- /dev/null
> +++ b/drivers/regulator/qcom-qca639x.c
> @@ -0,0 +1,157 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2021, Linaro Limited
> + */
> +#include <linux/delay.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/regulator/driver.h>
> +#include <linux/regulator/of_regulator.h>
> +#include <linux/slab.h>
> +
> +#define MAX_NUM_REGULATORS 8
> +
> +static struct vreg {
> + const char *name;
> + unsigned int load_uA;
> +} vregs[MAX_NUM_REGULATORS] = {
> + /* 2.0 V */
> + { "vddpcie2", 15000 },
> + { "vddrfa3", 400000 },
> +
> + /* 0.95 V */
> + { "vddaon", 100000 },
> + { "vddpmu", 1250000 },
> + { "vddrfa1", 200000 },
> +
> + /* 1.35 V */
> + { "vddrfa2", 400000 },
> + { "vddpcie1", 35000 },
> +
> + /* 1.8 V */
> + { "vddio", 20000 },
> +};
> +
> +struct qca6390_data {
> + struct device *dev;
> + struct regulator_bulk_data regulators[MAX_NUM_REGULATORS];
> + size_t num_vregs;
> +
> + struct regulator_desc desc;
> + struct regulator_dev *regulator_dev;
> + unsigned int enable_counter;
> +};
> +
> +#define domain_to_data(domain) container_of(domain, struct qca6390_data, pd)
> +
> +static int qca6390_enable(struct regulator_dev *rdev)
> +{
> + struct qca6390_data *data = rdev_get_drvdata(rdev);
> + int ret;
> +
> + ret = regulator_bulk_enable(data->num_vregs, data->regulators);
> + if (ret) {
> + dev_err(data->dev, "Failed to enable regulators");
> + return ret;
> + }
> +
> + /* Wait for 1ms before toggling enable pins. */
> + usleep_range(1000, 2000);
> +
> + data->enable_counter++;
> +
> + return 0;
> +}
> +
> +static int qca6390_disable(struct regulator_dev *rdev)
> +{
> + struct qca6390_data *data = rdev_get_drvdata(rdev);
> +
> + regulator_bulk_disable(data->num_vregs, data->regulators);
> +
> + data->enable_counter--;
> +
> + return 0;
> +}
> +
> +static int qca6390_is_enabled(struct regulator_dev *rdev)
> +{
> + struct qca6390_data *data = rdev_get_drvdata(rdev);
> +
> + return data->enable_counter > 0;
> +}
> +
> +static const struct regulator_ops qca6390_ops = {
> + .enable = qca6390_enable,
> + .disable = qca6390_disable,
> + .is_enabled = qca6390_is_enabled,
> +};
> +
> +static int qca6390_probe(struct platform_device *pdev)
> +{
> + struct qca6390_data *data;
> + struct device *dev = &pdev->dev;
> + struct regulator_config cfg = { };
> + int i, ret;
> +
> + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> +
> + data->dev = dev;
> + data->num_vregs = ARRAY_SIZE(vregs);
> +
> + for (i = 0; i < data->num_vregs; i++)
> + data->regulators[i].supply = vregs[i].name;
> +
> + ret = devm_regulator_bulk_get(dev, data->num_vregs, data->regulators);
> + if (ret < 0)
> + return ret;
> +
> + for (i = 0; i < data->num_vregs; i++) {
> + ret = regulator_set_load(data->regulators[i].consumer, vregs[i].load_uA);
> + if (ret)
> + return ret;
> + }
> +
> + data->desc.name = devm_kstrdup(dev, dev_name(dev), GFP_KERNEL);
> + if (!data->desc.name)
> + return -ENOMEM;
> +
> + data->desc.type = REGULATOR_VOLTAGE;
> + data->desc.owner = THIS_MODULE;
> + data->desc.ops = &qca6390_ops;
> +
> + cfg.dev = dev;
> + cfg.of_node = dev->of_node;
> + cfg.driver_data = data;
> + cfg.init_data = of_get_regulator_init_data(dev, dev->of_node, &data->desc);
> +
> + data->regulator_dev = devm_regulator_register(dev, &data->desc, &cfg);
> + if (IS_ERR(data->regulator_dev)) {
> + ret = PTR_ERR(data->regulator_dev);
> + return ret;
> + }
> +
> + platform_set_drvdata(pdev, data);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id qca6390_of_match[] = {
> + { .compatible = "qcom,qca6390" },
> +};
> +
> +static struct platform_driver qca6390_driver = {
> + .probe = qca6390_probe,
> + .driver = {
> + .name = "qca6390",
> + .of_match_table = qca6390_of_match,
> + },
> +};
> +
> +module_platform_driver(qca6390_driver);
> +MODULE_AUTHOR("Dmitry Baryshkov <dmitry.baryshkov@...aro.org>");
> +MODULE_DESCRIPTION("Power control for Qualcomm QCA6390/1 BT/WiFi chip");
> +MODULE_LICENSE("GPL v2");
> --
> 2.30.2
>
Powered by blists - more mailing lists