[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAM4kBBJSrf=LuwQ=ktfZQgT6TRY0ufmBZNdNOjyn8D-H7MCF-g@mail.gmail.com>
Date: Thu, 8 Jul 2021 16:14:11 +0200
From: Vitaly Wool <vitaly.wool@...sulko.com>
To: Alex Ghiti <alex@...ti.fr>
Cc: Paul Walmsley <paul.walmsley@...ive.com>,
Palmer Dabbelt <palmer@...belt.com>,
Albert Ou <aou@...s.berkeley.edu>,
linux-riscv <linux-riscv@...ts.infradead.org>,
LKML <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH RFC] riscv: Remove all XIP fixups by initializing MMU in memory
Hi Alex,
On Thu, Jul 8, 2021 at 1:43 PM Alex Ghiti <alex@...ti.fr> wrote:
>
> Le 18/06/2021 à 16:23, Alexandre Ghiti a écrit :
> > For XIP kernel, the variables that are accessed when the MMU is off must be
> > fixup and it is currently achieved by adding a preprocessor macro for all
> > those variables. This comes with a few drawbacks:
> >
> > - it adds a lot of code, especially in mm/init.c which gets overloaded,
> > - it easily breaks XIP kernels as anyone accessing a global variable before
> > the MMU is on must fixup this variable,
> > - it prevents the usage of those fixup variables anywhere outside
> > mm/init.c: kernel addresses conversion macros would benefit to switch
> > to inline functions.
> >
> > This patch makes the data fixups unnecessary by initializing the MMU in the
> > memory rather than in flash. Indeed, very soon in the boot process, the
> > kernel is copied to memory and the execution continues from there until
> > the kernel mapping is established where the execution jumps back in
> > flash. Then the offsets from the PC are preserved and no fixup is
> > necessary. And the kernel text in memory is never reserved so it is free
> > to use later on.
> >
> > This solution has the following drawbacks:
> >
> > - XIP kernel boot is longer because of the copy to memory, but can be
> > improved by copying only necessary parts,
> > - in the current implementation, it creates a hole at the beginning of
> > the memory which could prevent large contiguous allocation,
> > - it actually just inverts what needs to be fixup: now rodata and text
> > symbols accessed during the initialization of the MMU must be fixup
> > whereas it was data before. However, I found a single fixup to be
> > necessary and it is the dtb physical address in case CONFIG_BUILTIN_DTB
> > is set.
> >
>
> @Vitaly; Any thought about that? Could you take some time to review/test
> this approach?
thanks for the heads-up. In my opinion, this thing with XIP on RISC-V
is currently going in the completely wrong direction. I would like to
see less data copying and less RAM usage, not more data copying and
more RAM usage.
I would also like to see kernel_mapping_pa_to_va /
kernel_mapping_va_to_pa simplified but that is a different story. I
might come up with something soon though.
Best regards,
Vitaly
> Thanks!
>
> Alex
>
> > Signed-off-by: Alexandre Ghiti <alex@...ti.fr>
> > ---
> > arch/riscv/include/asm/page.h | 12 ++---
> > arch/riscv/include/asm/pgtable.h | 22 +-------
> > arch/riscv/kernel/head.S | 87 +++++++++++++++++++++++---------
> > arch/riscv/kernel/setup.c | 2 +-
> > arch/riscv/mm/init.c | 59 +++-------------------
> > 5 files changed, 78 insertions(+), 104 deletions(-)
> >
> > diff --git a/arch/riscv/include/asm/page.h b/arch/riscv/include/asm/page.h
> > index 5d4622a44b09..97a950bbd3bf 100644
> > --- a/arch/riscv/include/asm/page.h
> > +++ b/arch/riscv/include/asm/page.h
> > @@ -105,11 +105,11 @@ extern unsigned long kernel_virt_addr;
> > ((x) >= PAGE_OFFSET && (x) < kernel_virt_addr)
> >
> > #define linear_mapping_pa_to_va(x) ((void *)((unsigned long)(x) + va_pa_offset))
> > -#define kernel_mapping_pa_to_va(y) ({ \
> > - unsigned long _y = y; \
> > - (_y >= CONFIG_PHYS_RAM_BASE) ? \
> > - (void *)((unsigned long)(_y) + va_kernel_pa_offset + XIP_OFFSET) : \
> > - (void *)((unsigned long)(_y) + va_kernel_xip_pa_offset); \
> > +#define kernel_mapping_pa_to_va(y) ({ \
> > + unsigned long _y = y; \
> > + (_y >= CONFIG_PHYS_RAM_BASE) ? \
> > + (void *)((unsigned long)(_y) + va_kernel_pa_offset) : \
> > + (void *)((unsigned long)(_y) + va_kernel_xip_pa_offset); \
> > })
> > #define __pa_to_va_nodebug(x) linear_mapping_pa_to_va(x)
> >
> > @@ -118,7 +118,7 @@ extern unsigned long kernel_virt_addr;
> > unsigned long _y = y; \
> > (_y < kernel_virt_addr + XIP_OFFSET) ? \
> > ((unsigned long)(_y) - va_kernel_xip_pa_offset) : \
> > - ((unsigned long)(_y) - va_kernel_pa_offset - XIP_OFFSET); \
> > + ((unsigned long)(_y) - va_kernel_pa_offset); \
> > })
> >
> > #define __va_to_pa_nodebug(x) ({ \
> > diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h
> > index 3ccd2dc52e85..99ec99384bf0 100644
> > --- a/arch/riscv/include/asm/pgtable.h
> > +++ b/arch/riscv/include/asm/pgtable.h
> > @@ -95,17 +95,6 @@
> > #include <asm/pgtable-32.h>
> > #endif /* CONFIG_64BIT */
> >
> > -#ifdef CONFIG_XIP_KERNEL
> > -#define XIP_FIXUP(addr) ({ \
> > - uintptr_t __a = (uintptr_t)(addr); \
> > - (__a >= CONFIG_XIP_PHYS_ADDR && __a < CONFIG_XIP_PHYS_ADDR + SZ_16M) ? \
> > - __a - CONFIG_XIP_PHYS_ADDR + CONFIG_PHYS_RAM_BASE - XIP_OFFSET :\
> > - __a; \
> > - })
> > -#else
> > -#define XIP_FIXUP(addr) (addr)
> > -#endif /* CONFIG_XIP_KERNEL */
> > -
> > #ifdef CONFIG_MMU
> > /* Number of entries in the page global directory */
> > #define PTRS_PER_PGD (PAGE_SIZE / sizeof(pgd_t))
> > @@ -683,15 +672,8 @@ static inline pmd_t pmdp_establish(struct vm_area_struct *vma,
> > #define kern_addr_valid(addr) (1) /* FIXME */
> >
> > extern char _start[];
> > -extern void *_dtb_early_va;
> > -extern uintptr_t _dtb_early_pa;
> > -#if defined(CONFIG_XIP_KERNEL) && defined(CONFIG_MMU)
> > -#define dtb_early_va (*(void **)XIP_FIXUP(&_dtb_early_va))
> > -#define dtb_early_pa (*(uintptr_t *)XIP_FIXUP(&_dtb_early_pa))
> > -#else
> > -#define dtb_early_va _dtb_early_va
> > -#define dtb_early_pa _dtb_early_pa
> > -#endif /* CONFIG_XIP_KERNEL */
> > +extern void *dtb_early_va;
> > +extern uintptr_t dtb_early_pa;
> >
> > void paging_init(void);
> > void misc_mem_init(void);
> > diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
> > index 89cc58ab52b4..7ac7d2bd1a53 100644
> > --- a/arch/riscv/kernel/head.S
> > +++ b/arch/riscv/kernel/head.S
> > @@ -17,14 +17,33 @@
> >
> > #ifdef CONFIG_XIP_KERNEL
> > .macro XIP_FIXUP_OFFSET reg
> > - REG_L t0, _xip_fixup
> > + li t0, CONFIG_PHYS_RAM_BASE - CONFIG_XIP_PHYS_ADDR
> > add \reg, \reg, t0
> > .endm
> > -_xip_fixup: .dword CONFIG_PHYS_RAM_BASE - CONFIG_XIP_PHYS_ADDR - XIP_OFFSET
> > +
> > +.macro MEM_FIXUP_OFFSET reg
> > + li t0, CONFIG_XIP_PHYS_ADDR - CONFIG_PHYS_RAM_BASE
> > + add \reg, \reg, t0
> > +.endm
> > +
> > +.macro XIP_JUMP_TO_MEM
> > + la t1, 0f
> > + XIP_FIXUP_OFFSET t1
> > + jalr ra, t1, 0
> > +0:
> > + /* Reload the global pointer: we are now in memory! */
> > +.option push
> > +.option norelax
> > + la gp, __global_pointer$
> > +.option pop
> > +.endm
> > #else
> > -.macro XIP_FIXUP_OFFSET reg
> > +.macro MEM_FIXUP_OFFSET reg
> > +.endm
> > +
> > +.macro XIP_JUMP_TO_MEM
> > .endm
> > -#endif /* CONFIG_XIP_KERNEL */
> > +#endif
> >
> > __HEAD
> > ENTRY(_start)
> > @@ -82,7 +101,6 @@ pe_head_start:
> > relocate:
> > /* Relocate return address */
> > la a1, kernel_virt_addr
> > - XIP_FIXUP_OFFSET a1
> > REG_L a1, 0(a1)
> > la a2, _start
> > sub a1, a1, a2
> > @@ -105,7 +123,6 @@ relocate:
> > * to ensure the new translations are in use.
> > */
> > la a0, trampoline_pg_dir
> > - XIP_FIXUP_OFFSET a0
> > srl a0, a0, PAGE_SHIFT
> > or a0, a0, a1
> > sfence.vma
> > @@ -159,9 +176,7 @@ secondary_start_sbi:
> >
> > slli a3, a0, LGREG
> > la a4, __cpu_up_stack_pointer
> > - XIP_FIXUP_OFFSET a4
> > la a5, __cpu_up_task_pointer
> > - XIP_FIXUP_OFFSET a5
> > add a4, a3, a4
> > add a5, a3, a5
> > REG_L sp, (a4)
> > @@ -173,7 +188,6 @@ secondary_start_common:
> > #ifdef CONFIG_MMU
> > /* Enable virtual memory and relocate to virtual address */
> > la a0, swapper_pg_dir
> > - XIP_FIXUP_OFFSET a0
> > call relocate
> > #endif
> > call setup_trap_vector
> > @@ -253,14 +267,12 @@ pmp_done:
> > tail .Lsecondary_park
> > .Lgood_cores:
> > #endif
> > -
> > #ifndef CONFIG_XIP_KERNEL
> > /* Pick one hart to run the main boot sequence */
> > la a3, hart_lottery
> > li a2, 1
> > amoadd.w a3, a2, (a3)
> > bnez a3, .Lsecondary_start
> > -
> > #else
> > /* hart_lottery in flash contains a magic number */
> > la a3, hart_lottery
> > @@ -270,17 +282,43 @@ pmp_done:
> > amoswap.w t0, t1, (a2)
> > /* first time here if hart_lottery in RAM is not set */
> > beq t0, t1, .Lsecondary_start
> > -
> > - la sp, _end + THREAD_SIZE
> > - XIP_FIXUP_OFFSET sp
> > + /*
> > + * Copy the kernel text and data to memory: the virtual mapping will be
> > + * established from there, and then we will jump back to using flash
> > + * resident text. This avoids to fixup global symbols when the code
> > + * is executed from flash and targets data in memory before the MMU is
> > + * enabled.
> > + * We must preserve a0, a1 and we have no stack yet (__memcpy does not
> > + * spill anything).
> > + */
> > mv s0, a0
> > - call __copy_data
> > + mv s1, a1
> > +
> > + li a0, CONFIG_PHYS_RAM_BASE
> > + la a1, _xiprom
> > + la a2, _exiprom
> > + sub a2, a2, a1
> > + add a2, a2, 1
> > + call __memcpy
> > +
> > + li a0, CONFIG_PHYS_RAM_BASE + XIP_OFFSET
> > + la a1, _sdata
> > + la a2, _end
> > + sub a2, a2, a1
> > + add a2, a2, 1
> > + call __memcpy
> > +
> > + fence.i
> >
> > - /* Restore a0 copy */
> > mv a0, s0
> > -#endif
> > + mv a1, s1
> >
> > -#ifndef CONFIG_XIP_KERNEL
> > + /*
> > + * From here, the code will be executed from memory and we'll jump back
> > + * to flash once the MMU is enabled.
> > + */
> > + XIP_JUMP_TO_MEM
> > +#endif
> > /* Clear BSS for flat non-ELF images */
> > la a3, __bss_start
> > la a4, __bss_stop
> > @@ -290,27 +328,24 @@ clear_bss:
> > add a3, a3, RISCV_SZPTR
> > blt a3, a4, clear_bss
> > clear_bss_done:
> > -#endif
> > /* Save hart ID and DTB physical address */
> > mv s0, a0
> > mv s1, a1
> >
> > la a2, boot_cpu_hartid
> > - XIP_FIXUP_OFFSET a2
> > REG_S a0, (a2)
> >
> > /* Initialize page tables and relocate to virtual addresses */
> > la sp, init_thread_union + THREAD_SIZE
> > - XIP_FIXUP_OFFSET sp
> > #ifdef CONFIG_BUILTIN_DTB
> > la a0, __dtb_start
> > + MEM_FIXUP_OFFSET a0
> > #else
> > mv a0, s1
> > #endif /* CONFIG_BUILTIN_DTB */
> > call setup_vm
> > #ifdef CONFIG_MMU
> > la a0, early_pg_dir
> > - XIP_FIXUP_OFFSET a0
> > call relocate
> > #endif /* CONFIG_MMU */
> >
> > @@ -329,15 +364,19 @@ clear_bss_done:
> >
> > .Lsecondary_start:
> > #ifdef CONFIG_SMP
> > + /*
> > + * From here, XIP kernel will be executed from memory and we'll jump back
> > + * to flash once the MMU is enabled.
> > + */
> > + XIP_JUMP_TO_MEM
> > +
> > /* Set trap vector to spin forever to help debug */
> > la a3, .Lsecondary_park
> > csrw CSR_TVEC, a3
> >
> > slli a3, a0, LGREG
> > la a1, __cpu_up_stack_pointer
> > - XIP_FIXUP_OFFSET a1
> > la a2, __cpu_up_task_pointer
> > - XIP_FIXUP_OFFSET a2
> > add a1, a3, a1
> > add a2, a3, a2
> >
> > diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
> > index 8b7f1c791821..8b7958b30a05 100644
> > --- a/arch/riscv/kernel/setup.c
> > +++ b/arch/riscv/kernel/setup.c
> > @@ -279,7 +279,7 @@ void __init setup_arch(char **cmdline_p)
> > #if IS_ENABLED(CONFIG_BUILTIN_DTB)
> > unflatten_and_copy_device_tree();
> > #else
> > - if (early_init_dt_verify(__va(XIP_FIXUP(dtb_early_pa))))
> > + if (early_init_dt_verify(__va(dtb_early_pa)))
> > unflatten_device_tree();
> > else
> > pr_err("No DTB found in kernel mappings\n");
> > diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
> > index 3d77b04bec54..a70cdd77b2be 100644
> > --- a/arch/riscv/mm/init.c
> > +++ b/arch/riscv/mm/init.c
> > @@ -33,7 +33,6 @@
> > unsigned long kernel_virt_addr = KERNEL_LINK_ADDR;
> > EXPORT_SYMBOL(kernel_virt_addr);
> > #ifdef CONFIG_XIP_KERNEL
> > -#define kernel_virt_addr (*((unsigned long *)XIP_FIXUP(&kernel_virt_addr)))
> > extern char _xiprom[], _exiprom[];
> > #endif
> >
> > @@ -43,8 +42,8 @@ EXPORT_SYMBOL(empty_zero_page);
> >
> > extern char _start[];
> > #define DTB_EARLY_BASE_VA PGDIR_SIZE
> > -void *_dtb_early_va __initdata;
> > -uintptr_t _dtb_early_pa __initdata;
> > +void *dtb_early_va __initdata;
> > +uintptr_t dtb_early_pa __initdata;
> >
> > struct pt_alloc_ops {
> > pte_t *(*get_pte_virt)(phys_addr_t pa);
> > @@ -203,33 +202,18 @@ static void __init setup_bootmem(void)
> > }
> >
> > #ifdef CONFIG_MMU
> > -static struct pt_alloc_ops _pt_ops __initdata;
> > -
> > -#ifdef CONFIG_XIP_KERNEL
> > -#define pt_ops (*(struct pt_alloc_ops *)XIP_FIXUP(&_pt_ops))
> > -#else
> > -#define pt_ops _pt_ops
> > -#endif
> > +static struct pt_alloc_ops pt_ops __initdata;
> >
> > /* Offset between linear mapping virtual address and kernel load address */
> > unsigned long va_pa_offset __ro_after_init;
> > EXPORT_SYMBOL(va_pa_offset);
> > -#ifdef CONFIG_XIP_KERNEL
> > -#define va_pa_offset (*((unsigned long *)XIP_FIXUP(&va_pa_offset)))
> > -#endif
> > /* Offset between kernel mapping virtual address and kernel load address */
> > #ifdef CONFIG_64BIT
> > unsigned long va_kernel_pa_offset __ro_after_init;
> > EXPORT_SYMBOL(va_kernel_pa_offset);
> > #endif
> > -#ifdef CONFIG_XIP_KERNEL
> > -#define va_kernel_pa_offset (*((unsigned long *)XIP_FIXUP(&va_kernel_pa_offset)))
> > -#endif
> > unsigned long va_kernel_xip_pa_offset __ro_after_init;
> > EXPORT_SYMBOL(va_kernel_xip_pa_offset);
> > -#ifdef CONFIG_XIP_KERNEL
> > -#define va_kernel_xip_pa_offset (*((unsigned long *)XIP_FIXUP(&va_kernel_xip_pa_offset)))
> > -#endif
> > unsigned long pfn_base __ro_after_init;
> > EXPORT_SYMBOL(pfn_base);
> >
> > @@ -239,12 +223,6 @@ static pte_t fixmap_pte[PTRS_PER_PTE] __page_aligned_bss;
> >
> > pgd_t early_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
> >
> > -#ifdef CONFIG_XIP_KERNEL
> > -#define trampoline_pg_dir ((pgd_t *)XIP_FIXUP(trampoline_pg_dir))
> > -#define fixmap_pte ((pte_t *)XIP_FIXUP(fixmap_pte))
> > -#define early_pg_dir ((pgd_t *)XIP_FIXUP(early_pg_dir))
> > -#endif /* CONFIG_XIP_KERNEL */
> > -
> > void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys, pgprot_t prot)
> > {
> > unsigned long addr = __fix_to_virt(idx);
> > @@ -320,12 +298,6 @@ static pmd_t fixmap_pmd[PTRS_PER_PMD] __page_aligned_bss;
> > static pmd_t early_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
> > static pmd_t early_dtb_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
> >
> > -#ifdef CONFIG_XIP_KERNEL
> > -#define trampoline_pmd ((pmd_t *)XIP_FIXUP(trampoline_pmd))
> > -#define fixmap_pmd ((pmd_t *)XIP_FIXUP(fixmap_pmd))
> > -#define early_pmd ((pmd_t *)XIP_FIXUP(early_pmd))
> > -#endif /* CONFIG_XIP_KERNEL */
> > -
> > static pmd_t *__init get_pmd_virt_early(phys_addr_t pa)
> > {
> > /* Before MMU is enabled */
> > @@ -442,19 +414,6 @@ static uintptr_t __init best_map_size(phys_addr_t base, phys_addr_t size)
> > return PMD_SIZE;
> > }
> >
> > -#ifdef CONFIG_XIP_KERNEL
> > -/* called from head.S with MMU off */
> > -asmlinkage void __init __copy_data(void)
> > -{
> > - void *from = (void *)(&_sdata);
> > - void *end = (void *)(&_end);
> > - void *to = (void *)CONFIG_PHYS_RAM_BASE;
> > - size_t sz = (size_t)(end - from + 1);
> > -
> > - memcpy(to, from, sz);
> > -}
> > -#endif
> > -
> > #ifdef CONFIG_STRICT_KERNEL_RWX
> > static __init pgprot_t pgprot_from_va(uintptr_t va)
> > {
> > @@ -511,16 +470,10 @@ static __init pgprot_t pgprot_from_va(uintptr_t va)
> >
> > static uintptr_t load_pa __initdata;
> > uintptr_t load_sz;
> > -#ifdef CONFIG_XIP_KERNEL
> > -#define load_pa (*((uintptr_t *)XIP_FIXUP(&load_pa)))
> > -#define load_sz (*((uintptr_t *)XIP_FIXUP(&load_sz)))
> > -#endif
> >
> > #ifdef CONFIG_XIP_KERNEL
> > static uintptr_t xiprom __initdata;
> > static uintptr_t xiprom_sz __initdata;
> > -#define xiprom_sz (*((uintptr_t *)XIP_FIXUP(&xiprom_sz)))
> > -#define xiprom (*((uintptr_t *)XIP_FIXUP(&xiprom)))
> >
> > static void __init create_kernel_page_table(pgd_t *pgdir, uintptr_t map_size,
> > __always_unused bool early)
> > @@ -538,7 +491,7 @@ static void __init create_kernel_page_table(pgd_t *pgdir, uintptr_t map_size,
> > end_va = kernel_virt_addr + XIP_OFFSET + load_sz;
> > for (va = kernel_virt_addr + XIP_OFFSET; va < end_va; va += map_size)
> > create_pgd_mapping(pgdir, va,
> > - load_pa + (va - (kernel_virt_addr + XIP_OFFSET)),
> > + load_pa + (va - kernel_virt_addr),
> > map_size, PAGE_KERNEL);
> > }
> > #else
> > @@ -648,7 +601,7 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
> > * whereas dtb_early_va will be used before setup_vm_final installs
> > * the linear mapping.
> > */
> > - dtb_early_va = kernel_mapping_pa_to_va(XIP_FIXUP(dtb_pa));
> > + dtb_early_va = kernel_mapping_pa_to_va(dtb_pa);
> > #else
> > dtb_early_va = __va(dtb_pa);
> > #endif /* CONFIG_64BIT */
> > @@ -664,7 +617,7 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
> > dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa & (PGDIR_SIZE - 1));
> > #else /* CONFIG_BUILTIN_DTB */
> > #ifdef CONFIG_64BIT
> > - dtb_early_va = kernel_mapping_pa_to_va(XIP_FIXUP(dtb_pa));
> > + dtb_early_va = kernel_mapping_pa_to_va(dtb_pa);
> > #else
> > dtb_early_va = __va(dtb_pa);
> > #endif /* CONFIG_64BIT */
> >
Powered by blists - more mailing lists