Message-ID: <DB6PR0402MB2760797C59DCDE0F284D6AB388189@DB6PR0402MB2760.eurprd04.prod.outlook.com>
Date:   Fri, 9 Jul 2021 10:08:42 +0000
From:   Peng Fan <peng.fan@....com>
To:     Lucas Stach <l.stach@...gutronix.de>,
        "Peng Fan (OSS)" <peng.fan@....nxp.com>,
        "robh+dt@...nel.org" <robh+dt@...nel.org>,
        "shawnguo@...nel.org" <shawnguo@...nel.org>,
        "s.hauer@...gutronix.de" <s.hauer@...gutronix.de>
CC:     "kernel@...gutronix.de" <kernel@...gutronix.de>,
        "festevam@...il.com" <festevam@...il.com>,
        dl-linux-imx <linux-imx@....com>,
        "p.zabel@...gutronix.de" <p.zabel@...gutronix.de>,
        "krzk@...nel.org" <krzk@...nel.org>,
        "agx@...xcpu.org" <agx@...xcpu.org>,
        "marex@...x.de" <marex@...x.de>,
        "andrew.smirnov@...il.com" <andrew.smirnov@...il.com>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        Jacky Bai <ping.bai@....com>,
        "frieder.schrempf@...tron.de" <frieder.schrempf@...tron.de>,
        "aford173@...il.com" <aford173@...il.com>,
        Abel Vesa <abel.vesa@....com>,
        "jagan@...rulasolutions.com" <jagan@...rulasolutions.com>
Subject: RE: [PATCH V8 3/4] soc: imx: Add generic blk-ctl driver

> Subject: Re: [PATCH V8 3/4] soc: imx: Add generic blk-ctl driver
> 
> Hi Peng,
> 
> Am Mittwoch, dem 07.07.2021 um 09:56 +0000 schrieb Peng Fan:
> > Hi Lucas,
> >
> > > Subject: Re: [PATCH V8 3/4] soc: imx: Add generic blk-ctl driver
> >
> > After rethinking about this driver, I think we still need expose to
> > pgc to touch the blk-ctl hardware bus handshake.
> >
> > Currently we are assuming the blk-ctl probe will finish the handshake.
> > But there is another case, saying gpu.
> >
> > ----------------------------------------------------------------------->
> > GPU on(1)
> >           VPUMIX on (2)
> >                         GPU off(3)
> >
> > Between GPU on/off, VPUMIX-BLK-CTL not done, so vpumix pgc handshake
> > not done. Then GPU off (3) will trigger failed to command pgc, because
> > the last pgc(vpu power on) not finished.
> >
> > I think this could be not avoided if we split the handshake into
> > blk-ctl driver. How do you think?
> >
> This is really unfortunate. So the PGC state machine really waits for the ADB
> handshake? 

Not very sure, just a guess here. Because of ....., I am not able to find
HW people to give explaination for the messy hardware design.

About your idea to not create a platform device as what gpcv2 driver did,
I rethink about that.
if we split the handshake in blk-ctl driver, we need saying
vpumix-blk-ctl depends on pgc_vpumix
pgc_vpu_g1/g2/h1 depends on vpumix-blk-ctl bus domain.
It is hard to do defer probe if we just use simple parent/child pd tree.

If we move the handshake back to gpcv2 driver, the blk-ctl driver
could be simplier I think, but have to add reference to blk-ctl node
in pgc node.

And rethink about the gpcv2 driver, should we add a mutex lock
in power on/off? I know that genpd has lock, but the lock is per genpd.

Considering GPU powering on, VPU may be powering off, the power
sequence maybe interrupted by the other. I thought this
may cause failed to command PGC, so better add a mutex lock
in pgc power on/off?


Until now my understanding was that this isn't hooked up in the
> state machine, but sequenced by software through writing and waiting for the
> bits in GPC_PU_PWRHSK.
> 
> > BTW: #linux-imx IRC moved to Libre.Chat
> >
> > >
> > > Hi Peng,
> > >
> > > Am Dienstag, dem 29.06.2021 um 15:29 +0800 schrieb Peng Fan (OSS):
> > > > From: Peng Fan <peng.fan@....com>
> > > >
> > > > The i.MX8MM introduces an IP named BLK_CTL and usually is
> > > > comprised of some GPRs.
> > > >
> > > > The GPRs has some clock bits and reset bits, but here we take it
> > > > as virtual PDs, because of the clock and power domain A/B lock
> > > > issue when taking it as a clock controller.
> > > >
> > > > For some bits, it might be good to also make it as a reset
> > > > controller, but to i.MX8MM, we not add that support for now.
> > > >
> > > > Signed-off-by: Peng Fan <peng.fan@....com>
> > > > ---
> > > >  drivers/soc/imx/Makefile  |   2 +-
> > > >  drivers/soc/imx/blk-ctl.c | 324
> > > > ++++++++++++++++++++++++++++++++++++++
> > > >  drivers/soc/imx/blk-ctl.h |  85 ++++++++++
> > > >  3 files changed, 410 insertions(+), 1 deletion(-)  create mode
> > > > 100644 drivers/soc/imx/blk-ctl.c  create mode 100644
> > > > drivers/soc/imx/blk-ctl.h
> > > >
> > > > diff --git a/drivers/soc/imx/Makefile b/drivers/soc/imx/Makefile
> > > > index 078dc918f4f3..d3d2b49a386c 100644
> > > > --- a/drivers/soc/imx/Makefile
> > > > +++ b/drivers/soc/imx/Makefile
> > > > @@ -4,4 +4,4 @@ obj-$(CONFIG_ARCH_MXC) += soc-imx.o  endif
> > > >  obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
> > > >  obj-$(CONFIG_IMX_GPCV2_PM_DOMAINS) += gpcv2.o
> > > > -obj-$(CONFIG_SOC_IMX8M) += soc-imx8m.o
> > > > +obj-$(CONFIG_SOC_IMX8M) += soc-imx8m.o blk-ctl.o
> > > > diff --git a/drivers/soc/imx/blk-ctl.c b/drivers/soc/imx/blk-ctl.c
> > > > new file mode 100644 index 000000000000..cec1884202e0
> > > > --- /dev/null
> > > > +++ b/drivers/soc/imx/blk-ctl.c
> > > > @@ -0,0 +1,324 @@
> > > > +// SPDX-License-Identifier: GPL-2.0
> > > > +/*
> > > > + * Copyright 2021 NXP.
> > > > + */
> > > > +
> > > > +#include <linux/clk.h>
> > > > +#include <linux/err.h>
> > > > +#include <linux/io.h>
> > > > +#include <linux/module.h>
> > > > +#include <linux/mutex.h>
> > > > +#include <linux/of.h>
> > > > +#include <linux/of_address.h>
> > > > +#include <linux/of_device.h>
> > > > +#include <linux/platform_device.h> #include <linux/pm_runtime.h>
> > > > +#include <linux/pm_domain.h> #include <linux/regmap.h> #include
> > > > +<linux/slab.h>
> > > > +
> > > > +#include "blk-ctl.h"
> > > > +
> > > > +static inline struct imx_blk_ctl_domain *to_imx_blk_ctl_pd(struct
> > > > +generic_pm_domain *genpd) {
> > > > +	return container_of(genpd, struct imx_blk_ctl_domain, genpd); }
> > > > +
> > > > +static int imx_blk_ctl_enable_hsk(struct device *dev) {
> > > > +	struct imx_blk_ctl *blk_ctl = dev_get_drvdata(dev);
> > > > +	const struct imx_blk_ctl_hw *hw = blk_ctl->dev_data->hw_hsk;
> > > > +	struct regmap *regmap = blk_ctl->regmap;
> > > > +	int ret;
> > > > +
> > > > +	if (hw->flags & IMX_BLK_CTL_PD_RESET) {
> > > > +		ret = regmap_update_bits(regmap, hw->rst_offset,
> hw->rst_mask,
> > > hw->rst_mask);
> > > > +		if (ret)
> > > > +			return ret;
> > > > +	}
> > > > +
> > > > +	ret = regmap_update_bits(regmap, hw->offset, hw->mask,
> > > > +hw->mask);
> > > > +
> > > > +	/* Wait for handshake */
> > > > +	udelay(5);
> > > > +
> > > > +	return ret;
> > > > +}
> > > > +
> > > > +static int imx_blk_ctl_power_on(struct generic_pm_domain *domain) {
> > > > +	struct imx_blk_ctl_domain *pd = to_imx_blk_ctl_pd(domain);
> > > > +	struct imx_blk_ctl *blk_ctl = pd->blk_ctl;
> > > > +	struct regmap *regmap = blk_ctl->regmap;
> > > > +	const struct imx_blk_ctl_hw *hw =
> &blk_ctl->dev_data->pds[pd->id];
> > > > +	int ret;
> > > > +
> > > > +	mutex_lock(&blk_ctl->lock);
> > > > +
> > > > +	ret = clk_bulk_prepare_enable(blk_ctl->num_clks, blk_ctl->clks);
> > >
> > > I'm still not a fan of enabling all the clocks going into the
> > > blk-ctl to power up/down one specific domain. It's not really a
> > > problem with clocks, where the parents are always on, as the clock
> > > gate/ungate is pretty cheap, but as soon as you get to something
> > > like the display pixel clock, where the parent PLL may be shut down,
> > > the clock enable may easily be the most costly operation of this
> > > whole function, even if this specific clock isn't even needed for the domain
> in question.
> >
> > We had an agreement to use bulk clks in the beginning :) But I could
> > look into use dedicated clk, but that requires new logic to map each
> > pd with needed clks.
> >
> Yea, I didn't totally reject using bulk clks, but looking at the number of
> different clocks going into e.g. the i.MX8MP MEDIAMIX blk-ctl, I fear that
> using bulk clocks is actually making the power up/down for the blk-ctl
> domains much more costly than it needs to be. I think we should really think
> about this now, as using bulk clks vs. individual clocks for each domain will
> most likely have an impact on the DT binding, so will be very hard to change
> once the driver is accepted upstream.

ok, I see.

> 
> 
> > >
> > > > +	if (ret) {
> > > > +		mutex_unlock(&blk_ctl->lock);
> > > > +		return ret;
> > > > +	}
> > > > +
> > > > +	if (hw->flags & IMX_BLK_CTL_PD_HANDSHAKE) {
> > > > +		ret = imx_blk_ctl_enable_hsk(blk_ctl->dev);
> > > > +		if (ret)
> > > > +			dev_err(blk_ctl->dev, "Handshake failed when power
> on\n");
> > > > +
> > > > +		/* Expected, handshake already handle reset*/
> > > > +		goto disable_clk;
> > > > +	}
> > > > +
> > > > +	if (hw->flags & IMX_BLK_CTL_PD_RESET) {
> > > > +		ret = regmap_clear_bits(regmap, hw->rst_offset,
> hw->rst_mask);
> > > > +		if (ret)
> > > > +			goto disable_clk;
> > > > +
> > > > +		/* Wait for reset propagate */
> > > > +		udelay(5);
> > > > +
> > > > +		ret = regmap_update_bits(regmap, hw->rst_offset,
> hw->rst_mask,
> > > hw->rst_mask);
> > > > +		if (ret)
> > > > +			goto disable_clk;
> > > > +	}
> > > > +
> > > > +	ret = regmap_update_bits(regmap, hw->offset, hw->mask,
> > > > +hw->mask);
> > > >
> > >
> > > I find this very hard to follow and reason about. Why do we even
> > > need those different paths for domains with or without the handshake?
> > >
> > > Shouldn't it be enough to just be enough to do the following in all
> > > cases:
> > > 1. release sft reset
> > > 2. enable sft clock
> > > 3. wait a little for reset to propagate or ADB to ack power up
> >
> > Reset flow is: assert reset, deassert reset, enable clk Handshake
> > flow: deassert reset, enable clk.
> >
> > Per my previous test, use reset flow for handshake seems not work. I
> > could recall clearly.
> >
> That's surprising to me, given that the blk-ctl resets should be asserted when
> we power up the GPC mix domains. I don't dispute your testing, but I would
> be very interested to learn what's going on in hardware that asserting a
> already asserted reset would break the power- up flow.

I could give a re-try, considering the code has changed a lot from the beginning.

You could also give a look at Marex's reset early patch, it maybe caused by
the blk-ctl patch or not, but he confirms after add reset early, gpu/vpu
not met failed to command PGC anymore.
> 
> > >
> > > > +disable_clk:
> > > > +	clk_bulk_disable_unprepare(blk_ctl->num_clks, blk_ctl->clks);
> > > > +
> > > > +	mutex_unlock(&blk_ctl->lock);
> > > > +
> > > > +	return ret;
> > > > +}
> > > > +
> > > > +static int imx_blk_ctl_power_off(struct generic_pm_domain *domain) {
> > > > +	struct imx_blk_ctl_domain *pd = to_imx_blk_ctl_pd(domain);
> > > > +	struct imx_blk_ctl *blk_ctl = pd->blk_ctl;
> > > > +	struct regmap *regmap = blk_ctl->regmap;
> > > > +	const struct imx_blk_ctl_hw *hw =
> &blk_ctl->dev_data->pds[pd->id];
> > > > +	int ret = 0;
> > > > +
> > > > +	mutex_lock(&blk_ctl->lock);
> > > > +
> > > > +	ret = clk_bulk_prepare_enable(blk_ctl->num_clks, blk_ctl->clks);
> > > > +	if (ret) {
> > > > +		mutex_unlock(&blk_ctl->lock);
> > > > +		return ret;
> > > > +	}
> > > > +
> > > > +	if (!(hw->flags & IMX_BLK_CTL_PD_HANDSHAKE)) {
> > > > +		ret = regmap_clear_bits(regmap, hw->offset, hw->mask);
> > > > +		if (ret)
> > > > +			goto disable_clk;
> > > > +
> > > > +		if (hw->flags & IMX_BLK_CTL_PD_RESET) {
> > > > +			ret = regmap_clear_bits(regmap, hw->rst_offset,
> > > hw->rst_mask);
> > > > +			if (ret)
> > > > +				goto disable_clk;
> > > > +		}
> > > > +	} else {
> > > > +		ret = imx_blk_ctl_enable_hsk(blk_ctl->dev);
> > >
> > > Why would we need to enable the handshake again in the power DOWN
> > > path?
> > > The clock/reset bits should still be set from the power up. The
> > > power down should probably just be a no-op for the blk-ctl bus
> > > domains, to allow the proper ADB handshake in the PGC domain
> power-down.
> >
> > I exported VPU-H1 as VPU-BUS for handshake, because they share same
> > bits.  But you raise a valid idea, I think I could drop VPU-BUS, then
> > just no-op here.
> 
> By share the same bits, you mean the ADB is connected to the same clock and
> reset as H1?

G1/G2/H1 all these three bits could be used for ADB handshake, I just use H1 here.


> 
> >
> > BTW: bus should be enabled when power down others.
> 
> I guess bus should just be always enabled as long as the PGC mix domain is
> powered-up, right?

Yes. correct.

> 
> >
> > >
> > > > +		if (ret)
> > > > +			dev_err(blk_ctl->dev, "Handshake failed when power
> off\n");
> > > > +	}
> > > > +
> > > > +disable_clk:
> > > > +	clk_bulk_disable_unprepare(blk_ctl->num_clks, blk_ctl->clks);
> > > > +
> > > > +	mutex_unlock(&blk_ctl->lock);
> > > > +
> > > > +	return ret;
> > > > +}
> > > > +
> > > > +static int imx_blk_ctl_probe(struct platform_device *pdev) {
> > > > +	struct imx_blk_ctl_domain *domain = pdev->dev.platform_data;
> > > > +	struct imx_blk_ctl *blk_ctl = domain->blk_ctl;
> > > > +	struct generic_pm_domain *parent_genpd;
> > > > +	struct device *dev = &pdev->dev;
> > > > +	struct device *active_pd;
> > > > +	int ret;
> > > > +
> > > > +	pdev->dev.of_node = blk_ctl->dev->of_node;
> > > > +
> > > > +	if (domain->hw->active_pd_name) {
> > > > +		active_pd = dev_pm_domain_attach_by_name(dev,
> > > domain->hw->active_pd_name);
> > > > +		if (IS_ERR_OR_NULL(active_pd)) {
> > > > +			ret = PTR_ERR(active_pd) ? : -ENODATA;
> > > > +			pdev->dev.of_node = NULL;
> > >
> > > This is extremely ugly. I think we should not even have separate
> > > platform drivers for the blk-ctl domains, there is just no reason
> > > for it. See below for more comments in that direction.
> > >
> > > > +			return ret;
> > > > +		}
> > > > +
> > > > +		domain->active_pd = active_pd;
> > > > +	} else {
> > > > +		if (!blk_ctl->bus_domain) {
> > > > +			pdev->dev.of_node = NULL;
> > > > +			return -EPROBE_DEFER;
> > > > +		}
> > > > +	}
> > > > +
> > > > +	if (domain->hw->active_pd_name)
> > > > +		parent_genpd = pd_to_genpd(active_pd->pm_domain);
> > > > +	else
> > > > +		parent_genpd = blk_ctl->bus_domain;
> > > > +
> > > > +	if (pm_genpd_add_subdomain(parent_genpd, &domain->genpd)) {
> > > > +		dev_warn(dev, "failed to add subdomain: %s\n",
> > > domain->genpd.name);
> > >
> > > I don't see where the dispmix_bus domain and clock is kept enabled.
> > > I would guess that the bus domain should be some kind of parent to
> > > the lcdif and mipi domains,
> >
> > Yes. vpumix-blk-ctl bus domain is parent to vpu-g1/g2 and similar to others.
> >
> >  as I don't think it would be okay to disable the bus clock, while any
> > > of the peripherals in the dispmix complex are still active. Am I
> > > missing something here?
> >
> > You are right, bus clock should be always kept enable if any periphals
> > in dispmix is alive.
> >
> > >
> > > > +	} else {
> > > > +		mutex_lock(&blk_ctl->lock);
> > > > +		domain->hooked = true;
> > > > +		mutex_unlock(&blk_ctl->lock);
> > > > +	}
> > > > +
> > > > +	return 0;
> > > > +}
> > > > +
> > > > +static int imx_blk_ctl_remove(struct platform_device *pdev) {
> > > > +	struct imx_blk_ctl_domain *domain = pdev->dev.platform_data;
> > > > +	struct imx_blk_ctl *blk_ctl = domain->blk_ctl;
> > > > +	struct generic_pm_domain *parent_genpd;
> > > > +	struct device *active_pd;
> > > > +
> > > > +	if (domain->hw->active_pd_name)
> > > > +		parent_genpd = pd_to_genpd(active_pd->pm_domain);
> > >
> > > This has probably never been tested. active_pd is undefined at this
> > > point, so will most likely lead to a kernel crash.
> >
> > My bad. Indeed, remove not tested.
> >
> > > > +	else
> > > > +		parent_genpd = blk_ctl->bus_domain;
> > > > +
> > > > +	pm_genpd_remove_subdomain(parent_genpd, &domain->genpd);
> > > > +
> > > > +	mutex_lock(&blk_ctl->lock);
> > > > +	domain->hooked = false;
> > > > +	mutex_unlock(&blk_ctl->lock);
> > > > +
> > > > +	if (domain->hw->active_pd_name)
> > > > +		dev_pm_domain_detach(domain->active_pd, false);
> > > > +
> > > > +	return 0;
> > > > +}
> > > > +
> > > > +static const struct platform_device_id imx_blk_ctl_id[] = {
> > > > +	{ "imx-vpumix-blk-ctl", },
> > > > +	{ "imx-dispmix-blk-ctl", },
> > > > +	{ },
> > > > +};
> > > > +
> > > > +static struct platform_driver imx_blk_ctl_driver = {
> > > > +	.driver = {
> > > > +		.name = "imx-blk-ctl",
> > > > +	},
> > > > +	.probe    = imx_blk_ctl_probe,
> > > > +	.remove   = imx_blk_ctl_remove,
> > > > +	.id_table = imx_blk_ctl_id,
> > > > +};
> > > > +builtin_platform_driver(imx_blk_ctl_driver)
> > > > +
> > > > +static struct generic_pm_domain *imx_blk_ctl_genpd_xlate(struct
> > > of_phandle_args *genpdspec,
> > > > +							 void *data)
> > > > +{
> > > > +	struct genpd_onecell_data *genpd_data = data;
> > > > +	unsigned int idx = genpdspec->args[0];
> > > > +	struct imx_blk_ctl_domain *domain;
> > > > +	struct generic_pm_domain *genpd = ERR_PTR(-EPROBE_DEFER);
> > > > +
> > > > +	if (genpdspec->args_count != 1)
> > > > +		return ERR_PTR(-EINVAL);
> > > > +
> > > > +	if (idx >= genpd_data->num_domains)
> > > > +		return ERR_PTR(-EINVAL);
> > > > +
> > > > +	if (!genpd_data->domains[idx])
> > > > +		return ERR_PTR(-ENOENT);
> > > > +
> > > > +	domain = to_imx_blk_ctl_pd(genpd_data->domains[idx]);
> > > > +
> > > > +	mutex_lock(&domain->blk_ctl->lock);
> > > > +	if (domain->hooked)
> > > > +		genpd = genpd_data->domains[idx];
> > > > +	mutex_unlock(&domain->blk_ctl->lock);
> > > > +
> > > > +	return genpd;
> > > > +}
> > > > +
> > > > +int imx_blk_ctl_register(struct device *dev) {
> > > > +	struct imx_blk_ctl *blk_ctl = dev_get_drvdata(dev);
> > > > +	const struct imx_blk_ctl_dev_data *dev_data = blk_ctl->dev_data;
> > > > +	int num = dev_data->pds_num;
> > > > +	struct imx_blk_ctl_domain *domain;
> > > > +	struct generic_pm_domain *genpd;
> > > > +	struct platform_device *pd_pdev;
> > > > +	int domain_index;
> > > > +	int i, ret;
> > > > +
> > > > +	blk_ctl->onecell_data.num_domains = num;
> > > > +	blk_ctl->onecell_data.xlate = imx_blk_ctl_genpd_xlate;
> > > > +	blk_ctl->onecell_data.domains = devm_kcalloc(dev, num,
> > > > +sizeof(struct
> > > generic_pm_domain *),
> > > > +						     GFP_KERNEL);
> > > > +	if (!blk_ctl->onecell_data.domains)
> > > > +		return -ENOMEM;
> > > > +
> > > > +	for (i = 0; i < num; i++) {
> > > > +		domain_index = dev_data->pds[i].id;
> > > > +		if (domain_index >= num) {
> > > > +			dev_warn(dev, "Domain index %d is out of bounds\n",
> > > domain_index);
> > > > +			continue;
> > > > +		}
> > > > +
> > > > +		domain = devm_kzalloc(dev, sizeof(struct imx_blk_ctl_domain),
> > > GFP_KERNEL);
> > > > +		if (!domain)
> > > > +			goto error;
> > > > +
> > > > +		pd_pdev = platform_device_alloc(dev_data->name,
> domain_index);
> > > > +		if (!pd_pdev) {
> > > > +			dev_err(dev, "Failed to allocate platform device\n");
> > > > +			goto error;
> > > > +		}
> > >
> > > We don't need a full blow platform device and a driver for the
> > > individual domains. The only point where we need the device is to
> > > attach the parent PGC power domains and for this we only need a device.
> > >
> > > So we could either have a dummy device for this usage in the domain
> > > or we could even reuse the device in the genpd, which is initialized
> > > in pm_genpd_init.
> > >
> > > Now while I think about it... genpd_dev_pm_attach_by_name already
> > > allocates the virtual dummy device. I don't think we need to do
> > > anything here on our own. Just get rid of the platform device and driver.
> >
> > ok, let me rethink about it. If you have chance to be on IRC, I could
> > talk with you later if I come about new implementation.
> 
> I'm in the IRC channel if you prefer to talk there.

BTW, do you have time to pick up the BLK-CTL part? I think you have
better architecture view than me.

Thanks,
Peng.

> 
> Regards,
> Lucas

Powered by blists - more mailing lists