lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210712061026.618428165@linuxfoundation.org>
Date:   Mon, 12 Jul 2021 08:09:13 +0200
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Kuogee Hsieh <khsieh@...eaurora.org>,
        Stephen Boyd <swboyd@...omium.org>,
        Rob Clark <robdclark@...omium.org>,
        Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.12 470/700] drm/msm/dp: handle irq_hpd with sink_count = 0 correctly

From: Kuogee Hsieh <khsieh@...eaurora.org>

[ Upstream commit f21c8a276c2daddddf58d483b49b01d0603f0316 ]

irq_hpd interrupt should be handled after dongle plugged in and
before dongle unplugged. Hence irq_hpd interrupt is enabled at
the end of the plugin handle and disabled at the beginning of
unplugged handle. Current irq_hpd with sink_count = 0 is wrongly
handled same as the dongle unplugged which tears down the mainlink
and disables the phy. This patch fixes this problem by only tearing
down the mainlink but keeping phy enabled at irq_hpd with
sink_count = 0 handle so that next irq_hpd with sink_count =1 can be
handled by setup mainlink only. This patch also set dongle into D3
(power off) state at end of handling irq_hpd with sink_count = 0.

Changes in v2:
-- add ctrl->phy_Power_count

Changes in v3:
-- del ctrl->phy_Power_count
-- add phy_power_off to dp_ctrl_off_link_stream()

Changes in v4:
-- return immediately if clock disable failed at dp_ctrl_off_link_stream()

Changes in v5:
-- set dongle to D3 (power off) state at dp_ctrl_off_link_stream()

Changes in v6:
-- add Fixes tag

Fixes: ea9f337ce81e ("drm/msm/dp: reset dp controller only at boot up and pm_resume")
Signed-off-by: Kuogee Hsieh <khsieh@...eaurora.org>
Tested-by: Stephen Boyd <swboyd@...omium.org>
Reviewed-by: Stephen Boyd <swboyd@...omium.org>
Link: https://lore.kernel.org/r/1621635930-30161-1-git-send-email-khsieh@codeaurora.org
Signed-off-by: Rob Clark <robdclark@...omium.org>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
 drivers/gpu/drm/msm/dp/dp_catalog.c |  5 +--
 drivers/gpu/drm/msm/dp/dp_ctrl.c    | 55 ++++++++++++++++++++++++++++
 drivers/gpu/drm/msm/dp/dp_ctrl.h    |  2 +
 drivers/gpu/drm/msm/dp/dp_display.c | 57 +++++++++++++++++++++--------
 4 files changed, 101 insertions(+), 18 deletions(-)

diff --git a/drivers/gpu/drm/msm/dp/dp_catalog.c b/drivers/gpu/drm/msm/dp/dp_catalog.c
index b1a9b1b98f5f..f4f53f23e331 100644
--- a/drivers/gpu/drm/msm/dp/dp_catalog.c
+++ b/drivers/gpu/drm/msm/dp/dp_catalog.c
@@ -582,10 +582,9 @@ void dp_catalog_ctrl_hpd_config(struct dp_catalog *dp_catalog)
 
 	u32 reftimer = dp_read_aux(catalog, REG_DP_DP_HPD_REFTIMER);
 
-	/* enable HPD interrupts */
+	/* enable HPD plug and unplug interrupts */
 	dp_catalog_hpd_config_intr(dp_catalog,
-		DP_DP_HPD_PLUG_INT_MASK | DP_DP_IRQ_HPD_INT_MASK
-		| DP_DP_HPD_UNPLUG_INT_MASK | DP_DP_HPD_REPLUG_INT_MASK, true);
+		DP_DP_HPD_PLUG_INT_MASK | DP_DP_HPD_UNPLUG_INT_MASK, true);
 
 	/* Configure REFTIMER and enable it */
 	reftimer |= DP_DP_HPD_REFTIMER_ENABLE;
diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c
index 1390f3547fde..2a8955ca70d1 100644
--- a/drivers/gpu/drm/msm/dp/dp_ctrl.c
+++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
@@ -1809,6 +1809,61 @@ end:
 	return ret;
 }
 
+int dp_ctrl_off_link_stream(struct dp_ctrl *dp_ctrl)
+{
+	struct dp_ctrl_private *ctrl;
+	struct dp_io *dp_io;
+	struct phy *phy;
+	int ret;
+
+	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
+	dp_io = &ctrl->parser->io;
+	phy = dp_io->phy;
+
+	/* set dongle to D3 (power off) mode */
+	dp_link_psm_config(ctrl->link, &ctrl->panel->link_info, true);
+
+	dp_catalog_ctrl_mainlink_ctrl(ctrl->catalog, false);
+
+	ret = dp_power_clk_enable(ctrl->power, DP_STREAM_PM, false);
+	if (ret) {
+		DRM_ERROR("Failed to disable pixel clocks. ret=%d\n", ret);
+		return ret;
+	}
+
+	ret = dp_power_clk_enable(ctrl->power, DP_CTRL_PM, false);
+	if (ret) {
+		DRM_ERROR("Failed to disable link clocks. ret=%d\n", ret);
+		return ret;
+	}
+
+	phy_power_off(phy);
+
+	/* aux channel down, reinit phy */
+	phy_exit(phy);
+	phy_init(phy);
+
+	DRM_DEBUG_DP("DP off link/stream done\n");
+	return ret;
+}
+
+void dp_ctrl_off_phy(struct dp_ctrl *dp_ctrl)
+{
+	struct dp_ctrl_private *ctrl;
+	struct dp_io *dp_io;
+	struct phy *phy;
+
+	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
+	dp_io = &ctrl->parser->io;
+	phy = dp_io->phy;
+
+	dp_catalog_ctrl_reset(ctrl->catalog);
+
+	phy_exit(phy);
+
+	DRM_DEBUG_DP("DP off phy done\n");
+}
+
 int dp_ctrl_off(struct dp_ctrl *dp_ctrl)
 {
 	struct dp_ctrl_private *ctrl;
diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.h b/drivers/gpu/drm/msm/dp/dp_ctrl.h
index a836bd358447..25e4f7512252 100644
--- a/drivers/gpu/drm/msm/dp/dp_ctrl.h
+++ b/drivers/gpu/drm/msm/dp/dp_ctrl.h
@@ -23,6 +23,8 @@ int dp_ctrl_host_init(struct dp_ctrl *dp_ctrl, bool flip, bool reset);
 void dp_ctrl_host_deinit(struct dp_ctrl *dp_ctrl);
 int dp_ctrl_on_link(struct dp_ctrl *dp_ctrl);
 int dp_ctrl_on_stream(struct dp_ctrl *dp_ctrl);
+int dp_ctrl_off_link_stream(struct dp_ctrl *dp_ctrl);
+void dp_ctrl_off_phy(struct dp_ctrl *dp_ctrl);
 int dp_ctrl_off(struct dp_ctrl *dp_ctrl);
 void dp_ctrl_push_idle(struct dp_ctrl *dp_ctrl);
 void dp_ctrl_isr(struct dp_ctrl *dp_ctrl);
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index 1784e119269b..cdec0a367a2c 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -346,6 +346,12 @@ static int dp_display_process_hpd_high(struct dp_display_private *dp)
 	dp->dp_display.max_pclk_khz = DP_MAX_PIXEL_CLK_KHZ;
 	dp->dp_display.max_dp_lanes = dp->parser->max_dp_lanes;
 
+	/*
+	 * set sink to normal operation mode -- D0
+	 * before dpcd read
+	 */
+	dp_link_psm_config(dp->link, &dp->panel->link_info, false);
+
 	dp_link_reset_phy_params_vx_px(dp->link);
 	rc = dp_ctrl_on_link(dp->ctrl);
 	if (rc) {
@@ -414,11 +420,6 @@ static int dp_display_usbpd_configure_cb(struct device *dev)
 
 	dp_display_host_init(dp, false);
 
-	/*
-	 * set sink to normal operation mode -- D0
-	 * before dpcd read
-	 */
-	dp_link_psm_config(dp->link, &dp->panel->link_info, false);
 	rc = dp_display_process_hpd_high(dp);
 end:
 	return rc;
@@ -579,6 +580,10 @@ static int dp_hpd_plug_handle(struct dp_display_private *dp, u32 data)
 		dp_add_event(dp, EV_CONNECT_PENDING_TIMEOUT, 0, tout);
 	}
 
+	/* enable HDP irq_hpd/replug interrupt */
+	dp_catalog_hpd_config_intr(dp->catalog,
+		DP_DP_IRQ_HPD_INT_MASK | DP_DP_HPD_REPLUG_INT_MASK, true);
+
 	mutex_unlock(&dp->event_mutex);
 
 	/* uevent will complete connection part */
@@ -628,7 +633,26 @@ static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data)
 	mutex_lock(&dp->event_mutex);
 
 	state = dp->hpd_state;
-	if (state == ST_DISCONNECT_PENDING || state == ST_DISCONNECTED) {
+
+	/* disable irq_hpd/replug interrupts */
+	dp_catalog_hpd_config_intr(dp->catalog,
+		DP_DP_IRQ_HPD_INT_MASK | DP_DP_HPD_REPLUG_INT_MASK, false);
+
+	/* unplugged, no more irq_hpd handle */
+	dp_del_event(dp, EV_IRQ_HPD_INT);
+
+	if (state == ST_DISCONNECTED) {
+		/* triggered by irq_hdp with sink_count = 0 */
+		if (dp->link->sink_count == 0) {
+			dp_ctrl_off_phy(dp->ctrl);
+			hpd->hpd_high = 0;
+			dp->core_initialized = false;
+		}
+		mutex_unlock(&dp->event_mutex);
+		return 0;
+	}
+
+	if (state == ST_DISCONNECT_PENDING) {
 		mutex_unlock(&dp->event_mutex);
 		return 0;
 	}
@@ -642,9 +666,8 @@ static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data)
 
 	dp->hpd_state = ST_DISCONNECT_PENDING;
 
-	/* disable HPD plug interrupt until disconnect is done */
-	dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_PLUG_INT_MASK
-				| DP_DP_IRQ_HPD_INT_MASK, false);
+	/* disable HPD plug interrupts */
+	dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_PLUG_INT_MASK, false);
 
 	hpd->hpd_high = 0;
 
@@ -660,8 +683,8 @@ static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data)
 	/* signal the disconnect event early to ensure proper teardown */
 	dp_display_handle_plugged_change(g_dp_display, false);
 
-	dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_PLUG_INT_MASK |
-					DP_DP_IRQ_HPD_INT_MASK, true);
+	/* enable HDP plug interrupt to prepare for next plugin */
+	dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_PLUG_INT_MASK, true);
 
 	/* uevent will complete disconnection part */
 	mutex_unlock(&dp->event_mutex);
@@ -692,7 +715,7 @@ static int dp_irq_hpd_handle(struct dp_display_private *dp, u32 data)
 
 	/* irq_hpd can happen at either connected or disconnected state */
 	state =  dp->hpd_state;
-	if (state == ST_DISPLAY_OFF) {
+	if (state == ST_DISPLAY_OFF || state == ST_SUSPENDED) {
 		mutex_unlock(&dp->event_mutex);
 		return 0;
 	}
@@ -910,9 +933,13 @@ static int dp_display_disable(struct dp_display_private *dp, u32 data)
 
 	dp_display->audio_enabled = false;
 
-	dp_ctrl_off(dp->ctrl);
-
-	dp->core_initialized = false;
+	/* triggered by irq_hpd with sink_count = 0 */
+	if (dp->link->sink_count == 0) {
+		dp_ctrl_off_link_stream(dp->ctrl);
+	} else {
+		dp_ctrl_off(dp->ctrl);
+		dp->core_initialized = false;
+	}
 
 	dp_display->power_on = false;
 
-- 
2.30.2



Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ