linux-kernel - [PATCH v15 3/6] iommu: Enhance IOMMU default DMA mode build options

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1626088340-5838-4-git-send-email-john.garry@huawei.com>
Date:   Mon, 12 Jul 2021 19:12:17 +0800
From:   John Garry <john.garry@...wei.com>
To:     <joro@...tes.org>, <will@...nel.org>, <dwmw2@...radead.org>,
        <baolu.lu@...ux.intel.com>, <robin.murphy@....com>,
        <corbet@....net>
CC:     <linux-kernel@...r.kernel.org>, <iommu@...ts.linux-foundation.org>,
        <linuxarm@...wei.com>, <thunder.leizhen@...wei.com>,
        <chenxiang66@...ilicon.com>, <linux-doc@...r.kernel.org>,
        <dianders@...omium.org>, John Garry <john.garry@...wei.com>
Subject: [PATCH v15 3/6] iommu: Enhance IOMMU default DMA mode build options

From: Zhen Lei <thunder.leizhen@...wei.com>

First, add build options IOMMU_DEFAULT_{LAZY|STRICT}, so that we have the
opportunity to set {lazy|strict} mode as default at build time. Then put
the two config options in an choice, as they are mutually exclusive.

[jpg: Make choice between strict and lazy only (and not passthrough)]
Signed-off-by: Zhen Lei <thunder.leizhen@...wei.com>
Signed-off-by: John Garry <john.garry@...wei.com>
Reviewed-by: Robin Murphy <robin.murphy@....com>
Reviewed-by: Lu Baolu <baolu.lu@...ux.intel.com>
---
 .../admin-guide/kernel-parameters.txt         |  3 +-
 drivers/iommu/Kconfig                         | 40 +++++++++++++++++++
 drivers/iommu/iommu.c                         |  2 +-
 3 files changed, 43 insertions(+), 2 deletions(-)

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index a04d2748c99a..90b525cf0ec2 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -2042,9 +2042,10 @@
 			  throughput at the cost of reduced device isolation.
 			  Will fall back to strict mode if not supported by
 			  the relevant IOMMU driver.
-			1 - Strict mode (default).
+			1 - Strict mode.
 			  DMA unmap operations invalidate IOMMU hardware TLBs
 			  synchronously.
+			unset - Use value of CONFIG_IOMMU_DEFAULT_{LAZY,STRICT}.
 			Note: on x86, the default behaviour depends on the
 			equivalent driver-specific parameters, but a strict
 			mode explicitly specified by either method takes
diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index 07b7c25cbed8..9cd5d7afc766 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -90,6 +90,46 @@ config IOMMU_DEFAULT_PASSTHROUGH
 
 	  If unsure, say N here.
 
+choice
+	prompt "IOMMU default DMA IOTLB invalidation mode"
+	depends on IOMMU_DMA
+
+	default IOMMU_DEFAULT_STRICT
+	help
+	  This option allows an IOMMU DMA IOTLB invalidation mode to be
+	  chosen at build time, to override the default mode of each ARCH,
+	  removing the need to pass in kernel parameters through command line.
+	  It is still possible to provide common boot params to override this
+	  config.
+
+	  If unsure, keep the default.
+
+config IOMMU_DEFAULT_STRICT
+	bool "strict"
+	help
+	  For every IOMMU DMA unmap operation, the flush operation of IOTLB and
+	  the free operation of IOVA are guaranteed to be done in the unmap
+	  function.
+
+config IOMMU_DEFAULT_LAZY
+	bool "lazy"
+	help
+	  Support lazy mode, where for every IOMMU DMA unmap operation, the
+	  flush operation of IOTLB and the free operation of IOVA are deferred.
+	  They are only guaranteed to be done before the related IOVA will be
+	  reused.
+
+	  The isolation provided in this mode is not as secure as STRICT mode,
+	  such that a vulnerable time window may be created between the DMA
+	  unmap and the mappings cached in the IOMMU IOTLB or device TLB
+	  finally being invalidated, where the device could still access the
+	  memory which has already been unmapped by the device driver.
+	  However this mode may provide better performance in high throughput
+	  scenarios, and is still considerably more secure than passthrough
+	  mode or no IOMMU.
+
+endchoice
+
 config OF_IOMMU
 	def_bool y
 	depends on OF && IOMMU_API
diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
index cf58949cc2f3..60b1ec42e73b 100644
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -29,7 +29,7 @@ static struct kset *iommu_group_kset;
 static DEFINE_IDA(iommu_group_ida);
 
 static unsigned int iommu_def_domain_type __read_mostly;
-static bool iommu_dma_strict __read_mostly = true;
+static bool iommu_dma_strict __read_mostly = IS_ENABLED(CONFIG_IOMMU_DEFAULT_STRICT);
 static u32 iommu_cmd_line __read_mostly;
 
 struct iommu_group {
-- 
2.26.2