Message-ID: <20210712130631.38153-4-alexandru.tachici@analog.com>
Date:   Mon, 12 Jul 2021 16:06:27 +0300
From:   <alexandru.tachici@...log.com>
To:     <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <devicetree@...r.kernel.org>
CC:     <robh+dt@...nel.org>, <andrew@...n.ch>, <hkallweit1@...il.com>,
        <linux@...linux.org.uk>, <davem@...emloft.net>, <kuba@...nel.org>,
        "Alexandru Ardelean" <alexandru.ardelean@...log.com>,
        Alexandru Tachici <alexandru.tachici@...log.com>
Subject: [PATCH v2 3/7] net: phy: adin1100: Add initial support for ADIN1100 industrial PHY

From: Alexandru Ardelean <alexandru.ardelean@...log.com>

The ADIN1100 is a low power single port 10BASE-T1L transceiver designed for
industrial Ethernet applications and is compliant with the IEEE 802.3cg
Ethernet standard for long reach 10 Mb/s Single Pair Ethernet.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@...log.com>
Signed-off-by: Alexandru Tachici <alexandru.tachici@...log.com>
---
 drivers/net/phy/Kconfig    |   7 +
 drivers/net/phy/Makefile   |   1 +
 drivers/net/phy/adin1100.c | 326 +++++++++++++++++++++++++++++++++++++
 3 files changed, 334 insertions(+)
 create mode 100644 drivers/net/phy/adin1100.c

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index c56f703ae998..8f9f61fe0020 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -83,6 +83,13 @@ config ADIN_PHY
 	  - ADIN1300 - Robust,Industrial, Low Latency 10/100/1000 Gigabit
 	    Ethernet PHY
 
+config ADIN1100_PHY
+	tristate "Analog Devices Industrial Ethernet T1L PHYs"
+	help
+	  Adds support for the Analog Devices Industrial T1L Ethernet PHYs.
+	  Currently supports the:
+	  - ADIN1100 - Robust,Industrial, Low Power 10BASE-T1L Ethernet PHY
+
 config AQUANTIA_PHY
 	tristate "Aquantia PHYs"
 	help
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 172bb193ae6a..3bd6a369d60c 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -31,6 +31,7 @@ sfp-obj-$(CONFIG_SFP)		+= sfp-bus.o
 obj-y				+= $(sfp-obj-y) $(sfp-obj-m)
 
 obj-$(CONFIG_ADIN_PHY)		+= adin.o
+obj-$(CONFIG_ADIN1100_PHY)	+= adin1100.o
 obj-$(CONFIG_AMD_PHY)		+= amd.o
 aquantia-objs			+= aquantia_main.o
 ifdef CONFIG_HWMON
diff --git a/drivers/net/phy/adin1100.c b/drivers/net/phy/adin1100.c
new file mode 100644
index 000000000000..682fc617c51b
--- /dev/null
+++ b/drivers/net/phy/adin1100.c
@@ -0,0 +1,326 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ *  Driver for Analog Devices Industrial Ethernet T1L PHYs
+ *
+ * Copyright 2020 Analog Devices Inc.
+ */
+#include <linux/kernel.h>
+#include <linux/bitfield.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+#include <linux/property.h>
+
+#define PHY_ID_ADIN1100				0x0283bc81
+
+static const int phy_10_features_array[] = {
+	ETHTOOL_LINK_MODE_10baseT1L_Full_BIT,
+	ETHTOOL_LINK_MODE_1000mv_BIT,
+};
+
+#define ADIN_B10L_PCS_CNTRL			0x08e6
+#define   ADIN_PCS_CNTRL_B10L_LB_PCS_EN		BIT(14)
+
+#define ADIN_B10L_PMA_CNTRL			0x08f6
+#define   ADIN_PMA_CNTRL_B10L_LB_PMA_LOC_EN	BIT(0)
+
+#define ADIN_B10L_PMA_STAT			0x08f7
+#define   ADIN_PMA_STAT_B10L_LB_PMA_LOC_ABLE	BIT(13)
+#define   ADIN_PMA_STAT_B10L_TX_LVL_HI_ABLE	BIT(12)
+
+#define ADIN_AN_CONTROL				0x0200
+#define   ADIN_AN_RESTART			BIT(9)
+#define   ADIN_AN_EN				BIT(12)
+
+#define ADIN_AN_STATUS				0x0201
+#define ADIN_AN_ADV_ABILITY_L			0x0202
+#define ADIN_AN_ADV_ABILITY_M			0x0203
+#define ADIN_AN_ADV_ABILITY_H			0x0204U
+#define   ADIN_AN_ADV_B10L_TX_LVL_HI_ABL	BIT(13)
+#define   ADIN_AN_ADV_B10L_TX_LVL_HI_REQ	BIT(12)
+
+#define ADIN_AN_LP_ADV_ABILITY_L		0x0205
+
+#define ADIN_AN_LP_ADV_ABILITY_M		0x0206
+#define   ADIN_AN_LP_ADV_B10L			BIT(14)
+#define   ADIN_AN_LP_ADV_B1000			BIT(7)
+#define   ADIN_AN_LP_ADV_B10S_FD		BIT(6)
+#define   ADIN_AN_LP_ADV_B100			BIT(5)
+#define   ADIN_AN_LP_ADV_MST			BIT(4)
+
+#define ADIN_AN_LP_ADV_ABILITY_H		0x0207
+#define   ADIN_AN_LP_ADV_B10L_EEE		BIT(14)
+#define   ADIN_AN_LP_ADV_B10L_TX_LVL_HI_ABL	BIT(13)
+#define   ADIN_AN_LP_ADV_B10L_TX_LVL_HI_REQ	BIT(12)
+#define   ADIN_AN_LP_ADV_B10S_HD		BIT(11)
+
+#define ADIN_CRSM_SFT_RST			0x8810
+#define   ADIN_CRSM_SFT_RST_EN			BIT(0)
+
+#define ADIN_CRSM_SFT_PD_CNTRL			0x8812
+#define   ADIN_CRSM_SFT_PD_CNTRL_EN		BIT(0)
+
+#define ADIN_CRSM_STAT				0x8818
+#define   ADIN_CRSM_SFT_PD_RDY			BIT(1)
+#define   ADIN_CRSM_SYS_RDY			BIT(0)
+
+#define ADIN_MAC_IF_LOOPBACK			0x803d
+#define   ADIN_MAC_IF_LOOPBACK_EN		BIT(0)
+#define   ADIN_MAC_IF_REMOTE_LOOPBACK_EN	BIT(2)
+
+/**
+ * struct adin_priv - ADIN PHY driver private data
+ * tx_level_24v			set if the PHY supports 2.4V TX levels (10BASE-T1L)
+ */
+struct adin_priv {
+	unsigned int		tx_level_24v:1;
+};
+
+static void adin_mii_adv_m_to_ethtool_adv_t(unsigned long *advertising, u32 adv)
+{
+	if (adv & ADIN_AN_LP_ADV_B10L)
+		linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT, advertising);
+}
+
+static void adin_mii_adv_h_to_ethtool_adv_t(unsigned long *advertising, u32 adv)
+{
+	if (adv & ADIN_AN_LP_ADV_B10S_HD)
+		linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT1L_Half_BIT, advertising);
+	if (adv & ADIN_AN_LP_ADV_B10L_TX_LVL_HI_ABL)
+		linkmode_set_bit(ETHTOOL_LINK_MODE_2400mv_BIT, advertising);
+	if (!(adv & ADIN_AN_LP_ADV_B10L_TX_LVL_HI_REQ))
+		linkmode_set_bit(ETHTOOL_LINK_MODE_1000mv_BIT, advertising);
+}
+
+static int adin_read_lpa(struct phy_device *phydev)
+{
+	int val;
+
+	linkmode_zero(phydev->lp_advertising);
+
+	val = phy_read_mmd(phydev, MDIO_MMD_AN, ADIN_AN_STATUS);
+	if (val < 0)
+		return val;
+
+	if (!(val & MDIO_AN_STAT1_COMPLETE)) {
+		phydev->pause = 0;
+		phydev->asym_pause = 0;
+
+		return 0;
+	}
+
+	linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
+			 phydev->lp_advertising);
+
+	/* Read the link partner's base page advertisement */
+	val = phy_read_mmd(phydev, MDIO_MMD_AN, ADIN_AN_LP_ADV_ABILITY_L);
+	if (val < 0)
+		return val;
+
+	phydev->pause = val & LPA_PAUSE_CAP ? 1 : 0;
+	phydev->asym_pause = val & LPA_PAUSE_ASYM ? 1 : 0;
+
+	val = phy_read_mmd(phydev, MDIO_MMD_AN, ADIN_AN_LP_ADV_ABILITY_M);
+	if (val < 0)
+		return val;
+
+	adin_mii_adv_m_to_ethtool_adv_t(phydev->lp_advertising, val);
+
+	val = phy_read_mmd(phydev, MDIO_MMD_AN, ADIN_AN_LP_ADV_ABILITY_H);
+	if (val < 0)
+		return val;
+
+	adin_mii_adv_h_to_ethtool_adv_t(phydev->lp_advertising, val);
+
+	return 0;
+}
+
+static int adin_read_status(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = genphy_c45_read_link(phydev);
+	if (ret)
+		return ret;
+
+	phydev->speed = SPEED_UNKNOWN;
+	phydev->duplex = DUPLEX_UNKNOWN;
+	phydev->pause = 0;
+	phydev->asym_pause = 0;
+
+	if (phydev->autoneg == AUTONEG_ENABLE) {
+		ret = adin_read_lpa(phydev);
+		if (ret)
+			return ret;
+
+		phy_resolve_aneg_linkmode(phydev);
+	} else {
+		/* Only one mode & duplex supported */
+		linkmode_zero(phydev->lp_advertising);
+		phydev->speed = SPEED_10;
+		phydev->duplex = DUPLEX_FULL;
+	}
+
+	return ret;
+}
+
+static int adin_config_aneg(struct phy_device *phydev)
+{
+	struct adin_priv *priv = phydev->priv;
+	int ret;
+
+	/* No sense to continue if auto-neg is disabled,
+	 * only one link-mode supported.
+	 */
+	if (phydev->autoneg == AUTONEG_DISABLE)
+		return 0;
+
+	if (priv->tx_level_24v)
+		ret = phy_set_bits_mmd(phydev, MDIO_MMD_AN,
+				       ADIN_AN_ADV_ABILITY_H,
+				       ADIN_AN_ADV_B10L_TX_LVL_HI_ABL |
+				       ADIN_AN_ADV_B10L_TX_LVL_HI_REQ);
+	else
+		ret = phy_clear_bits_mmd(phydev, MDIO_MMD_AN,
+					 ADIN_AN_ADV_ABILITY_H,
+					 ADIN_AN_ADV_B10L_TX_LVL_HI_ABL |
+					 ADIN_AN_ADV_B10L_TX_LVL_HI_REQ);
+
+	if (ret < 0)
+		return ret;
+
+	return phy_set_bits_mmd(phydev, MDIO_MMD_AN, ADIN_AN_CONTROL, ADIN_AN_RESTART);
+}
+
+static int adin_set_powerdown_mode(struct phy_device *phydev, bool en)
+{
+	int ret;
+	int val;
+
+	if (en)
+		val = ADIN_CRSM_SFT_PD_CNTRL_EN;
+	else
+		val = 0;
+
+	ret = phy_write_mmd(phydev, MDIO_MMD_VEND1,
+			    ADIN_CRSM_SFT_PD_CNTRL, val);
+	if (ret < 0)
+		return ret;
+
+	return phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1, ADIN_CRSM_STAT, ret,
+					 (ret & ADIN_CRSM_SFT_PD_RDY) == val,
+					 1000, 30000, true);
+}
+
+static int adin_suspend(struct phy_device *phydev)
+{
+	return adin_set_powerdown_mode(phydev, true);
+}
+
+static int adin_resume(struct phy_device *phydev)
+{
+	return adin_set_powerdown_mode(phydev, false);
+}
+
+static int adin_set_loopback(struct phy_device *phydev, bool enable)
+{
+	if (enable)
+		return phy_set_bits_mmd(phydev, MDIO_MMD_PCS, ADIN_B10L_PCS_CNTRL,
+					ADIN_PCS_CNTRL_B10L_LB_PCS_EN);
+
+	/* PCS loopback (according to 10BASE-T1L spec) */
+	return phy_clear_bits_mmd(phydev, MDIO_MMD_PCS, ADIN_B10L_PCS_CNTRL,
+				 ADIN_PCS_CNTRL_B10L_LB_PCS_EN);
+}
+
+static int adin_soft_reset(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, ADIN_CRSM_SFT_RST, ADIN_CRSM_SFT_RST_EN);
+	if (ret < 0)
+		return ret;
+
+	return phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1, ADIN_CRSM_STAT, ret,
+					 (ret & ADIN_CRSM_SYS_RDY),
+					 10000, 30000, true);
+}
+
+static int adin_get_features(struct phy_device *phydev)
+{
+	struct adin_priv *priv = phydev->priv;
+	struct device *dev = &phydev->mdio.dev;
+	int ret;
+
+	ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, ADIN_B10L_PMA_STAT);
+	if (ret < 0)
+		return ret;
+
+	/* This depends on the voltage level from the power source */
+	priv->tx_level_24v = !!(ret & ADIN_PMA_STAT_B10L_TX_LVL_HI_ABLE);
+
+	phydev_dbg(phydev, "PHY supports 2.4V TX level: %s\n",
+		   priv->tx_level_24v ? "yes" : "no");
+
+	if (device_property_present(dev, "adi,disable-2400mv-tx-level")) {
+		if (priv->tx_level_24v)
+			phydev_info(phydev,
+				    "PHY supports 2.4V TX level, but disabled via config\n");
+
+		priv->tx_level_24v = 0;
+	}
+
+	if (priv->tx_level_24v)
+		linkmode_set_bit(ETHTOOL_LINK_MODE_2400mv_BIT, phydev->supported);
+
+	linkmode_set_bit_array(phy_basic_ports_array, ARRAY_SIZE(phy_basic_ports_array),
+			       phydev->supported);
+
+	linkmode_set_bit_array(phy_10_features_array, ARRAY_SIZE(phy_10_features_array),
+			       phydev->supported);
+
+	return 0;
+}
+
+static int adin_probe(struct phy_device *phydev)
+{
+	struct device *dev = &phydev->mdio.dev;
+	struct adin_priv *priv;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	phydev->priv = priv;
+
+	return 0;
+}
+
+static struct phy_driver adin_driver[] = {
+	{
+		PHY_ID_MATCH_MODEL(PHY_ID_ADIN1100),
+		.name			= "ADIN1100",
+		.get_features		= adin_get_features,
+		.soft_reset		= adin_soft_reset,
+		.probe			= adin_probe,
+		.config_aneg		= adin_config_aneg,
+		.read_status		= adin_read_status,
+		.set_loopback		= adin_set_loopback,
+		.suspend		= adin_suspend,
+		.resume			= adin_resume,
+	},
+};
+
+module_phy_driver(adin_driver);
+
+static struct mdio_device_id __maybe_unused adin_tbl[] = {
+	{ PHY_ID_MATCH_MODEL(PHY_ID_ADIN1100) },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(mdio, adin_tbl);
+MODULE_DESCRIPTION("Analog Devices Industrial Ethernet T1L PHY driver");
+MODULE_LICENSE("Dual BSD/GPL");
-- 
2.25.1

Powered by blists - more mailing lists