lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210712060851.836275348@linuxfoundation.org>
Date:   Mon, 12 Jul 2021 08:03:59 +0200
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org,
        Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>
Subject: [PATCH 5.10 079/593] serial: sh-sci: Stop dmaengine transfer in sci_stop_tx()

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>

commit 08a84410a04f05c7c1b8e833f552416d8eb9f6fe upstream.

Stop dmaengine transfer in sci_stop_tx(). Otherwise, the following
message is possible output when system enters suspend and while
transferring data, because clearing TIE bit in SCSCR is not able to
stop any dmaengine transfer.

    sh-sci e6550000.serial: ttySC1: Unable to drain transmitter

Note that this driver has already used some #ifdef in the .c file
so that this patch also uses #ifdef to fix the issue. Otherwise,
build errors happens if the CONFIG_SERIAL_SH_SCI_DMA is disabled.

Fixes: 73a19e4c0301 ("serial: sh-sci: Add DMA support.")
Cc: <stable@...r.kernel.org> # v4.9+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>
Link: https://lore.kernel.org/r/20210610110806.277932-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>

---
 drivers/tty/serial/sh-sci.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -610,6 +610,14 @@ static void sci_stop_tx(struct uart_port
 	ctrl &= ~SCSCR_TIE;
 
 	serial_port_out(port, SCSCR, ctrl);
+
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+	if (to_sci_port(port)->chan_tx &&
+	    !dma_submit_error(to_sci_port(port)->cookie_tx)) {
+		dmaengine_terminate_async(to_sci_port(port)->chan_tx);
+		to_sci_port(port)->cookie_tx = -EINVAL;
+	}
+#endif
 }
 
 static void sci_start_rx(struct uart_port *port)


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ