linux-kernel - Re: thunderbolt: Warning and 20 second delay in S4

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Tue, 13 Jul 2021 13:50:47 -0700
From:   Evan Green <evgreen@...omium.org>
To:     "Mani, Rajmohan" <rajmohan.mani@...el.com>
Cc:     Greg KH <gregkh@...uxfoundation.org>,
        Mika Westerberg <mika.westerberg@...ux.intel.com>,
        "Fine, Gil" <gil.fine@...el.com>,
        "linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>,
        Prashant Malani <pmalani@...gle.com>,
        LKML <linux-kernel@...r.kernel.org>
Subject: Re: thunderbolt: Warning and 20 second delay in S4

Hi Raj,
Sure. I've got a TGL chromebook with my own kernel. The chromebook has
nothing but a servo v4 plugged into it via type-C.

I built the kernel by checking out next-20210709 from linux-next in
the v5.4 ChromeOS chroot directory, then doing "git checkout m/main --
chromeos", in order to get the configs. My chromeos-5.4 (where I
pulled the configs from) happened to be on 04686c32716158 UPSTREAM:
ASoC: rt5682-sdw: use first_hw_init flag on resume, though I don't
think it matters.

>From there, my build line is:
USE="kgdb pcserial vtconsole " emerge-volteer chromeos-kernel-5_4

My commandline has "earlyprintk=ttyS0,115200n8 console=ttyS0,115200n8"
so I get spew out of the serial port, but otherwise it should be
standard. I'm also tracking this in b/192575702.

-Evan

On Mon, Jul 12, 2021 at 5:16 PM Mani, Rajmohan <rajmohan.mani@...el.com> wrote:
>
> Hi Evan,
>
> > -----Original Message-----
> > From: Evan Green <evgreen@...omium.org>
> > Sent: Monday, July 12, 2021 4:46 PM
> > To: Greg KH <gregkh@...uxfoundation.org>
> > Cc: Mika Westerberg <mika.westerberg@...ux.intel.com>; Fine, Gil
> > <gil.fine@...el.com>; Mani, Rajmohan <rajmohan.mani@...el.com>; linux-
> > usb@...r.kernel.org; Prashant Malani <pmalani@...gle.com>; LKML <linux-
> > kernel@...r.kernel.org>
> > Subject: Re: thunderbolt: Warning and 20 second delay in S4
> >
> > On Fri, Jul 9, 2021 at 11:34 PM Greg KH <gregkh@...uxfoundation.org> wrote:
> > >
> > > On Fri, Jul 09, 2021 at 02:31:35PM -0700, Evan Green wrote:
> > > > Hi Mika et al,
> > > >
> > > > I'm experimenting with suspending to disk (hibernate) on a Tigerlake
> > > > Chromebook running the chromeos-5.4 kernel. I don't have any USB4
> > > > peripherals plugged in. I'm getting this warning, along with a 20
> > > > second stall, both when going down for hibernate and coming back up.
> > >
> > > 5.4 is pretty old, especially for thunderbolt issues, can you try 5.13
> > > please?
> >
> > Good idea. On 5.13.0-next-20210709, I see the warning and delay even at boot
> > when runtime pm kicks in. This should make for an easier repro at least:
> >
> > [   18.832016] thunderbolt 0000:00:0d.2: 0: timeout reading config
> > space 2 from 0x6
> > [   18.840309] ------------[ cut here ]------------
> > [   18.845466] thunderbolt 0000:00:0d.2: interrupt for RX ring 0 is
> > already disabled
> > [   18.853836] WARNING: CPU: 0 PID: 5 at drivers/thunderbolt/nhi.c:103
> > ring_interrupt_active+0x1b7/0x1da
> > ...
> > [   18.977736] CPU: 0 PID: 5 Comm: kworker/0:0 Tainted: G     U
> >     5.13.0-next-20210709 #18
> > [   18.996804] Workqueue: pm pm_runtime_work
> > [   19.001285] RIP: 0010:ring_interrupt_active+0x1b7/0x1da
> > ...
> > [   19.100302] Call Trace:
> > [   19.103031]  tb_ring_stop+0x9d/0x17d
> > [   19.107022]  tb_ctl_stop+0x33/0xa0
> > [   19.110822]  tb_domain_runtime_suspend+0x35/0x3a
> > [   19.115979]  nhi_runtime_suspend+0x1f/0x4c
> > [   19.120557]  pci_pm_runtime_suspend+0x5a/0x173
> > [   19.125533]  ? pci_pm_restore_noirq+0x73/0x73
> > [   19.130411]  __rpm_callback+0x8a/0x10d
> > [   19.134595]  rpm_callback+0x22/0x74
> > [   19.138489]  ? pci_pm_restore_noirq+0x73/0x73
> > [   19.143355]  rpm_suspend+0x21e/0x514
> > [   19.147355]  pm_runtime_work+0x8a/0xa5
> > [   19.151554]  process_one_work+0x1b7/0x368
> > [   19.156027]  worker_thread+0x213/0x372
> > [   19.160217]  kthread+0x147/0x15f
> > [   19.163827]  ? pr_cont_work+0x58/0x58
> > [   19.167928]  ? kthread_blkcg+0x31/0x31
> > [   19.172113]  ret_from_fork+0x1f/0x30
> > [   19.176105] ---[ end trace 438b7f20f6b4049d ]---
>
> I used to see these timeout errors, when there was a control
> read/write issued to the thunderbolt/usb4 device, after the
> thunderbolt driver is suspended.
> Can you share the steps to reproduce this S4 issue in a Chrome device?
>
> Thanks
> Raj