linux-kernel - [PATCH v5 0/8] Add support for Hikey 970 PCIe

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <cover.1626157454.git.mchehab+huawei@kernel.org>
Date:   Tue, 13 Jul 2021 08:28:33 +0200
From:   Mauro Carvalho Chehab <mchehab+huawei@...nel.org>
To:     Bjorn Helgaas <helgaas@...nel.org>
Cc:     linuxarm@...wei.com, mauro.chehab@...wei.com,
        Mauro Carvalho Chehab <mchehab+huawei@...nel.org>,
        Manivannan Sadhasivam <mani@...nel.org>,
        Rob Herring <robh@...nel.org>,
        Krzysztof Wilczyński <kw@...ux.com>,
        Binghui Wang <wangbinghui@...ilicon.com>,
        Rob Herring <robh+dt@...nel.org>,
        Xiaowei Song <songxiaowei@...ilicon.com>,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org, linux-pci@...r.kernel.org,
        linux-phy@...ts.infradead.org
Subject: [PATCH v5 0/8] Add support for Hikey 970 PCIe

As requested by Rob Herring, this series split the PHY part into a separate driver.
Then, it adds support for Kirin 970 on a single patch.

With this change, the PHY-specific device tree bindings for Kirin 960 moved
to its own PHY properties.

Tested on Hikey970:

  $ lspci
  00:00.0 PCI bridge: Huawei Technologies Co., Ltd. Device 3670 (rev 01)
  01:00.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
  02:01.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
  02:04.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
  02:05.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
  02:07.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
  02:09.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
  06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 07)

  $ ethtool enp6s0
  Settings for enp6s0:
	Supported ports: [ TP	 MII ]
	Supported link modes:   10baseT/Half 10baseT/Full
	                        100baseT/Half 100baseT/Full
	                        1000baseT/Half 1000baseT/Full
	Supported pause frame use: Symmetric Receive-only
	Supports auto-negotiation: Yes
	Supported FEC modes: Not reported
	Advertised link modes:  10baseT/Half 10baseT/Full
	                        100baseT/Half 100baseT/Full
	                        1000baseT/Half 1000baseT/Full
	Advertised pause frame use: Symmetric Receive-only
	Advertised auto-negotiation: Yes
	Advertised FEC modes: Not reported
	Link partner advertised link modes:  10baseT/Half 10baseT/Full
	                                     100baseT/Half 100baseT/Full
	Link partner advertised pause frame use: Symmetric Receive-only
	Link partner advertised auto-negotiation: Yes
	Link partner advertised FEC modes: Not reported
	Speed: 100Mb/s
	Duplex: Full
	Auto-negotiation: on
	master-slave cfg: preferred slave
	master-slave status: slave
	Port: Twisted Pair
	PHYAD: 0
	Transceiver: external
	MDI-X: Unknown
  netlink error: Operation not permitted
	Link detected: yes

Partially tested on Hikey 960[1]:

  $ lspci
  00:00.0 PCI bridge: Huawei Technologies Co., Ltd. Device 3660 (rev 01)

[1] The Hikey 960 doesn't come with any internal PCIe device.
    Its hardware supports just an external device via a M.2 slot that
    doesn't support SATA. I ordered a NVMe device to test, but the vendor
    is currently out of supply. It should take 3-4 weeks to arrive here. I'll
    run an extra test on it once it arrives.

---

v5:
- added "static" to hi3670_pcie_get_eyeparam() declaration on patch 6/8

v4:

- dropped the DTS patch, as it depends on a PMIC-related patch series;
- minor changes at the patch description;
- HiKey and HiSilicon are now using the preferred CamelCase format.


Mauro Carvalho Chehab (8):
  dt-bindings: phy: Add bindings for HiKey 960 PCIe PHY
  dt-bindings: phy: Add bindings for HiKey 970 PCIe PHY
  dt-bindings: PCI: kirin: Fix compatible string
  dt-bindings: PCI: kirin: Drop PHY properties
  phy: HiSilicon: Add driver for Kirin 960 PCIe PHY
  phy: HiSilicon: add driver for Kirin 970 PCIe PHY
  PCI: kirin: Drop the PHY logic from the driver
  PCI: kirin: Use regmap for APB registers

 .../devicetree/bindings/pci/kirin-pcie.txt    |  21 +-
 .../phy/hisilicon,phy-hi3660-pcie.yaml        |  82 ++
 .../phy/hisilicon,phy-hi3670-pcie.yaml        | 101 ++
 arch/arm64/boot/dts/hisilicon/hi3660.dtsi     |  29 +-
 drivers/pci/controller/dwc/pcie-kirin.c       | 298 ++----
 drivers/phy/hisilicon/Kconfig                 |  20 +
 drivers/phy/hisilicon/Makefile                |   2 +
 drivers/phy/hisilicon/phy-hi3660-pcie.c       | 325 +++++++
 drivers/phy/hisilicon/phy-hi3670-pcie.c       | 892 ++++++++++++++++++
 9 files changed, 1500 insertions(+), 270 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/hisilicon,phy-hi3660-pcie.yaml
 create mode 100644 Documentation/devicetree/bindings/phy/hisilicon,phy-hi3670-pcie.yaml
 create mode 100644 drivers/phy/hisilicon/phy-hi3660-pcie.c
 create mode 100644 drivers/phy/hisilicon/phy-hi3670-pcie.c

-- 
2.31.1