| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1394712342-15778-370-Taiwan-albertk@realtek.com>
Date: Tue, 13 Jul 2021 17:18:36 +0800
From: Hayes Wang <hayeswang@...ltek.com>
To: <kuba@...nel.org>, <davem@...emloft.net>
CC: <netdev@...r.kernel.org>, <nic_swsd@...ltek.com>,
<linux-kernel@...r.kernel.org>, <linux-usb@...r.kernel.org>,
Hayes Wang <hayeswang@...ltek.com>
Subject: [PATCH net-next 2/2] r8152: separate the r8152.c into r8152_main.c and r8152_fw.c
Rename r8152.c with r8152_main.c. Move some basic definitions from
r8152_main.c to r8152_basic.h. Move the relative code of firmware
from r8152_main.c to r8152_fw.c. Rename the definition of "EFUSE"
with "USB_EFUSE".
Signed-off-by: Hayes Wang <hayeswang@...ltek.com>
---
drivers/net/usb/realtek/Makefile | 1 +
drivers/net/usb/realtek/r8152_basic.h | 861 ++++++
drivers/net/usb/realtek/r8152_fw.c | 1557 ++++++++++
.../net/usb/realtek/{r8152.c => r8152_main.c} | 2590 +----------------
4 files changed, 2527 insertions(+), 2482 deletions(-)
create mode 100644 drivers/net/usb/realtek/r8152_basic.h
create mode 100644 drivers/net/usb/realtek/r8152_fw.c
rename drivers/net/usb/realtek/{r8152.c => r8152_main.c} (75%)
diff --git a/drivers/net/usb/realtek/Makefile b/drivers/net/usb/realtek/Makefile
index 6f89910a8f76..513a34775e0a 100644
--- a/drivers/net/usb/realtek/Makefile
+++ b/drivers/net/usb/realtek/Makefile
@@ -5,4 +5,5 @@
obj-$(CONFIG_USB_RTL8150) += rtl8150.o
obj-$(CONFIG_USB_RTL8152) += r8152.o
+r8152-objs := r8152_main.o r8152_fw.o
obj-$(CONFIG_USB_RTL8153_ECM) += r8153_ecm.o
diff --git a/drivers/net/usb/realtek/r8152_basic.h b/drivers/net/usb/realtek/r8152_basic.h
new file mode 100644
index 000000000000..96af784d7535
--- /dev/null
+++ b/drivers/net/usb/realtek/r8152_basic.h
@@ -0,0 +1,861 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2021 Realtek Semiconductor Corp. All rights reserved.
+ */
+
+#ifndef LINUX_R8152_BASIC_H
+#define LINUX_R8152_BASIC_H
+
+#define PLA_IDR 0xc000
+#define PLA_RCR 0xc010
+#define PLA_RCR1 0xc012
+#define PLA_RMS 0xc016
+#define PLA_RXFIFO_CTRL0 0xc0a0
+#define PLA_RXFIFO_FULL 0xc0a2
+#define PLA_RXFIFO_CTRL1 0xc0a4
+#define PLA_RX_FIFO_FULL 0xc0a6
+#define PLA_RXFIFO_CTRL2 0xc0a8
+#define PLA_RX_FIFO_EMPTY 0xc0aa
+#define PLA_DMY_REG0 0xc0b0
+#define PLA_FMC 0xc0b4
+#define PLA_CFG_WOL 0xc0b6
+#define PLA_TEREDO_CFG 0xc0bc
+#define PLA_TEREDO_WAKE_BASE 0xc0c4
+#define PLA_MAR 0xcd00
+#define PLA_BACKUP 0xd000
+#define PLA_BDC_CR 0xd1a0
+#define PLA_TEREDO_TIMER 0xd2cc
+#define PLA_REALWOW_TIMER 0xd2e8
+#define PLA_UPHY_TIMER 0xd388
+#define PLA_SUSPEND_FLAG 0xd38a
+#define PLA_INDICATE_FALG 0xd38c
+#define PLA_MACDBG_PRE 0xd38c /* RTL_VER_04 only */
+#define PLA_MACDBG_POST 0xd38e /* RTL_VER_04 only */
+#define PLA_EXTRA_STATUS 0xd398
+#define PLA_GPHY_CTRL 0xd3ae
+#define PLA_POL_GPIO_CTRL 0xdc6a
+#define PLA_EFUSE_DATA 0xdd00
+#define PLA_EFUSE_CMD 0xdd02
+#define PLA_LEDSEL 0xdd90
+#define PLA_LED_FEATURE 0xdd92
+#define PLA_PHYAR 0xde00
+#define PLA_BOOT_CTRL 0xe004
+#define PLA_LWAKE_CTRL_REG 0xe007
+#define PLA_GPHY_INTR_IMR 0xe022
+#define PLA_EEE_CR 0xe040
+#define PLA_EEE_TXTWSYS 0xe04c
+#define PLA_EEE_TXTWSYS_2P5G 0xe058
+#define PLA_EEEP_CR 0xe080
+#define PLA_MAC_PWR_CTRL 0xe0c0
+#define PLA_MAC_PWR_CTRL2 0xe0ca
+#define PLA_MAC_PWR_CTRL3 0xe0cc
+#define PLA_MAC_PWR_CTRL4 0xe0ce
+#define PLA_WDT6_CTRL 0xe428
+#define PLA_TCR0 0xe610
+#define PLA_TCR1 0xe612
+#define PLA_MTPS 0xe615
+#define PLA_TXFIFO_CTRL 0xe618
+#define PLA_TXFIFO_FULL 0xe61a
+#define PLA_RSTTALLY 0xe800
+#define PLA_CR 0xe813
+#define PLA_CRWECR 0xe81c
+#define PLA_CONFIG12 0xe81e /* CONFIG1, CONFIG2 */
+#define PLA_CONFIG34 0xe820 /* CONFIG3, CONFIG4 */
+#define PLA_CONFIG5 0xe822
+#define PLA_PHY_PWR 0xe84c
+#define PLA_OOB_CTRL 0xe84f
+#define PLA_CPCR 0xe854
+#define PLA_MISC_0 0xe858
+#define PLA_MISC_1 0xe85a
+#define PLA_OCP_GPHY_BASE 0xe86c
+#define PLA_TALLYCNT 0xe890
+#define PLA_SFF_STS_7 0xe8de
+#define PLA_PHYSTATUS 0xe908
+#define PLA_CONFIG6 0xe90a /* CONFIG6 */
+#define PLA_USB_CFG 0xe952
+#define PLA_BP_BA 0xfc26
+#define PLA_BP_0 0xfc28
+#define PLA_BP_1 0xfc2a
+#define PLA_BP_2 0xfc2c
+#define PLA_BP_3 0xfc2e
+#define PLA_BP_4 0xfc30
+#define PLA_BP_5 0xfc32
+#define PLA_BP_6 0xfc34
+#define PLA_BP_7 0xfc36
+#define PLA_BP_EN 0xfc38
+
+#define USB_USB2PHY 0xb41e
+#define USB_SSPHYLINK1 0xb426
+#define USB_SSPHYLINK2 0xb428
+#define USB_L1_CTRL 0xb45e
+#define USB_U2P3_CTRL 0xb460
+#define USB_CSR_DUMMY1 0xb464
+#define USB_CSR_DUMMY2 0xb466
+#define USB_DEV_STAT 0xb808
+#define USB_CONNECT_TIMER 0xcbf8
+#define USB_MSC_TIMER 0xcbfc
+#define USB_BURST_SIZE 0xcfc0
+#define USB_FW_FIX_EN0 0xcfca
+#define USB_FW_FIX_EN1 0xcfcc
+#define USB_LPM_CONFIG 0xcfd8
+#define USB_EFUSE 0xcfdb
+#define USB_ECM_OPTION 0xcfee
+#define USB_CSTMR 0xcfef /* RTL8153A */
+#define USB_MISC_2 0xcfff
+#define USB_ECM_OP 0xd26b
+#define USB_GPHY_CTRL 0xd284
+#define USB_SPEED_OPTION 0xd32a
+#define USB_FW_CTRL 0xd334 /* RTL8153B */
+#define USB_FC_TIMER 0xd340
+#define USB_USB_CTRL 0xd406
+#define USB_PHY_CTRL 0xd408
+#define USB_TX_AGG 0xd40a
+#define USB_RX_BUF_TH 0xd40c
+#define USB_USB_TIMER 0xd428
+#define USB_RX_EARLY_TIMEOUT 0xd42c
+#define USB_RX_EARLY_SIZE 0xd42e
+#define USB_PM_CTRL_STATUS 0xd432 /* RTL8153A */
+#define USB_RX_EXTRA_AGGR_TMR 0xd432 /* RTL8153B */
+#define USB_TX_DMA 0xd434
+#define USB_UPT_RXDMA_OWN 0xd437
+#define USB_UPHY3_MDCMDIO 0xd480
+#define USB_TOLERANCE 0xd490
+#define USB_LPM_CTRL 0xd41a
+#define USB_BMU_RESET 0xd4b0
+#define USB_BMU_CONFIG 0xd4b4
+#define USB_U1U2_TIMER 0xd4da
+#define USB_FW_TASK 0xd4e8 /* RTL8153B */
+#define USB_RX_AGGR_NUM 0xd4ee
+#define USB_UPS_CTRL 0xd800
+#define USB_POWER_CUT 0xd80a
+#define USB_MISC_0 0xd81a
+#define USB_MISC_1 0xd81f
+#define USB_AFE_CTRL2 0xd824
+#define USB_UPHY_XTAL 0xd826
+#define USB_UPS_CFG 0xd842
+#define USB_UPS_FLAGS 0xd848
+#define USB_WDT1_CTRL 0xe404
+#define USB_WDT11_CTRL 0xe43c
+#define USB_BP_BA PLA_BP_BA
+#define USB_BP_0 PLA_BP_0
+#define USB_BP_1 PLA_BP_1
+#define USB_BP_2 PLA_BP_2
+#define USB_BP_3 PLA_BP_3
+#define USB_BP_4 PLA_BP_4
+#define USB_BP_5 PLA_BP_5
+#define USB_BP_6 PLA_BP_6
+#define USB_BP_7 PLA_BP_7
+#define USB_BP_EN PLA_BP_EN /* RTL8153A */
+#define USB_BP_8 0xfc38 /* RTL8153B */
+#define USB_BP_9 0xfc3a
+#define USB_BP_10 0xfc3c
+#define USB_BP_11 0xfc3e
+#define USB_BP_12 0xfc40
+#define USB_BP_13 0xfc42
+#define USB_BP_14 0xfc44
+#define USB_BP_15 0xfc46
+#define USB_BP2_EN 0xfc48
+
+/* OCP Registers */
+#define OCP_ALDPS_CONFIG 0x2010
+#define OCP_EEE_CONFIG1 0x2080
+#define OCP_EEE_CONFIG2 0x2092
+#define OCP_EEE_CONFIG3 0x2094
+#define OCP_BASE_MII 0xa400
+#define OCP_EEE_AR 0xa41a
+#define OCP_EEE_DATA 0xa41c
+#define OCP_PHY_STATUS 0xa420
+#define OCP_NCTL_CFG 0xa42c
+#define OCP_POWER_CFG 0xa430
+#define OCP_EEE_CFG 0xa432
+#define OCP_SRAM_ADDR 0xa436
+#define OCP_SRAM_DATA 0xa438
+#define OCP_DOWN_SPEED 0xa442
+#define OCP_EEE_ABLE 0xa5c4
+#define OCP_EEE_ADV 0xa5d0
+#define OCP_EEE_LPABLE 0xa5d2
+#define OCP_10GBT_CTRL 0xa5d4
+#define OCP_10GBT_STAT 0xa5d6
+#define OCP_EEE_ADV2 0xa6d4
+#define OCP_PHY_STATE 0xa708 /* nway state for 8153 */
+#define OCP_PHY_PATCH_STAT 0xb800
+#define OCP_PHY_PATCH_CMD 0xb820
+#define OCP_PHY_LOCK 0xb82e
+#define OCP_ADC_IOFFSET 0xbcfc
+#define OCP_ADC_CFG 0xbc06
+#define OCP_SYSCLK_CFG 0xc416
+
+/* SRAM Register */
+#define SRAM_GREEN_CFG 0x8011
+#define SRAM_LPF_CFG 0x8012
+#define SRAM_GPHY_FW_VER 0x801e
+#define SRAM_10M_AMP1 0x8080
+#define SRAM_10M_AMP2 0x8082
+#define SRAM_IMPEDANCE 0x8084
+#define SRAM_PHY_LOCK 0xb82e
+
+/* PLA_RCR */
+#define RCR_AAP 0x00000001
+#define RCR_APM 0x00000002
+#define RCR_AM 0x00000004
+#define RCR_AB 0x00000008
+#define RCR_ACPT_ALL (RCR_AAP | RCR_APM | RCR_AM | RCR_AB)
+#define SLOT_EN BIT(11)
+
+/* PLA_RCR1 */
+#define OUTER_VLAN BIT(7)
+#define INNER_VLAN BIT(6)
+
+/* PLA_RXFIFO_CTRL0 */
+#define RXFIFO_THR1_NORMAL 0x00080002
+#define RXFIFO_THR1_OOB 0x01800003
+
+/* PLA_RXFIFO_FULL */
+#define RXFIFO_FULL_MASK 0xfff
+
+/* PLA_RXFIFO_CTRL1 */
+#define RXFIFO_THR2_FULL 0x00000060
+#define RXFIFO_THR2_HIGH 0x00000038
+#define RXFIFO_THR2_OOB 0x0000004a
+#define RXFIFO_THR2_NORMAL 0x00a0
+
+/* PLA_RXFIFO_CTRL2 */
+#define RXFIFO_THR3_FULL 0x00000078
+#define RXFIFO_THR3_HIGH 0x00000048
+#define RXFIFO_THR3_OOB 0x0000005a
+#define RXFIFO_THR3_NORMAL 0x0110
+
+/* PLA_TXFIFO_CTRL */
+#define TXFIFO_THR_NORMAL 0x00400008
+#define TXFIFO_THR_NORMAL2 0x01000008
+
+/* PLA_DMY_REG0 */
+#define ECM_ALDPS 0x0002
+
+/* PLA_FMC */
+#define FMC_FCR_MCU_EN 0x0001
+
+/* PLA_EEEP_CR */
+#define EEEP_CR_EEEP_TX 0x0002
+
+/* PLA_WDT6_CTRL */
+#define WDT6_SET_MODE 0x0010
+
+/* PLA_TCR0 */
+#define TCR0_TX_EMPTY 0x0800
+#define TCR0_AUTO_FIFO 0x0080
+
+/* PLA_TCR1 */
+#define VERSION_MASK 0x7cf0
+#define IFG_MASK (BIT(3) | BIT(9) | BIT(8))
+#define IFG_144NS BIT(9)
+#define IFG_96NS (BIT(9) | BIT(8))
+
+/* PLA_MTPS */
+#define MTPS_JUMBO (12 * 1024 / 64)
+#define MTPS_DEFAULT (6 * 1024 / 64)
+
+/* PLA_RSTTALLY */
+#define TALLY_RESET 0x0001
+
+/* PLA_CR */
+#define CR_RST 0x10
+#define CR_RE 0x08
+#define CR_TE 0x04
+
+/* PLA_CRWECR */
+#define CRWECR_NORAML 0x00
+#define CRWECR_CONFIG 0xc0
+
+/* PLA_OOB_CTRL */
+#define NOW_IS_OOB 0x80
+#define TXFIFO_EMPTY 0x20
+#define RXFIFO_EMPTY 0x10
+#define LINK_LIST_READY 0x02
+#define DIS_MCU_CLROOB 0x01
+#define FIFO_EMPTY (TXFIFO_EMPTY | RXFIFO_EMPTY)
+
+/* PLA_MISC_1 */
+#define RXDY_GATED_EN 0x0008
+
+/* PLA_SFF_STS_7 */
+#define RE_INIT_LL 0x8000
+#define MCU_BORW_EN 0x4000
+
+/* PLA_CPCR */
+#define FLOW_CTRL_EN BIT(0)
+#define CPCR_RX_VLAN 0x0040
+
+/* PLA_CFG_WOL */
+#define MAGIC_EN 0x0001
+
+/* PLA_TEREDO_CFG */
+#define TEREDO_SEL 0x8000
+#define TEREDO_WAKE_MASK 0x7f00
+#define TEREDO_RS_EVENT_MASK 0x00fe
+#define OOB_TEREDO_EN 0x0001
+
+/* PLA_BDC_CR */
+#define ALDPS_PROXY_MODE 0x0001
+
+/* PLA_EFUSE_CMD */
+#define EFUSE_READ_CMD BIT(15)
+#define EFUSE_DATA_BIT16 BIT(7)
+
+/* PLA_CONFIG34 */
+#define LINK_ON_WAKE_EN 0x0010
+#define LINK_OFF_WAKE_EN 0x0008
+
+/* PLA_CONFIG6 */
+#define LANWAKE_CLR_EN BIT(0)
+
+/* PLA_USB_CFG */
+#define EN_XG_LIP BIT(1)
+#define EN_G_LIP BIT(2)
+
+/* PLA_CONFIG5 */
+#define BWF_EN 0x0040
+#define MWF_EN 0x0020
+#define UWF_EN 0x0010
+#define LAN_WAKE_EN 0x0002
+
+/* PLA_LED_FEATURE */
+#define LED_MODE_MASK 0x0700
+
+/* PLA_PHY_PWR */
+#define TX_10M_IDLE_EN 0x0080
+#define PFM_PWM_SWITCH 0x0040
+#define TEST_IO_OFF BIT(4)
+
+/* PLA_MAC_PWR_CTRL */
+#define D3_CLK_GATED_EN 0x00004000
+#define MCU_CLK_RATIO 0x07010f07
+#define MCU_CLK_RATIO_MASK 0x0f0f0f0f
+#define ALDPS_SPDWN_RATIO 0x0f87
+
+/* PLA_MAC_PWR_CTRL2 */
+#define EEE_SPDWN_RATIO 0x8007
+#define MAC_CLK_SPDWN_EN BIT(15)
+#define EEE_SPDWN_RATIO_MASK 0xff
+
+/* PLA_MAC_PWR_CTRL3 */
+#define PLA_MCU_SPDWN_EN BIT(14)
+#define PKT_AVAIL_SPDWN_EN 0x0100
+#define SUSPEND_SPDWN_EN 0x0004
+#define U1U2_SPDWN_EN 0x0002
+#define L1_SPDWN_EN 0x0001
+
+/* PLA_MAC_PWR_CTRL4 */
+#define PWRSAVE_SPDWN_EN 0x1000
+#define RXDV_SPDWN_EN 0x0800
+#define TX10MIDLE_EN 0x0100
+#define IDLE_SPDWN_EN BIT(6)
+#define TP100_SPDWN_EN 0x0020
+#define TP500_SPDWN_EN 0x0010
+#define TP1000_SPDWN_EN 0x0008
+#define EEE_SPDWN_EN 0x0001
+
+/* PLA_GPHY_INTR_IMR */
+#define GPHY_STS_MSK 0x0001
+#define SPEED_DOWN_MSK 0x0002
+#define SPDWN_RXDV_MSK 0x0004
+#define SPDWN_LINKCHG_MSK 0x0008
+
+/* PLA_PHYAR */
+#define PHYAR_FLAG 0x80000000
+
+/* PLA_EEE_CR */
+#define EEE_RX_EN 0x0001
+#define EEE_TX_EN 0x0002
+
+/* PLA_BOOT_CTRL */
+#define AUTOLOAD_DONE 0x0002
+
+/* PLA_LWAKE_CTRL_REG */
+#define LANWAKE_PIN BIT(7)
+
+/* PLA_SUSPEND_FLAG */
+#define LINK_CHG_EVENT BIT(0)
+
+/* PLA_INDICATE_FALG */
+#define UPCOMING_RUNTIME_D3 BIT(0)
+
+/* PLA_MACDBG_PRE and PLA_MACDBG_POST */
+#define DEBUG_OE BIT(0)
+#define DEBUG_LTSSM 0x0082
+
+/* PLA_EXTRA_STATUS */
+#define CUR_LINK_OK BIT(15)
+#define U3P3_CHECK_EN BIT(7) /* RTL_VER_05 only */
+#define LINK_CHANGE_FLAG BIT(8)
+#define POLL_LINK_CHG BIT(0)
+
+/* PLA_GPHY_CTRL */
+#define GPHY_FLASH BIT(1)
+
+/* PLA_POL_GPIO_CTRL */
+#define DACK_DET_EN BIT(15)
+#define POL_GPHY_PATCH BIT(4)
+
+/* USB_USB2PHY */
+#define USB2PHY_SUSPEND 0x0001
+#define USB2PHY_L1 0x0002
+
+/* USB_SSPHYLINK1 */
+#define DELAY_PHY_PWR_CHG BIT(1)
+
+/* USB_SSPHYLINK2 */
+#define pwd_dn_scale_mask 0x3ffe
+#define pwd_dn_scale(x) ((x) << 1)
+
+/* USB_CSR_DUMMY1 */
+#define DYNAMIC_BURST 0x0001
+
+/* USB_CSR_DUMMY2 */
+#define EP4_FULL_FC 0x0001
+
+/* USB_DEV_STAT */
+#define STAT_SPEED_MASK 0x0006
+#define STAT_SPEED_HIGH 0x0000
+#define STAT_SPEED_FULL 0x0002
+
+/* USB_FW_FIX_EN0 */
+#define FW_FIX_SUSPEND BIT(14)
+
+/* USB_FW_FIX_EN1 */
+#define FW_IP_RESET_EN BIT(9)
+
+/* USB_LPM_CONFIG */
+#define LPM_U1U2_EN BIT(0)
+
+/* USB_EFUSE */
+#define PASS_THRU_MASK BIT(0)
+
+/* USB_TX_AGG */
+#define TX_AGG_MAX_THRESHOLD 0x03
+
+/* USB_RX_BUF_TH */
+#define RX_THR_SUPPER 0x0c350180
+#define RX_THR_HIGH 0x7a120180
+#define RX_THR_SLOW 0xffff0180
+#define RX_THR_B 0x00010001
+
+/* USB_TX_DMA */
+#define TEST_MODE_DISABLE 0x00000001
+#define TX_SIZE_ADJUST1 0x00000100
+
+/* USB_BMU_RESET */
+#define BMU_RESET_EP_IN 0x01
+#define BMU_RESET_EP_OUT 0x02
+
+/* USB_BMU_CONFIG */
+#define ACT_ODMA BIT(1)
+
+/* USB_UPT_RXDMA_OWN */
+#define OWN_UPDATE BIT(0)
+#define OWN_CLEAR BIT(1)
+
+/* USB_FW_TASK */
+#define FC_PATCH_TASK BIT(1)
+
+/* USB_RX_AGGR_NUM */
+#define RX_AGGR_NUM_MASK 0x1ff
+
+/* USB_UPS_CTRL */
+#define POWER_CUT 0x0100
+
+/* USB_PM_CTRL_STATUS */
+#define RESUME_INDICATE 0x0001
+
+/* USB_ECM_OPTION */
+#define BYPASS_MAC_RESET BIT(5)
+
+/* USB_CSTMR */
+#define FORCE_SUPER BIT(0)
+
+/* USB_MISC_2 */
+#define UPS_FORCE_PWR_DOWN BIT(0)
+
+/* USB_ECM_OP */
+#define EN_ALL_SPEED BIT(0)
+
+/* USB_GPHY_CTRL */
+#define GPHY_PATCH_DONE BIT(2)
+#define BYPASS_FLASH BIT(5)
+#define BACKUP_RESTRORE BIT(6)
+
+/* USB_SPEED_OPTION */
+#define RG_PWRDN_EN BIT(8)
+#define ALL_SPEED_OFF BIT(9)
+
+/* USB_FW_CTRL */
+#define FLOW_CTRL_PATCH_OPT BIT(1)
+#define AUTO_SPEEDUP BIT(3)
+#define FLOW_CTRL_PATCH_2 BIT(8)
+
+/* USB_FC_TIMER */
+#define CTRL_TIMER_EN BIT(15)
+
+/* USB_USB_CTRL */
+#define CDC_ECM_EN BIT(3)
+#define RX_AGG_DISABLE 0x0010
+#define RX_ZERO_EN 0x0080
+
+/* USB_U2P3_CTRL */
+#define U2P3_ENABLE 0x0001
+#define RX_DETECT8 BIT(3)
+
+/* USB_POWER_CUT */
+#define PWR_EN 0x0001
+#define PHASE2_EN 0x0008
+#define UPS_EN BIT(4)
+#define USP_PREWAKE BIT(5)
+
+/* USB_MISC_0 */
+#define PCUT_STATUS 0x0001
+#define AD_MASK 0xfee0
+
+/* USB_MISC_1 */
+#define BD_MASK BIT(0)
+#define BND_MASK BIT(2)
+#define BL_MASK BIT(3)
+
+/* USB_RX_EARLY_TIMEOUT */
+#define COALESCE_SUPER 85000U
+#define COALESCE_HIGH 250000U
+#define COALESCE_SLOW 524280U
+
+/* USB_WDT1_CTRL */
+#define WTD1_EN BIT(0)
+
+/* USB_WDT11_CTRL */
+#define TIMER11_EN 0x0001
+
+/* USB_LPM_CTRL */
+/* bit 4 ~ 5: fifo empty boundary */
+#define FIFO_EMPTY_1FB 0x30 /* 0x1fb * 64 = 32448 bytes */
+/* bit 2 ~ 3: LMP timer */
+#define LPM_TIMER_MASK 0x0c
+#define LPM_TIMER_500MS 0x04 /* 500 ms */
+#define LPM_TIMER_500US 0x0c /* 500 us */
+#define ROK_EXIT_LPM 0x02
+
+/* USB_AFE_CTRL2 */
+#define SEN_VAL_MASK 0xf800
+#define SEN_VAL_NORMAL 0xa000
+#define SEL_RXIDLE 0x0100
+
+/* USB_UPHY_XTAL */
+#define OOBS_POLLING BIT(8)
+
+/* USB_UPS_CFG */
+#define SAW_CNT_1MS_MASK 0x0fff
+#define MID_REVERSE BIT(5) /* RTL8156A */
+
+/* USB_UPS_FLAGS */
+#define UPS_FLAGS_R_TUNE BIT(0)
+#define UPS_FLAGS_EN_10M_CKDIV BIT(1)
+#define UPS_FLAGS_250M_CKDIV BIT(2)
+#define UPS_FLAGS_EN_ALDPS BIT(3)
+#define UPS_FLAGS_CTAP_SHORT_DIS BIT(4)
+#define UPS_FLAGS_SPEED_MASK (0xf << 16)
+#define ups_flags_speed(x) ((x) << 16)
+#define UPS_FLAGS_EN_EEE BIT(20)
+#define UPS_FLAGS_EN_500M_EEE BIT(21)
+#define UPS_FLAGS_EN_EEE_CKDIV BIT(22)
+#define UPS_FLAGS_EEE_PLLOFF_100 BIT(23)
+#define UPS_FLAGS_EEE_PLLOFF_GIGA BIT(24)
+#define UPS_FLAGS_EEE_CMOD_LV_EN BIT(25)
+#define UPS_FLAGS_EN_GREEN BIT(26)
+#define UPS_FLAGS_EN_FLOW_CTR BIT(27)
+
+enum spd_duplex {
+ NWAY_10M_HALF,
+ NWAY_10M_FULL,
+ NWAY_100M_HALF,
+ NWAY_100M_FULL,
+ NWAY_1000M_FULL,
+ FORCE_10M_HALF,
+ FORCE_10M_FULL,
+ FORCE_100M_HALF,
+ FORCE_100M_FULL,
+ FORCE_1000M_FULL,
+ NWAY_2500M_FULL,
+};
+
+/* OCP_ALDPS_CONFIG */
+#define ENPWRSAVE 0x8000
+#define ENPDNPS 0x0200
+#define LINKENA 0x0100
+#define DIS_SDSAVE 0x0010
+
+/* OCP_PHY_STATUS */
+#define PHY_STAT_MASK 0x0007
+#define PHY_STAT_EXT_INIT 2
+#define PHY_STAT_LAN_ON 3
+#define PHY_STAT_PWRDN 5
+
+/* OCP_NCTL_CFG */
+#define PGA_RETURN_EN BIT(1)
+
+/* OCP_POWER_CFG */
+#define EEE_CLKDIV_EN 0x8000
+#define EN_ALDPS 0x0004
+#define EN_10M_PLLOFF 0x0001
+
+/* OCP_EEE_CONFIG1 */
+#define RG_TXLPI_MSK_HFDUP 0x8000
+#define RG_MATCLR_EN 0x4000
+#define EEE_10_CAP 0x2000
+#define EEE_NWAY_EN 0x1000
+#define TX_QUIET_EN 0x0200
+#define RX_QUIET_EN 0x0100
+#define sd_rise_time_mask 0x0070
+#define sd_rise_time(x) (min(x, 7) << 4) /* bit 4 ~ 6 */
+#define RG_RXLPI_MSK_HFDUP 0x0008
+#define SDFALLTIME 0x0007 /* bit 0 ~ 2 */
+
+/* OCP_EEE_CONFIG2 */
+#define RG_LPIHYS_NUM 0x7000 /* bit 12 ~ 15 */
+#define RG_DACQUIET_EN 0x0400
+#define RG_LDVQUIET_EN 0x0200
+#define RG_CKRSEL 0x0020
+#define RG_EEEPRG_EN 0x0010
+
+/* OCP_EEE_CONFIG3 */
+#define fast_snr_mask 0xff80
+#define fast_snr(x) (min(x, 0x1ff) << 7) /* bit 7 ~ 15 */
+#define RG_LFS_SEL 0x0060 /* bit 6 ~ 5 */
+#define MSK_PH 0x0006 /* bit 0 ~ 3 */
+
+/* OCP_EEE_AR */
+/* bit[15:14] function */
+#define FUN_ADDR 0x0000
+#define FUN_DATA 0x4000
+/* bit[4:0] device addr */
+
+/* OCP_EEE_CFG */
+#define CTAP_SHORT_EN 0x0040
+#define EEE10_EN 0x0010
+
+/* OCP_DOWN_SPEED */
+#define EN_EEE_CMODE BIT(14)
+#define EN_EEE_1000 BIT(13)
+#define EN_EEE_100 BIT(12)
+#define EN_10M_CLKDIV BIT(11)
+#define EN_10M_BGOFF 0x0080
+
+/* OCP_10GBT_CTRL */
+#define RTL_ADV2_5G_F_R BIT(5) /* Advertise 2.5GBASE-T fast-retrain */
+
+/* OCP_PHY_STATE */
+#define TXDIS_STATE 0x01
+#define ABD_STATE 0x02
+
+/* OCP_PHY_PATCH_STAT */
+#define PATCH_READY BIT(6)
+
+/* OCP_PHY_PATCH_CMD */
+#define PATCH_REQUEST BIT(4)
+
+/* OCP_PHY_LOCK */
+#define PATCH_LOCK BIT(0)
+
+/* OCP_ADC_CFG */
+#define CKADSEL_L 0x0100
+#define ADC_EN 0x0080
+#define EN_EMI_L 0x0040
+
+/* OCP_SYSCLK_CFG */
+#define sysclk_div_expo(x) (min(x, 5) << 8)
+#define clk_div_expo(x) (min(x, 5) << 4)
+
+/* SRAM_GREEN_CFG */
+#define GREEN_ETH_EN BIT(15)
+#define R_TUNE_EN BIT(11)
+
+/* SRAM_LPF_CFG */
+#define LPF_AUTO_TUNE 0x8000
+
+/* SRAM_10M_AMP1 */
+#define GDAC_IB_UPALL 0x0008
+
+/* SRAM_10M_AMP2 */
+#define AMP_DN 0x0200
+
+/* SRAM_IMPEDANCE */
+#define RX_DRIVING_MASK 0x6000
+
+/* SRAM_PHY_LOCK */
+#define PHY_PATCH_LOCK 0x0001
+
+#define RTL8152_MAX_TX 4
+#define RTL8152_MAX_RX 10
+
+struct r8152;
+
+struct rx_agg {
+ struct list_head list, info_list;
+ struct urb *urb;
+ struct r8152 *context;
+ struct page *page;
+ void *buffer;
+};
+
+struct tx_agg {
+ struct list_head list;
+ struct urb *urb;
+ struct r8152 *context;
+ void *buffer;
+ void *head;
+ u32 skb_num;
+ u32 skb_len;
+};
+
+struct r8152 {
+ unsigned long flags;
+ struct usb_device *udev;
+ struct napi_struct napi;
+ struct usb_interface *intf;
+ struct net_device *netdev;
+ struct urb *intr_urb;
+ struct tx_agg tx_info[RTL8152_MAX_TX];
+ struct list_head rx_info, rx_used;
+ struct list_head rx_done, tx_free;
+ struct sk_buff_head tx_queue, rx_queue;
+ spinlock_t rx_lock, tx_lock;
+ struct delayed_work schedule, hw_phy_work;
+ struct mii_if_info mii;
+ struct mutex control; /* use for hw setting */
+#ifdef CONFIG_PM_SLEEP
+ struct notifier_block pm_notifier;
+#endif
+ struct tasklet_struct tx_tl;
+
+ struct rtl_ops {
+ void (*init)(struct r8152 *tp);
+ int (*enable)(struct r8152 *tp);
+ void (*disable)(struct r8152 *tp);
+ void (*up)(struct r8152 *tp);
+ void (*down)(struct r8152 *tp);
+ void (*unload)(struct r8152 *tp);
+ int (*eee_get)(struct r8152 *tp, struct ethtool_eee *eee);
+ int (*eee_set)(struct r8152 *tp, struct ethtool_eee *eee);
+ bool (*in_nway)(struct r8152 *tp);
+ void (*hw_phy_cfg)(struct r8152 *tp);
+ void (*autosuspend_en)(struct r8152 *tp, bool enable);
+ void (*change_mtu)(struct r8152 *tp);
+ } rtl_ops;
+
+ struct ups_info {
+ u32 r_tune:1;
+ u32 _10m_ckdiv:1;
+ u32 _250m_ckdiv:1;
+ u32 aldps:1;
+ u32 lite_mode:2;
+ u32 speed_duplex:4;
+ u32 eee:1;
+ u32 eee_lite:1;
+ u32 eee_ckdiv:1;
+ u32 eee_plloff_100:1;
+ u32 eee_plloff_giga:1;
+ u32 eee_cmod_lv:1;
+ u32 green:1;
+ u32 flow_control:1;
+ u32 ctap_short_off:1;
+ } ups_info;
+
+#define RTL_VER_SIZE 32
+
+ struct rtl_fw {
+ const char *fw_name;
+ const struct firmware *fw;
+
+ char version[RTL_VER_SIZE];
+ int (*pre_fw)(struct r8152 *tp);
+ int (*post_fw)(struct r8152 *tp);
+
+ bool retry;
+ } rtl_fw;
+
+ atomic_t rx_count;
+
+ bool eee_en;
+ int intr_interval;
+ u32 saved_wolopts;
+ u32 msg_enable;
+ u32 tx_qlen;
+ u32 coalesce;
+ u32 advertising;
+ u32 rx_buf_sz;
+ u32 rx_copybreak;
+ u32 rx_pending;
+ u32 fc_pause_on, fc_pause_off;
+
+ unsigned int pipe_in, pipe_out, pipe_intr, pipe_ctrl_in, pipe_ctrl_out;
+
+ u32 support_2500full:1;
+ u32 lenovo_macpassthru:1;
+ u32 dell_tb_rx_agg_bug:1;
+ u16 ocp_base;
+ u16 speed;
+ u16 eee_adv;
+ u8 *intr_buff;
+ u8 version;
+ u8 duplex;
+ u8 autoneg;
+};
+
+enum rtl_version {
+ RTL_VER_UNKNOWN = 0,
+ RTL_VER_01,
+ RTL_VER_02,
+ RTL_VER_03,
+ RTL_VER_04,
+ RTL_VER_05,
+ RTL_VER_06,
+ RTL_VER_07,
+ RTL_VER_08,
+ RTL_VER_09,
+
+ RTL_TEST_01,
+ RTL_VER_10,
+ RTL_VER_11,
+ RTL_VER_12,
+ RTL_VER_13,
+ RTL_VER_14,
+ RTL_VER_15,
+
+ RTL_VER_MAX
+};
+
+#define FIRMWARE_8153A_2 "rtl_nic/rtl8153a-2.fw"
+#define FIRMWARE_8153A_3 "rtl_nic/rtl8153a-3.fw"
+#define FIRMWARE_8153A_4 "rtl_nic/rtl8153a-4.fw"
+#define FIRMWARE_8153B_2 "rtl_nic/rtl8153b-2.fw"
+#define FIRMWARE_8153C_1 "rtl_nic/rtl8153c-1.fw"
+#define FIRMWARE_8156A_2 "rtl_nic/rtl8156a-2.fw"
+#define FIRMWARE_8156B_2 "rtl_nic/rtl8156b-2.fw"
+
+int generic_ocp_read(struct r8152 *tp, u16 index, u16 size, void *data, u16 type);
+int generic_ocp_write(struct r8152 *tp, u16 index, u16 byteen, u16 size, void *data, u16 type);
+u32 ocp_read_dword(struct r8152 *tp, u16 type, u16 index);
+u16 ocp_read_word(struct r8152 *tp, u16 type, u16 index);
+u8 ocp_read_byte(struct r8152 *tp, u16 type, u16 index);
+void ocp_write_dword(struct r8152 *tp, u16 type, u16 index, u32 data);
+void ocp_write_word(struct r8152 *tp, u16 type, u16 index, u32 data);
+void ocp_write_byte(struct r8152 *tp, u16 type, u16 index, u32 data);
+
+u16 ocp_reg_read(struct r8152 *tp, u16 addr);
+void ocp_reg_write(struct r8152 *tp, u16 addr, u16 data);
+void sram_write(struct r8152 *tp, u16 addr, u16 data);
+u16 sram_read(struct r8152 *tp, u16 addr);
+
+int rtl_phy_patch_request(struct r8152 *tp, bool request, bool wait);
+
+void rtl8152_apply_firmware(struct r8152 *tp, bool power_cut);
+void rtl8152_release_firmware(struct r8152 *tp);
+int rtl8152_request_firmware(struct r8152 *tp);
+int rtl_fw_init(struct r8152 *tp);
+
+#endif /* LINUX_R8152_BASIC_H */
diff --git a/drivers/net/usb/realtek/r8152_fw.c b/drivers/net/usb/realtek/r8152_fw.c
new file mode 100644
index 000000000000..1c368e3a0bc8
--- /dev/null
+++ b/drivers/net/usb/realtek/r8152_fw.c
@@ -0,0 +1,1557 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2021 Realtek Semiconductor Corp. All rights reserved.
+ */
+
+#include <linux/netdevice.h>
+#include <linux/usb.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/firmware.h>
+#include <linux/usb/r8152.h>
+#include <crypto/hash.h>
+#include "r8152_basic.h"
+
+/**
+ * struct fw_block - block type and total length
+ * @type: type of the current block, such as RTL_FW_END, RTL_FW_PLA,
+ * RTL_FW_USB and so on.
+ * @length: total length of the current block.
+ */
+struct fw_block {
+ __le32 type;
+ __le32 length;
+} __packed;
+
+/**
+ * struct fw_header - header of the firmware file
+ * @checksum: checksum of sha256 which is calculated from the whole file
+ * except the checksum field of the file. That is, calculate sha256
+ * from the version field to the end of the file.
+ * @version: version of this firmware.
+ * @blocks: the first firmware block of the file
+ */
+struct fw_header {
+ u8 checksum[32];
+ char version[RTL_VER_SIZE];
+ struct fw_block blocks[];
+} __packed;
+
+enum rtl8152_fw_flags {
+ FW_FLAGS_USB = 0,
+ FW_FLAGS_PLA,
+ FW_FLAGS_START,
+ FW_FLAGS_STOP,
+ FW_FLAGS_NC,
+ FW_FLAGS_NC1,
+ FW_FLAGS_NC2,
+ FW_FLAGS_UC2,
+ FW_FLAGS_UC,
+ FW_FLAGS_SPEED_UP,
+ FW_FLAGS_VER,
+};
+
+enum rtl8152_fw_fixup_cmd {
+ FW_FIXUP_AND = 0,
+ FW_FIXUP_OR,
+ FW_FIXUP_NOT,
+ FW_FIXUP_XOR,
+};
+
+struct fw_phy_set {
+ __le16 addr;
+ __le16 data;
+} __packed;
+
+struct fw_phy_speed_up {
+ struct fw_block blk_hdr;
+ __le16 fw_offset;
+ __le16 version;
+ __le16 fw_reg;
+ __le16 reserved;
+ char info[];
+} __packed;
+
+struct fw_phy_ver {
+ struct fw_block blk_hdr;
+ struct fw_phy_set ver;
+ __le32 reserved;
+} __packed;
+
+struct fw_phy_fixup {
+ struct fw_block blk_hdr;
+ struct fw_phy_set setting;
+ __le16 bit_cmd;
+ __le16 reserved;
+} __packed;
+
+struct fw_phy_union {
+ struct fw_block blk_hdr;
+ __le16 fw_offset;
+ __le16 fw_reg;
+ struct fw_phy_set pre_set[2];
+ struct fw_phy_set bp[8];
+ struct fw_phy_set bp_en;
+ u8 pre_num;
+ u8 bp_num;
+ char info[];
+} __packed;
+
+/**
+ * struct fw_mac - a firmware block used by RTL_FW_PLA and RTL_FW_USB.
+ * The layout of the firmware block is:
+ * <struct fw_mac> + <info> + <firmware data>.
+ * @blk_hdr: firmware descriptor (type, length)
+ * @fw_offset: offset of the firmware binary data. The start address of
+ * the data would be the address of struct fw_mac + @fw_offset.
+ * @fw_reg: the register to load the firmware. Depends on chip.
+ * @bp_ba_addr: the register to write break point base address. Depends on
+ * chip.
+ * @bp_ba_value: break point base address. Depends on chip.
+ * @bp_en_addr: the register to write break point enabled mask. Depends
+ * on chip.
+ * @bp_en_value: break point enabled mask. Depends on the firmware.
+ * @bp_start: the start register of break points. Depends on chip.
+ * @bp_num: the break point number which needs to be set for this firmware.
+ * Depends on the firmware.
+ * @bp: break points. Depends on firmware.
+ * @reserved: reserved space (unused)
+ * @fw_ver_reg: the register to store the fw version.
+ * @fw_ver_data: the firmware version of the current type.
+ * @info: additional information for debugging, and is followed by the
+ * binary data of firmware.
+ */
+struct fw_mac {
+ struct fw_block blk_hdr;
+ __le16 fw_offset;
+ __le16 fw_reg;
+ __le16 bp_ba_addr;
+ __le16 bp_ba_value;
+ __le16 bp_en_addr;
+ __le16 bp_en_value;
+ __le16 bp_start;
+ __le16 bp_num;
+ __le16 bp[16]; /* any value determined by firmware */
+ __le32 reserved;
+ __le16 fw_ver_reg;
+ u8 fw_ver_data;
+ char info[];
+} __packed;
+
+/**
+ * struct fw_phy_patch_key - a firmware block used by RTL_FW_PHY_START.
+ * This is used to set patch key when loading the firmware of PHY.
+ * @blk_hdr: firmware descriptor (type, length)
+ * @key_reg: the register to write the patch key.
+ * @key_data: patch key.
+ * @reserved: reserved space (unused)
+ */
+struct fw_phy_patch_key {
+ struct fw_block blk_hdr;
+ __le16 key_reg;
+ __le16 key_data;
+ __le32 reserved;
+} __packed;
+
+/**
+ * struct fw_phy_nc - a firmware block used by RTL_FW_PHY_NC.
+ * The layout of the firmware block is:
+ * <struct fw_phy_nc> + <info> + <firmware data>.
+ * @blk_hdr: firmware descriptor (type, length)
+ * @fw_offset: offset of the firmware binary data. The start address of
+ * the data would be the address of struct fw_phy_nc + @fw_offset.
+ * @fw_reg: the register to load the firmware. Depends on chip.
+ * @ba_reg: the register to write the base address. Depends on chip.
+ * @ba_data: base address. Depends on chip.
+ * @patch_en_addr: the register of enabling patch mode. Depends on chip.
+ * @patch_en_value: patch mode enabled mask. Depends on the firmware.
+ * @mode_reg: the regitster of switching the mode.
+ * @mode_pre: the mode needing to be set before loading the firmware.
+ * @mode_post: the mode to be set when finishing to load the firmware.
+ * @reserved: reserved space (unused)
+ * @bp_start: the start register of break points. Depends on chip.
+ * @bp_num: the break point number which needs to be set for this firmware.
+ * Depends on the firmware.
+ * @bp: break points. Depends on firmware.
+ * @info: additional information for debugging, and is followed by the
+ * binary data of firmware.
+ */
+struct fw_phy_nc {
+ struct fw_block blk_hdr;
+ __le16 fw_offset;
+ __le16 fw_reg;
+ __le16 ba_reg;
+ __le16 ba_data;
+ __le16 patch_en_addr;
+ __le16 patch_en_value;
+ __le16 mode_reg;
+ __le16 mode_pre;
+ __le16 mode_post;
+ __le16 reserved;
+ __le16 bp_start;
+ __le16 bp_num;
+ __le16 bp[4];
+ char info[];
+} __packed;
+
+enum rtl_fw_type {
+ RTL_FW_END = 0,
+ RTL_FW_PLA,
+ RTL_FW_USB,
+ RTL_FW_PHY_START,
+ RTL_FW_PHY_STOP,
+ RTL_FW_PHY_NC,
+ RTL_FW_PHY_FIXUP,
+ RTL_FW_PHY_UNION_NC,
+ RTL_FW_PHY_UNION_NC1,
+ RTL_FW_PHY_UNION_NC2,
+ RTL_FW_PHY_UNION_UC2,
+ RTL_FW_PHY_UNION_UC,
+ RTL_FW_PHY_UNION_MISC,
+ RTL_FW_PHY_SPEED_UP,
+ RTL_FW_PHY_VER,
+};
+
+static void rtl_patch_key_set(struct r8152 *tp, u16 key_addr, u16 patch_key)
+{
+ if (patch_key && key_addr) {
+ sram_write(tp, key_addr, patch_key);
+ sram_write(tp, SRAM_PHY_LOCK, PHY_PATCH_LOCK);
+ } else if (key_addr) {
+ u16 data;
+
+ sram_write(tp, 0x0000, 0x0000);
+
+ data = ocp_reg_read(tp, OCP_PHY_LOCK);
+ data &= ~PATCH_LOCK;
+ ocp_reg_write(tp, OCP_PHY_LOCK, data);
+
+ sram_write(tp, key_addr, 0x0000);
+ } else {
+ WARN_ON_ONCE(1);
+ }
+}
+
+static int rtl_pre_ram_code(struct r8152 *tp, u16 key_addr, u16 patch_key, bool wait)
+{
+ if (rtl_phy_patch_request(tp, true, wait))
+ return -ETIME;
+
+ rtl_patch_key_set(tp, key_addr, patch_key);
+
+ return 0;
+}
+
+static int rtl_post_ram_code(struct r8152 *tp, u16 key_addr, bool wait)
+{
+ rtl_patch_key_set(tp, key_addr, 0);
+
+ rtl_phy_patch_request(tp, false, wait);
+
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, tp->ocp_base);
+
+ return 0;
+}
+
+/* Clear the bp to stop the firmware before loading a new one */
+static void rtl_clear_bp(struct r8152 *tp, u16 type)
+{
+ switch (tp->version) {
+ case RTL_VER_01:
+ case RTL_VER_02:
+ case RTL_VER_07:
+ break;
+ case RTL_VER_03:
+ case RTL_VER_04:
+ case RTL_VER_05:
+ case RTL_VER_06:
+ ocp_write_byte(tp, type, PLA_BP_EN, 0);
+ break;
+ case RTL_VER_08:
+ case RTL_VER_09:
+ case RTL_VER_10:
+ case RTL_VER_11:
+ case RTL_VER_12:
+ case RTL_VER_13:
+ case RTL_VER_14:
+ case RTL_VER_15:
+ default:
+ if (type == MCU_TYPE_USB) {
+ ocp_write_byte(tp, MCU_TYPE_USB, USB_BP2_EN, 0);
+
+ ocp_write_word(tp, MCU_TYPE_USB, USB_BP_8, 0);
+ ocp_write_word(tp, MCU_TYPE_USB, USB_BP_9, 0);
+ ocp_write_word(tp, MCU_TYPE_USB, USB_BP_10, 0);
+ ocp_write_word(tp, MCU_TYPE_USB, USB_BP_11, 0);
+ ocp_write_word(tp, MCU_TYPE_USB, USB_BP_12, 0);
+ ocp_write_word(tp, MCU_TYPE_USB, USB_BP_13, 0);
+ ocp_write_word(tp, MCU_TYPE_USB, USB_BP_14, 0);
+ ocp_write_word(tp, MCU_TYPE_USB, USB_BP_15, 0);
+ } else {
+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_BP_EN, 0);
+ }
+ break;
+ }
+
+ ocp_write_word(tp, type, PLA_BP_0, 0);
+ ocp_write_word(tp, type, PLA_BP_1, 0);
+ ocp_write_word(tp, type, PLA_BP_2, 0);
+ ocp_write_word(tp, type, PLA_BP_3, 0);
+ ocp_write_word(tp, type, PLA_BP_4, 0);
+ ocp_write_word(tp, type, PLA_BP_5, 0);
+ ocp_write_word(tp, type, PLA_BP_6, 0);
+ ocp_write_word(tp, type, PLA_BP_7, 0);
+
+ /* wait 3 ms to make sure the firmware is stopped */
+ usleep_range(3000, 6000);
+ ocp_write_word(tp, type, PLA_BP_BA, 0);
+}
+
+static bool rtl8152_is_fw_phy_speed_up_ok(struct r8152 *tp, struct fw_phy_speed_up *phy)
+{
+ u16 fw_offset;
+ u32 length;
+ bool rc = false;
+
+ switch (tp->version) {
+ case RTL_VER_01:
+ case RTL_VER_02:
+ case RTL_VER_03:
+ case RTL_VER_04:
+ case RTL_VER_05:
+ case RTL_VER_06:
+ case RTL_VER_07:
+ case RTL_VER_08:
+ case RTL_VER_09:
+ case RTL_VER_10:
+ case RTL_VER_11:
+ case RTL_VER_12:
+ case RTL_VER_14:
+ goto out;
+ case RTL_VER_13:
+ case RTL_VER_15:
+ default:
+ break;
+ }
+
+ fw_offset = __le16_to_cpu(phy->fw_offset);
+ length = __le32_to_cpu(phy->blk_hdr.length);
+ if (fw_offset < sizeof(*phy) || length <= fw_offset) {
+ dev_err(&tp->intf->dev, "invalid fw_offset\n");
+ goto out;
+ }
+
+ length -= fw_offset;
+ if (length & 3) {
+ dev_err(&tp->intf->dev, "invalid block length\n");
+ goto out;
+ }
+
+ if (__le16_to_cpu(phy->fw_reg) != 0x9A00) {
+ dev_err(&tp->intf->dev, "invalid register to load firmware\n");
+ goto out;
+ }
+
+ rc = true;
+out:
+ return rc;
+}
+
+static bool rtl8152_is_fw_phy_ver_ok(struct r8152 *tp, struct fw_phy_ver *ver)
+{
+ bool rc = false;
+
+ switch (tp->version) {
+ case RTL_VER_10:
+ case RTL_VER_11:
+ case RTL_VER_12:
+ case RTL_VER_13:
+ case RTL_VER_15:
+ break;
+ default:
+ goto out;
+ }
+
+ if (__le32_to_cpu(ver->blk_hdr.length) != sizeof(*ver)) {
+ dev_err(&tp->intf->dev, "invalid block length\n");
+ goto out;
+ }
+
+ if (__le16_to_cpu(ver->ver.addr) != SRAM_GPHY_FW_VER) {
+ dev_err(&tp->intf->dev, "invalid phy ver addr\n");
+ goto out;
+ }
+
+ rc = true;
+out:
+ return rc;
+}
+
+static bool rtl8152_is_fw_phy_fixup_ok(struct r8152 *tp, struct fw_phy_fixup *fix)
+{
+ bool rc = false;
+
+ switch (tp->version) {
+ case RTL_VER_10:
+ case RTL_VER_11:
+ case RTL_VER_12:
+ case RTL_VER_13:
+ case RTL_VER_15:
+ break;
+ default:
+ goto out;
+ }
+
+ if (__le32_to_cpu(fix->blk_hdr.length) != sizeof(*fix)) {
+ dev_err(&tp->intf->dev, "invalid block length\n");
+ goto out;
+ }
+
+ if (__le16_to_cpu(fix->setting.addr) != OCP_PHY_PATCH_CMD ||
+ __le16_to_cpu(fix->setting.data) != BIT(7)) {
+ dev_err(&tp->intf->dev, "invalid phy fixup\n");
+ goto out;
+ }
+
+ rc = true;
+out:
+ return rc;
+}
+
+static bool rtl8152_is_fw_phy_union_ok(struct r8152 *tp, struct fw_phy_union *phy)
+{
+ u16 fw_offset;
+ u32 length;
+ bool rc = false;
+
+ switch (tp->version) {
+ case RTL_VER_10:
+ case RTL_VER_11:
+ case RTL_VER_12:
+ case RTL_VER_13:
+ case RTL_VER_15:
+ break;
+ default:
+ goto out;
+ }
+
+ fw_offset = __le16_to_cpu(phy->fw_offset);
+ length = __le32_to_cpu(phy->blk_hdr.length);
+ if (fw_offset < sizeof(*phy) || length <= fw_offset) {
+ dev_err(&tp->intf->dev, "invalid fw_offset\n");
+ goto out;
+ }
+
+ length -= fw_offset;
+ if (length & 1) {
+ dev_err(&tp->intf->dev, "invalid block length\n");
+ goto out;
+ }
+
+ if (phy->pre_num > 2) {
+ dev_err(&tp->intf->dev, "invalid pre_num %d\n", phy->pre_num);
+ goto out;
+ }
+
+ if (phy->bp_num > 8) {
+ dev_err(&tp->intf->dev, "invalid bp_num %d\n", phy->bp_num);
+ goto out;
+ }
+
+ rc = true;
+out:
+ return rc;
+}
+
+static bool rtl8152_is_fw_phy_nc_ok(struct r8152 *tp, struct fw_phy_nc *phy)
+{
+ u32 length;
+ u16 fw_offset, fw_reg, ba_reg, patch_en_addr, mode_reg, bp_start;
+ bool rc = false;
+
+ switch (tp->version) {
+ case RTL_VER_04:
+ case RTL_VER_05:
+ case RTL_VER_06:
+ fw_reg = 0xa014;
+ ba_reg = 0xa012;
+ patch_en_addr = 0xa01a;
+ mode_reg = 0xb820;
+ bp_start = 0xa000;
+ break;
+ default:
+ goto out;
+ }
+
+ fw_offset = __le16_to_cpu(phy->fw_offset);
+ if (fw_offset < sizeof(*phy)) {
+ dev_err(&tp->intf->dev, "fw_offset too small\n");
+ goto out;
+ }
+
+ length = __le32_to_cpu(phy->blk_hdr.length);
+ if (length < fw_offset) {
+ dev_err(&tp->intf->dev, "invalid fw_offset\n");
+ goto out;
+ }
+
+ length -= __le16_to_cpu(phy->fw_offset);
+ if (!length || (length & 1)) {
+ dev_err(&tp->intf->dev, "invalid block length\n");
+ goto out;
+ }
+
+ if (__le16_to_cpu(phy->fw_reg) != fw_reg) {
+ dev_err(&tp->intf->dev, "invalid register to load firmware\n");
+ goto out;
+ }
+
+ if (__le16_to_cpu(phy->ba_reg) != ba_reg) {
+ dev_err(&tp->intf->dev, "invalid base address register\n");
+ goto out;
+ }
+
+ if (__le16_to_cpu(phy->patch_en_addr) != patch_en_addr) {
+ dev_err(&tp->intf->dev,
+ "invalid patch mode enabled register\n");
+ goto out;
+ }
+
+ if (__le16_to_cpu(phy->mode_reg) != mode_reg) {
+ dev_err(&tp->intf->dev,
+ "invalid register to switch the mode\n");
+ goto out;
+ }
+
+ if (__le16_to_cpu(phy->bp_start) != bp_start) {
+ dev_err(&tp->intf->dev,
+ "invalid start register of break point\n");
+ goto out;
+ }
+
+ if (__le16_to_cpu(phy->bp_num) > 4) {
+ dev_err(&tp->intf->dev, "invalid break point number\n");
+ goto out;
+ }
+
+ rc = true;
+out:
+ return rc;
+}
+
+static bool rtl8152_is_fw_mac_ok(struct r8152 *tp, struct fw_mac *mac)
+{
+ u16 fw_reg, bp_ba_addr, bp_en_addr, bp_start, fw_offset;
+ bool rc = false;
+ u32 length, type;
+ int i, max_bp;
+
+ type = __le32_to_cpu(mac->blk_hdr.type);
+ if (type == RTL_FW_PLA) {
+ switch (tp->version) {
+ case RTL_VER_01:
+ case RTL_VER_02:
+ case RTL_VER_07:
+ fw_reg = 0xf800;
+ bp_ba_addr = PLA_BP_BA;
+ bp_en_addr = 0;
+ bp_start = PLA_BP_0;
+ max_bp = 8;
+ break;
+ case RTL_VER_03:
+ case RTL_VER_04:
+ case RTL_VER_05:
+ case RTL_VER_06:
+ case RTL_VER_08:
+ case RTL_VER_09:
+ case RTL_VER_11:
+ case RTL_VER_12:
+ case RTL_VER_13:
+ case RTL_VER_14:
+ case RTL_VER_15:
+ fw_reg = 0xf800;
+ bp_ba_addr = PLA_BP_BA;
+ bp_en_addr = PLA_BP_EN;
+ bp_start = PLA_BP_0;
+ max_bp = 8;
+ break;
+ default:
+ goto out;
+ }
+ } else if (type == RTL_FW_USB) {
+ switch (tp->version) {
+ case RTL_VER_03:
+ case RTL_VER_04:
+ case RTL_VER_05:
+ case RTL_VER_06:
+ fw_reg = 0xf800;
+ bp_ba_addr = USB_BP_BA;
+ bp_en_addr = USB_BP_EN;
+ bp_start = USB_BP_0;
+ max_bp = 8;
+ break;
+ case RTL_VER_08:
+ case RTL_VER_09:
+ case RTL_VER_11:
+ case RTL_VER_12:
+ case RTL_VER_13:
+ case RTL_VER_14:
+ case RTL_VER_15:
+ fw_reg = 0xe600;
+ bp_ba_addr = USB_BP_BA;
+ bp_en_addr = USB_BP2_EN;
+ bp_start = USB_BP_0;
+ max_bp = 16;
+ break;
+ case RTL_VER_01:
+ case RTL_VER_02:
+ case RTL_VER_07:
+ default:
+ goto out;
+ }
+ } else {
+ goto out;
+ }
+
+ fw_offset = __le16_to_cpu(mac->fw_offset);
+ if (fw_offset < sizeof(*mac)) {
+ dev_err(&tp->intf->dev, "fw_offset too small\n");
+ goto out;
+ }
+
+ length = __le32_to_cpu(mac->blk_hdr.length);
+ if (length < fw_offset) {
+ dev_err(&tp->intf->dev, "invalid fw_offset\n");
+ goto out;
+ }
+
+ length -= fw_offset;
+ if (length < 4 || (length & 3)) {
+ dev_err(&tp->intf->dev, "invalid block length\n");
+ goto out;
+ }
+
+ if (__le16_to_cpu(mac->fw_reg) != fw_reg) {
+ dev_err(&tp->intf->dev, "invalid register to load firmware\n");
+ goto out;
+ }
+
+ if (__le16_to_cpu(mac->bp_ba_addr) != bp_ba_addr) {
+ dev_err(&tp->intf->dev, "invalid base address register\n");
+ goto out;
+ }
+
+ if (__le16_to_cpu(mac->bp_en_addr) != bp_en_addr) {
+ dev_err(&tp->intf->dev, "invalid enabled mask register\n");
+ goto out;
+ }
+
+ if (__le16_to_cpu(mac->bp_start) != bp_start) {
+ dev_err(&tp->intf->dev,
+ "invalid start register of break point\n");
+ goto out;
+ }
+
+ if (__le16_to_cpu(mac->bp_num) > max_bp) {
+ dev_err(&tp->intf->dev, "invalid break point number\n");
+ goto out;
+ }
+
+ for (i = __le16_to_cpu(mac->bp_num); i < max_bp; i++) {
+ if (mac->bp[i]) {
+ dev_err(&tp->intf->dev, "unused bp%u is not zero\n", i);
+ goto out;
+ }
+ }
+
+ rc = true;
+out:
+ return rc;
+}
+
+/* Verify the checksum for the firmware file. It is calculated from the version
+ * field to the end of the file. Compare the result with the checksum field to
+ * make sure the file is correct.
+ */
+static long rtl8152_fw_verify_checksum(struct r8152 *tp,
+ struct fw_header *fw_hdr, size_t size)
+{
+ unsigned char checksum[sizeof(fw_hdr->checksum)];
+ struct crypto_shash *alg;
+ struct shash_desc *sdesc;
+ size_t len;
+ long rc;
+
+ alg = crypto_alloc_shash("sha256", 0, 0);
+ if (IS_ERR(alg)) {
+ rc = PTR_ERR(alg);
+ goto out;
+ }
+
+ if (crypto_shash_digestsize(alg) != sizeof(fw_hdr->checksum)) {
+ rc = -EFAULT;
+ dev_err(&tp->intf->dev, "digestsize incorrect (%u)\n",
+ crypto_shash_digestsize(alg));
+ goto free_shash;
+ }
+
+ len = sizeof(*sdesc) + crypto_shash_descsize(alg);
+ sdesc = kmalloc(len, GFP_KERNEL);
+ if (!sdesc) {
+ rc = -ENOMEM;
+ goto free_shash;
+ }
+ sdesc->tfm = alg;
+
+ len = size - sizeof(fw_hdr->checksum);
+ rc = crypto_shash_digest(sdesc, fw_hdr->version, len, checksum);
+ kfree(sdesc);
+ if (rc)
+ goto free_shash;
+
+ if (memcmp(fw_hdr->checksum, checksum, sizeof(fw_hdr->checksum))) {
+ dev_err(&tp->intf->dev, "checksum fail\n");
+ rc = -EFAULT;
+ }
+
+free_shash:
+ crypto_free_shash(alg);
+out:
+ return rc;
+}
+
+static long rtl8152_check_firmware(struct r8152 *tp, struct rtl_fw *rtl_fw)
+{
+ const struct firmware *fw = rtl_fw->fw;
+ struct fw_header *fw_hdr = (struct fw_header *)fw->data;
+ unsigned long fw_flags = 0;
+ long ret = -EFAULT;
+ int i;
+
+ if (fw->size < sizeof(*fw_hdr)) {
+ dev_err(&tp->intf->dev, "file too small\n");
+ goto fail;
+ }
+
+ ret = rtl8152_fw_verify_checksum(tp, fw_hdr, fw->size);
+ if (ret)
+ goto fail;
+
+ ret = -EFAULT;
+
+ for (i = sizeof(*fw_hdr); i < fw->size;) {
+ struct fw_block *block = (struct fw_block *)&fw->data[i];
+ u32 type;
+
+ if ((i + sizeof(*block)) > fw->size)
+ goto fail;
+
+ type = __le32_to_cpu(block->type);
+ switch (type) {
+ case RTL_FW_END:
+ if (__le32_to_cpu(block->length) != sizeof(*block))
+ goto fail;
+ goto fw_end;
+ case RTL_FW_PLA:
+ if (test_bit(FW_FLAGS_PLA, &fw_flags)) {
+ dev_err(&tp->intf->dev,
+ "multiple PLA firmware encountered");
+ goto fail;
+ }
+
+ if (!rtl8152_is_fw_mac_ok(tp, (struct fw_mac *)block)) {
+ dev_err(&tp->intf->dev,
+ "check PLA firmware failed\n");
+ goto fail;
+ }
+ __set_bit(FW_FLAGS_PLA, &fw_flags);
+ break;
+ case RTL_FW_USB:
+ if (test_bit(FW_FLAGS_USB, &fw_flags)) {
+ dev_err(&tp->intf->dev,
+ "multiple USB firmware encountered");
+ goto fail;
+ }
+
+ if (!rtl8152_is_fw_mac_ok(tp, (struct fw_mac *)block)) {
+ dev_err(&tp->intf->dev,
+ "check USB firmware failed\n");
+ goto fail;
+ }
+ __set_bit(FW_FLAGS_USB, &fw_flags);
+ break;
+ case RTL_FW_PHY_START:
+ if (test_bit(FW_FLAGS_START, &fw_flags) ||
+ test_bit(FW_FLAGS_NC, &fw_flags) ||
+ test_bit(FW_FLAGS_NC1, &fw_flags) ||
+ test_bit(FW_FLAGS_NC2, &fw_flags) ||
+ test_bit(FW_FLAGS_UC2, &fw_flags) ||
+ test_bit(FW_FLAGS_UC, &fw_flags) ||
+ test_bit(FW_FLAGS_STOP, &fw_flags)) {
+ dev_err(&tp->intf->dev,
+ "check PHY_START fail\n");
+ goto fail;
+ }
+
+ if (__le32_to_cpu(block->length) != sizeof(struct fw_phy_patch_key)) {
+ dev_err(&tp->intf->dev,
+ "Invalid length for PHY_START\n");
+ goto fail;
+ }
+ __set_bit(FW_FLAGS_START, &fw_flags);
+ break;
+ case RTL_FW_PHY_STOP:
+ if (test_bit(FW_FLAGS_STOP, &fw_flags) ||
+ !test_bit(FW_FLAGS_START, &fw_flags)) {
+ dev_err(&tp->intf->dev,
+ "Check PHY_STOP fail\n");
+ goto fail;
+ }
+
+ if (__le32_to_cpu(block->length) != sizeof(*block)) {
+ dev_err(&tp->intf->dev,
+ "Invalid length for PHY_STOP\n");
+ goto fail;
+ }
+ __set_bit(FW_FLAGS_STOP, &fw_flags);
+ break;
+ case RTL_FW_PHY_NC:
+ if (!test_bit(FW_FLAGS_START, &fw_flags) ||
+ test_bit(FW_FLAGS_STOP, &fw_flags)) {
+ dev_err(&tp->intf->dev,
+ "check PHY_NC fail\n");
+ goto fail;
+ }
+
+ if (test_bit(FW_FLAGS_NC, &fw_flags)) {
+ dev_err(&tp->intf->dev,
+ "multiple PHY NC encountered\n");
+ goto fail;
+ }
+
+ if (!rtl8152_is_fw_phy_nc_ok(tp, (struct fw_phy_nc *)block)) {
+ dev_err(&tp->intf->dev,
+ "check PHY NC firmware failed\n");
+ goto fail;
+ }
+ __set_bit(FW_FLAGS_NC, &fw_flags);
+ break;
+ case RTL_FW_PHY_UNION_NC:
+ if (!test_bit(FW_FLAGS_START, &fw_flags) ||
+ test_bit(FW_FLAGS_NC1, &fw_flags) ||
+ test_bit(FW_FLAGS_NC2, &fw_flags) ||
+ test_bit(FW_FLAGS_UC2, &fw_flags) ||
+ test_bit(FW_FLAGS_UC, &fw_flags) ||
+ test_bit(FW_FLAGS_STOP, &fw_flags)) {
+ dev_err(&tp->intf->dev, "PHY_UNION_NC out of order\n");
+ goto fail;
+ }
+
+ if (test_bit(FW_FLAGS_NC, &fw_flags)) {
+ dev_err(&tp->intf->dev, "multiple PHY_UNION_NC encountered\n");
+ goto fail;
+ }
+
+ if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) {
+ dev_err(&tp->intf->dev, "check PHY_UNION_NC failed\n");
+ goto fail;
+ }
+ __set_bit(FW_FLAGS_NC, &fw_flags);
+ break;
+ case RTL_FW_PHY_UNION_NC1:
+ if (!test_bit(FW_FLAGS_START, &fw_flags) ||
+ test_bit(FW_FLAGS_NC2, &fw_flags) ||
+ test_bit(FW_FLAGS_UC2, &fw_flags) ||
+ test_bit(FW_FLAGS_UC, &fw_flags) ||
+ test_bit(FW_FLAGS_STOP, &fw_flags)) {
+ dev_err(&tp->intf->dev, "PHY_UNION_NC1 out of order\n");
+ goto fail;
+ }
+
+ if (test_bit(FW_FLAGS_NC1, &fw_flags)) {
+ dev_err(&tp->intf->dev, "multiple PHY NC1 encountered\n");
+ goto fail;
+ }
+
+ if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) {
+ dev_err(&tp->intf->dev, "check PHY_UNION_NC1 failed\n");
+ goto fail;
+ }
+ __set_bit(FW_FLAGS_NC1, &fw_flags);
+ break;
+ case RTL_FW_PHY_UNION_NC2:
+ if (!test_bit(FW_FLAGS_START, &fw_flags) ||
+ test_bit(FW_FLAGS_UC2, &fw_flags) ||
+ test_bit(FW_FLAGS_UC, &fw_flags) ||
+ test_bit(FW_FLAGS_STOP, &fw_flags)) {
+ dev_err(&tp->intf->dev, "PHY_UNION_NC2 out of order\n");
+ goto fail;
+ }
+
+ if (test_bit(FW_FLAGS_NC2, &fw_flags)) {
+ dev_err(&tp->intf->dev, "multiple PHY NC2 encountered\n");
+ goto fail;
+ }
+
+ if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) {
+ dev_err(&tp->intf->dev, "check PHY_UNION_NC2 failed\n");
+ goto fail;
+ }
+ __set_bit(FW_FLAGS_NC2, &fw_flags);
+ break;
+ case RTL_FW_PHY_UNION_UC2:
+ if (!test_bit(FW_FLAGS_START, &fw_flags) ||
+ test_bit(FW_FLAGS_UC, &fw_flags) ||
+ test_bit(FW_FLAGS_STOP, &fw_flags)) {
+ dev_err(&tp->intf->dev, "PHY_UNION_UC2 out of order\n");
+ goto fail;
+ }
+
+ if (test_bit(FW_FLAGS_UC2, &fw_flags)) {
+ dev_err(&tp->intf->dev, "multiple PHY UC2 encountered\n");
+ goto fail;
+ }
+
+ if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) {
+ dev_err(&tp->intf->dev, "check PHY_UNION_UC2 failed\n");
+ goto fail;
+ }
+ __set_bit(FW_FLAGS_UC2, &fw_flags);
+ break;
+ case RTL_FW_PHY_UNION_UC:
+ if (!test_bit(FW_FLAGS_START, &fw_flags) ||
+ test_bit(FW_FLAGS_STOP, &fw_flags)) {
+ dev_err(&tp->intf->dev, "PHY_UNION_UC out of order\n");
+ goto fail;
+ }
+
+ if (test_bit(FW_FLAGS_UC, &fw_flags)) {
+ dev_err(&tp->intf->dev, "multiple PHY UC encountered\n");
+ goto fail;
+ }
+
+ if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) {
+ dev_err(&tp->intf->dev, "check PHY_UNION_UC failed\n");
+ goto fail;
+ }
+ __set_bit(FW_FLAGS_UC, &fw_flags);
+ break;
+ case RTL_FW_PHY_UNION_MISC:
+ if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) {
+ dev_err(&tp->intf->dev, "check RTL_FW_PHY_UNION_MISC failed\n");
+ goto fail;
+ }
+ break;
+ case RTL_FW_PHY_FIXUP:
+ if (!rtl8152_is_fw_phy_fixup_ok(tp, (struct fw_phy_fixup *)block)) {
+ dev_err(&tp->intf->dev, "check PHY fixup failed\n");
+ goto fail;
+ }
+ break;
+ case RTL_FW_PHY_SPEED_UP:
+ if (test_bit(FW_FLAGS_SPEED_UP, &fw_flags)) {
+ dev_err(&tp->intf->dev, "multiple PHY firmware encountered");
+ goto fail;
+ }
+
+ if (!rtl8152_is_fw_phy_speed_up_ok(tp, (struct fw_phy_speed_up *)block)) {
+ dev_err(&tp->intf->dev, "check PHY speed up failed\n");
+ goto fail;
+ }
+ __set_bit(FW_FLAGS_SPEED_UP, &fw_flags);
+ break;
+ case RTL_FW_PHY_VER:
+ if (test_bit(FW_FLAGS_START, &fw_flags) ||
+ test_bit(FW_FLAGS_NC, &fw_flags) ||
+ test_bit(FW_FLAGS_NC1, &fw_flags) ||
+ test_bit(FW_FLAGS_NC2, &fw_flags) ||
+ test_bit(FW_FLAGS_UC2, &fw_flags) ||
+ test_bit(FW_FLAGS_UC, &fw_flags) ||
+ test_bit(FW_FLAGS_STOP, &fw_flags)) {
+ dev_err(&tp->intf->dev, "Invalid order to set PHY version\n");
+ goto fail;
+ }
+
+ if (test_bit(FW_FLAGS_VER, &fw_flags)) {
+ dev_err(&tp->intf->dev, "multiple PHY version encountered");
+ goto fail;
+ }
+
+ if (!rtl8152_is_fw_phy_ver_ok(tp, (struct fw_phy_ver *)block)) {
+ dev_err(&tp->intf->dev, "check PHY version failed\n");
+ goto fail;
+ }
+ __set_bit(FW_FLAGS_VER, &fw_flags);
+ break;
+ default:
+ dev_warn(&tp->intf->dev, "Unknown type %u is found\n",
+ type);
+ break;
+ }
+
+ /* next block */
+ i += ALIGN(__le32_to_cpu(block->length), 8);
+ }
+
+fw_end:
+ if (test_bit(FW_FLAGS_START, &fw_flags) && !test_bit(FW_FLAGS_STOP, &fw_flags)) {
+ dev_err(&tp->intf->dev, "without PHY_STOP\n");
+ goto fail;
+ }
+
+ return 0;
+fail:
+ return ret;
+}
+
+static void rtl_ram_code_speed_up(struct r8152 *tp, struct fw_phy_speed_up *phy, bool wait)
+{
+ u32 len;
+ u8 *data;
+
+ if (sram_read(tp, SRAM_GPHY_FW_VER) >= __le16_to_cpu(phy->version)) {
+ dev_dbg(&tp->intf->dev, "PHY firmware has been the newest\n");
+ return;
+ }
+
+ len = __le32_to_cpu(phy->blk_hdr.length);
+ len -= __le16_to_cpu(phy->fw_offset);
+ data = (u8 *)phy + __le16_to_cpu(phy->fw_offset);
+
+ if (rtl_phy_patch_request(tp, true, wait))
+ return;
+
+ while (len) {
+ u32 ocp_data, size;
+ int i;
+
+ if (len < 2048)
+ size = len;
+ else
+ size = 2048;
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_GPHY_CTRL);
+ ocp_data |= GPHY_PATCH_DONE | BACKUP_RESTRORE;
+ ocp_write_word(tp, MCU_TYPE_USB, USB_GPHY_CTRL, ocp_data);
+
+ generic_ocp_write(tp, __le16_to_cpu(phy->fw_reg), 0xff, size, data, MCU_TYPE_USB);
+
+ data += size;
+ len -= size;
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_POL_GPIO_CTRL);
+ ocp_data |= POL_GPHY_PATCH;
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_POL_GPIO_CTRL, ocp_data);
+
+ for (i = 0; i < 1000; i++) {
+ if (!(ocp_read_word(tp, MCU_TYPE_PLA, PLA_POL_GPIO_CTRL) & POL_GPHY_PATCH))
+ break;
+ }
+
+ if (i == 1000) {
+ dev_err(&tp->intf->dev, "ram code speedup mode timeout\n");
+ break;
+ }
+ }
+
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, tp->ocp_base);
+ rtl_phy_patch_request(tp, false, wait);
+
+ if (sram_read(tp, SRAM_GPHY_FW_VER) == __le16_to_cpu(phy->version))
+ dev_dbg(&tp->intf->dev, "successfully applied %s\n", phy->info);
+ else
+ dev_err(&tp->intf->dev, "ram code speedup mode fail\n");
+}
+
+static int rtl8152_fw_phy_ver(struct r8152 *tp, struct fw_phy_ver *phy_ver)
+{
+ u16 ver_addr, ver;
+
+ ver_addr = __le16_to_cpu(phy_ver->ver.addr);
+ ver = __le16_to_cpu(phy_ver->ver.data);
+
+ if (sram_read(tp, ver_addr) >= ver) {
+ dev_dbg(&tp->intf->dev, "PHY firmware has been the newest\n");
+ return 0;
+ }
+
+ sram_write(tp, ver_addr, ver);
+
+ dev_dbg(&tp->intf->dev, "PHY firmware version %x\n", ver);
+
+ return ver;
+}
+
+static void rtl8152_fw_phy_fixup(struct r8152 *tp, struct fw_phy_fixup *fix)
+{
+ u16 addr, data;
+
+ addr = __le16_to_cpu(fix->setting.addr);
+ data = ocp_reg_read(tp, addr);
+
+ switch (__le16_to_cpu(fix->bit_cmd)) {
+ case FW_FIXUP_AND:
+ data &= __le16_to_cpu(fix->setting.data);
+ break;
+ case FW_FIXUP_OR:
+ data |= __le16_to_cpu(fix->setting.data);
+ break;
+ case FW_FIXUP_NOT:
+ data &= ~__le16_to_cpu(fix->setting.data);
+ break;
+ case FW_FIXUP_XOR:
+ data ^= __le16_to_cpu(fix->setting.data);
+ break;
+ default:
+ return;
+ }
+
+ ocp_reg_write(tp, addr, data);
+
+ dev_dbg(&tp->intf->dev, "applied ocp %x %x\n", addr, data);
+}
+
+static void rtl8152_fw_phy_union_apply(struct r8152 *tp, struct fw_phy_union *phy)
+{
+ __le16 *data;
+ u32 length;
+ int i, num;
+
+ num = phy->pre_num;
+ for (i = 0; i < num; i++)
+ sram_write(tp, __le16_to_cpu(phy->pre_set[i].addr),
+ __le16_to_cpu(phy->pre_set[i].data));
+
+ length = __le32_to_cpu(phy->blk_hdr.length);
+ length -= __le16_to_cpu(phy->fw_offset);
+ num = length / 2;
+ data = (__le16 *)((u8 *)phy + __le16_to_cpu(phy->fw_offset));
+
+ ocp_reg_write(tp, OCP_SRAM_ADDR, __le16_to_cpu(phy->fw_reg));
+ for (i = 0; i < num; i++)
+ ocp_reg_write(tp, OCP_SRAM_DATA, __le16_to_cpu(data[i]));
+
+ num = phy->bp_num;
+ for (i = 0; i < num; i++)
+ sram_write(tp, __le16_to_cpu(phy->bp[i].addr), __le16_to_cpu(phy->bp[i].data));
+
+ if (phy->bp_num && phy->bp_en.addr)
+ sram_write(tp, __le16_to_cpu(phy->bp_en.addr), __le16_to_cpu(phy->bp_en.data));
+
+ dev_dbg(&tp->intf->dev, "successfully applied %s\n", phy->info);
+}
+
+static void rtl8152_fw_phy_nc_apply(struct r8152 *tp, struct fw_phy_nc *phy)
+{
+ u16 mode_reg, bp_index;
+ u32 length, i, num;
+ __le16 *data;
+
+ mode_reg = __le16_to_cpu(phy->mode_reg);
+ sram_write(tp, mode_reg, __le16_to_cpu(phy->mode_pre));
+ sram_write(tp, __le16_to_cpu(phy->ba_reg),
+ __le16_to_cpu(phy->ba_data));
+
+ length = __le32_to_cpu(phy->blk_hdr.length);
+ length -= __le16_to_cpu(phy->fw_offset);
+ num = length / 2;
+ data = (__le16 *)((u8 *)phy + __le16_to_cpu(phy->fw_offset));
+
+ ocp_reg_write(tp, OCP_SRAM_ADDR, __le16_to_cpu(phy->fw_reg));
+ for (i = 0; i < num; i++)
+ ocp_reg_write(tp, OCP_SRAM_DATA, __le16_to_cpu(data[i]));
+
+ sram_write(tp, __le16_to_cpu(phy->patch_en_addr),
+ __le16_to_cpu(phy->patch_en_value));
+
+ bp_index = __le16_to_cpu(phy->bp_start);
+ num = __le16_to_cpu(phy->bp_num);
+ for (i = 0; i < num; i++) {
+ sram_write(tp, bp_index, __le16_to_cpu(phy->bp[i]));
+ bp_index += 2;
+ }
+
+ sram_write(tp, mode_reg, __le16_to_cpu(phy->mode_post));
+
+ dev_dbg(&tp->intf->dev, "successfully applied %s\n", phy->info);
+}
+
+static void rtl8152_fw_mac_apply(struct r8152 *tp, struct fw_mac *mac)
+{
+ u16 bp_en_addr, bp_index, type, bp_num, fw_ver_reg;
+ u32 length;
+ u8 *data;
+ int i;
+
+ switch (__le32_to_cpu(mac->blk_hdr.type)) {
+ case RTL_FW_PLA:
+ type = MCU_TYPE_PLA;
+ break;
+ case RTL_FW_USB:
+ type = MCU_TYPE_USB;
+ break;
+ default:
+ return;
+ }
+
+ fw_ver_reg = __le16_to_cpu(mac->fw_ver_reg);
+ if (fw_ver_reg && ocp_read_byte(tp, MCU_TYPE_USB, fw_ver_reg) >= mac->fw_ver_data) {
+ dev_dbg(&tp->intf->dev, "%s firmware has been the newest\n", type ? "PLA" : "USB");
+ return;
+ }
+
+ rtl_clear_bp(tp, type);
+
+ /* Enable backup/restore of MACDBG. This is required after clearing PLA
+ * break points and before applying the PLA firmware.
+ */
+ if (tp->version == RTL_VER_04 && type == MCU_TYPE_PLA &&
+ !(ocp_read_word(tp, MCU_TYPE_PLA, PLA_MACDBG_POST) & DEBUG_OE)) {
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MACDBG_PRE, DEBUG_LTSSM);
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MACDBG_POST, DEBUG_LTSSM);
+ }
+
+ length = __le32_to_cpu(mac->blk_hdr.length);
+ length -= __le16_to_cpu(mac->fw_offset);
+
+ data = (u8 *)mac;
+ data += __le16_to_cpu(mac->fw_offset);
+
+ generic_ocp_write(tp, __le16_to_cpu(mac->fw_reg), 0xff, length, data,
+ type);
+
+ ocp_write_word(tp, type, __le16_to_cpu(mac->bp_ba_addr),
+ __le16_to_cpu(mac->bp_ba_value));
+
+ bp_index = __le16_to_cpu(mac->bp_start);
+ bp_num = __le16_to_cpu(mac->bp_num);
+ for (i = 0; i < bp_num; i++) {
+ ocp_write_word(tp, type, bp_index, __le16_to_cpu(mac->bp[i]));
+ bp_index += 2;
+ }
+
+ bp_en_addr = __le16_to_cpu(mac->bp_en_addr);
+ if (bp_en_addr)
+ ocp_write_word(tp, type, bp_en_addr,
+ __le16_to_cpu(mac->bp_en_value));
+
+ if (fw_ver_reg)
+ ocp_write_byte(tp, MCU_TYPE_USB, fw_ver_reg,
+ mac->fw_ver_data);
+
+ dev_dbg(&tp->intf->dev, "successfully applied %s\n", mac->info);
+}
+
+void rtl8152_apply_firmware(struct r8152 *tp, bool power_cut)
+{
+ struct rtl_fw *rtl_fw = &tp->rtl_fw;
+ const struct firmware *fw;
+ struct fw_header *fw_hdr;
+ struct fw_phy_patch_key *key;
+ u16 key_addr = 0;
+ int i, patch_phy = 1;
+
+ if (IS_ERR_OR_NULL(rtl_fw->fw))
+ return;
+
+ fw = rtl_fw->fw;
+ fw_hdr = (struct fw_header *)fw->data;
+
+ if (rtl_fw->pre_fw)
+ rtl_fw->pre_fw(tp);
+
+ for (i = offsetof(struct fw_header, blocks); i < fw->size;) {
+ struct fw_block *block = (struct fw_block *)&fw->data[i];
+
+ switch (__le32_to_cpu(block->type)) {
+ case RTL_FW_END:
+ goto post_fw;
+ case RTL_FW_PLA:
+ case RTL_FW_USB:
+ rtl8152_fw_mac_apply(tp, (struct fw_mac *)block);
+ break;
+ case RTL_FW_PHY_START:
+ if (!patch_phy)
+ break;
+ key = (struct fw_phy_patch_key *)block;
+ key_addr = __le16_to_cpu(key->key_reg);
+ rtl_pre_ram_code(tp, key_addr, __le16_to_cpu(key->key_data), !power_cut);
+ break;
+ case RTL_FW_PHY_STOP:
+ if (!patch_phy)
+ break;
+ WARN_ON(!key_addr);
+ rtl_post_ram_code(tp, key_addr, !power_cut);
+ break;
+ case RTL_FW_PHY_NC:
+ rtl8152_fw_phy_nc_apply(tp, (struct fw_phy_nc *)block);
+ break;
+ case RTL_FW_PHY_VER:
+ patch_phy = rtl8152_fw_phy_ver(tp, (struct fw_phy_ver *)block);
+ break;
+ case RTL_FW_PHY_UNION_NC:
+ case RTL_FW_PHY_UNION_NC1:
+ case RTL_FW_PHY_UNION_NC2:
+ case RTL_FW_PHY_UNION_UC2:
+ case RTL_FW_PHY_UNION_UC:
+ case RTL_FW_PHY_UNION_MISC:
+ if (patch_phy)
+ rtl8152_fw_phy_union_apply(tp, (struct fw_phy_union *)block);
+ break;
+ case RTL_FW_PHY_FIXUP:
+ if (patch_phy)
+ rtl8152_fw_phy_fixup(tp, (struct fw_phy_fixup *)block);
+ break;
+ case RTL_FW_PHY_SPEED_UP:
+ rtl_ram_code_speed_up(tp, (struct fw_phy_speed_up *)block, !power_cut);
+ break;
+ default:
+ break;
+ }
+
+ i += ALIGN(__le32_to_cpu(block->length), 8);
+ }
+
+post_fw:
+ if (rtl_fw->post_fw)
+ rtl_fw->post_fw(tp);
+
+ strscpy(rtl_fw->version, fw_hdr->version, RTL_VER_SIZE);
+ dev_info(&tp->intf->dev, "load %s successfully\n", rtl_fw->version);
+}
+
+void rtl8152_release_firmware(struct r8152 *tp)
+{
+ struct rtl_fw *rtl_fw = &tp->rtl_fw;
+
+ if (!IS_ERR_OR_NULL(rtl_fw->fw)) {
+ release_firmware(rtl_fw->fw);
+ rtl_fw->fw = NULL;
+ }
+}
+
+int rtl8152_request_firmware(struct r8152 *tp)
+{
+ struct rtl_fw *rtl_fw = &tp->rtl_fw;
+ long rc;
+
+ if (rtl_fw->fw || !rtl_fw->fw_name) {
+ dev_info(&tp->intf->dev, "skip request firmware\n");
+ rc = 0;
+ goto result;
+ }
+
+ rc = request_firmware(&rtl_fw->fw, rtl_fw->fw_name, &tp->intf->dev);
+ if (rc < 0)
+ goto result;
+
+ rc = rtl8152_check_firmware(tp, rtl_fw);
+ if (rc < 0)
+ release_firmware(rtl_fw->fw);
+
+result:
+ if (rc) {
+ rtl_fw->fw = ERR_PTR(rc);
+
+ dev_warn(&tp->intf->dev,
+ "unable to load firmware patch %s (%ld)\n",
+ rtl_fw->fw_name, rc);
+ }
+
+ return rc;
+}
+
+static int r8153_pre_firmware_1(struct r8152 *tp)
+{
+ int i;
+
+ /* Wait till the WTD timer is ready. It would take at most 104 ms. */
+ for (i = 0; i < 104; i++) {
+ u32 ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_WDT1_CTRL);
+
+ if (!(ocp_data & WTD1_EN))
+ break;
+ usleep_range(1000, 2000);
+ }
+
+ return 0;
+}
+
+static int r8153_post_firmware_1(struct r8152 *tp)
+{
+ /* reset UPHY timer to 36 ms */
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_UPHY_TIMER, 36000 / 16);
+
+ return 0;
+}
+
+static int r8153_pre_firmware_2(struct r8152 *tp)
+{
+ u32 ocp_data;
+
+ r8153_pre_firmware_1(tp);
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN0);
+ ocp_data &= ~FW_FIX_SUSPEND;
+ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN0, ocp_data);
+
+ return 0;
+}
+
+#define BP4_SUPER_ONLY 0x1578 /* RTL_VER_04 only */
+
+static int r8153_post_firmware_2(struct r8152 *tp)
+{
+ u32 ocp_data;
+
+ /* set USB_BP_4 to support USB_SPEED_SUPER only */
+ if (ocp_read_byte(tp, MCU_TYPE_USB, USB_CSTMR) & FORCE_SUPER)
+ ocp_write_word(tp, MCU_TYPE_USB, USB_BP_4, BP4_SUPER_ONLY);
+
+ r8153_post_firmware_1(tp);
+
+ /* enable U3P3 check, set the counter to 4 */
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, U3P3_CHECK_EN | 4);
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN0);
+ ocp_data |= FW_FIX_SUSPEND;
+ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN0, ocp_data);
+
+ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_USB2PHY);
+ ocp_data |= USB2PHY_L1 | USB2PHY_SUSPEND;
+ ocp_write_byte(tp, MCU_TYPE_USB, USB_USB2PHY, ocp_data);
+
+ return 0;
+}
+
+static int r8153_post_firmware_3(struct r8152 *tp)
+{
+ u32 ocp_data;
+
+ /* enable bp0 if support USB_SPEED_SUPER only */
+ if (ocp_read_byte(tp, MCU_TYPE_USB, USB_CSTMR) & FORCE_SUPER) {
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_BP_EN);
+ ocp_data |= BIT(0);
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_BP_EN, ocp_data);
+ }
+
+ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_USB2PHY);
+ ocp_data |= USB2PHY_L1 | USB2PHY_SUSPEND;
+ ocp_write_byte(tp, MCU_TYPE_USB, USB_USB2PHY, ocp_data);
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1);
+ ocp_data |= FW_IP_RESET_EN;
+ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1, ocp_data);
+
+ return 0;
+}
+
+static int r8153b_pre_firmware_1(struct r8152 *tp)
+{
+ /* enable fc timer and set timer to 1 second. */
+ ocp_write_word(tp, MCU_TYPE_USB, USB_FC_TIMER,
+ CTRL_TIMER_EN | (1000 / 8));
+
+ return 0;
+}
+
+static int r8153b_post_firmware_1(struct r8152 *tp)
+{
+ u32 ocp_data;
+
+ /* enable bp0 for RTL8153-BND */
+ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_1);
+ if (ocp_data & BND_MASK) {
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_BP_EN);
+ ocp_data |= BIT(0);
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_BP_EN, ocp_data);
+ }
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_CTRL);
+ ocp_data |= FLOW_CTRL_PATCH_OPT;
+ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_CTRL, ocp_data);
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK);
+ ocp_data |= FC_PATCH_TASK;
+ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1);
+ ocp_data |= FW_IP_RESET_EN;
+ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1, ocp_data);
+
+ return 0;
+}
+
+static int r8153c_post_firmware_1(struct r8152 *tp)
+{
+ u32 ocp_data;
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_CTRL);
+ ocp_data |= FLOW_CTRL_PATCH_2;
+ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_CTRL, ocp_data);
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK);
+ ocp_data |= FC_PATCH_TASK;
+ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
+
+ return 0;
+}
+
+static int r8156a_post_firmware_1(struct r8152 *tp)
+{
+ u32 ocp_data;
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1);
+ ocp_data |= FW_IP_RESET_EN;
+ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1, ocp_data);
+
+ /* Modify U3PHY parameter for compatibility issue */
+ ocp_write_dword(tp, MCU_TYPE_USB, USB_UPHY3_MDCMDIO, 0x4026840e);
+ ocp_write_dword(tp, MCU_TYPE_USB, USB_UPHY3_MDCMDIO, 0x4001acc9);
+
+ return 0;
+}
+
+int rtl_fw_init(struct r8152 *tp)
+{
+ struct rtl_fw *rtl_fw = &tp->rtl_fw;
+
+ switch (tp->version) {
+ case RTL_VER_04:
+ rtl_fw->fw_name = FIRMWARE_8153A_2;
+ rtl_fw->pre_fw = r8153_pre_firmware_1;
+ rtl_fw->post_fw = r8153_post_firmware_1;
+ break;
+ case RTL_VER_05:
+ rtl_fw->fw_name = FIRMWARE_8153A_3;
+ rtl_fw->pre_fw = r8153_pre_firmware_2;
+ rtl_fw->post_fw = r8153_post_firmware_2;
+ break;
+ case RTL_VER_06:
+ rtl_fw->fw_name = FIRMWARE_8153A_4;
+ rtl_fw->post_fw = r8153_post_firmware_3;
+ break;
+ case RTL_VER_09:
+ rtl_fw->fw_name = FIRMWARE_8153B_2;
+ rtl_fw->pre_fw = r8153b_pre_firmware_1;
+ rtl_fw->post_fw = r8153b_post_firmware_1;
+ break;
+ case RTL_VER_11:
+ rtl_fw->fw_name = FIRMWARE_8156A_2;
+ rtl_fw->post_fw = r8156a_post_firmware_1;
+ break;
+ case RTL_VER_13:
+ case RTL_VER_15:
+ rtl_fw->fw_name = FIRMWARE_8156B_2;
+ break;
+ case RTL_VER_14:
+ rtl_fw->fw_name = FIRMWARE_8153C_1;
+ rtl_fw->pre_fw = r8153b_pre_firmware_1;
+ rtl_fw->post_fw = r8153c_post_firmware_1;
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
diff --git a/drivers/net/usb/realtek/r8152.c b/drivers/net/usb/realtek/r8152_main.c
similarity index 75%
rename from drivers/net/usb/realtek/r8152.c
rename to drivers/net/usb/realtek/r8152_main.c
index 1692d3b1b6e1..4ee4be237b4c 100644
--- a/drivers/net/usb/realtek/r8152.c
+++ b/drivers/net/usb/realtek/r8152_main.c
@@ -24,12 +24,11 @@
#include <linux/suspend.h>
#include <linux/atomic.h>
#include <linux/acpi.h>
-#include <linux/firmware.h>
-#include <crypto/hash.h>
#include <linux/usb/r8152.h>
+#include "r8152_basic.h"
/* Information for net-next */
-#define NETNEXT_VERSION "12"
+#define NETNEXT_VERSION "13"
/* Information for net */
#define NET_VERSION "11"
@@ -41,687 +40,6 @@
#define R8152_PHY_ID 32
-#define PLA_IDR 0xc000
-#define PLA_RCR 0xc010
-#define PLA_RCR1 0xc012
-#define PLA_RMS 0xc016
-#define PLA_RXFIFO_CTRL0 0xc0a0
-#define PLA_RXFIFO_FULL 0xc0a2
-#define PLA_RXFIFO_CTRL1 0xc0a4
-#define PLA_RX_FIFO_FULL 0xc0a6
-#define PLA_RXFIFO_CTRL2 0xc0a8
-#define PLA_RX_FIFO_EMPTY 0xc0aa
-#define PLA_DMY_REG0 0xc0b0
-#define PLA_FMC 0xc0b4
-#define PLA_CFG_WOL 0xc0b6
-#define PLA_TEREDO_CFG 0xc0bc
-#define PLA_TEREDO_WAKE_BASE 0xc0c4
-#define PLA_MAR 0xcd00
-#define PLA_BACKUP 0xd000
-#define PLA_BDC_CR 0xd1a0
-#define PLA_TEREDO_TIMER 0xd2cc
-#define PLA_REALWOW_TIMER 0xd2e8
-#define PLA_UPHY_TIMER 0xd388
-#define PLA_SUSPEND_FLAG 0xd38a
-#define PLA_INDICATE_FALG 0xd38c
-#define PLA_MACDBG_PRE 0xd38c /* RTL_VER_04 only */
-#define PLA_MACDBG_POST 0xd38e /* RTL_VER_04 only */
-#define PLA_EXTRA_STATUS 0xd398
-#define PLA_GPHY_CTRL 0xd3ae
-#define PLA_POL_GPIO_CTRL 0xdc6a
-#define PLA_EFUSE_DATA 0xdd00
-#define PLA_EFUSE_CMD 0xdd02
-#define PLA_LEDSEL 0xdd90
-#define PLA_LED_FEATURE 0xdd92
-#define PLA_PHYAR 0xde00
-#define PLA_BOOT_CTRL 0xe004
-#define PLA_LWAKE_CTRL_REG 0xe007
-#define PLA_GPHY_INTR_IMR 0xe022
-#define PLA_EEE_CR 0xe040
-#define PLA_EEE_TXTWSYS 0xe04c
-#define PLA_EEE_TXTWSYS_2P5G 0xe058
-#define PLA_EEEP_CR 0xe080
-#define PLA_MAC_PWR_CTRL 0xe0c0
-#define PLA_MAC_PWR_CTRL2 0xe0ca
-#define PLA_MAC_PWR_CTRL3 0xe0cc
-#define PLA_MAC_PWR_CTRL4 0xe0ce
-#define PLA_WDT6_CTRL 0xe428
-#define PLA_TCR0 0xe610
-#define PLA_TCR1 0xe612
-#define PLA_MTPS 0xe615
-#define PLA_TXFIFO_CTRL 0xe618
-#define PLA_TXFIFO_FULL 0xe61a
-#define PLA_RSTTALLY 0xe800
-#define PLA_CR 0xe813
-#define PLA_CRWECR 0xe81c
-#define PLA_CONFIG12 0xe81e /* CONFIG1, CONFIG2 */
-#define PLA_CONFIG34 0xe820 /* CONFIG3, CONFIG4 */
-#define PLA_CONFIG5 0xe822
-#define PLA_PHY_PWR 0xe84c
-#define PLA_OOB_CTRL 0xe84f
-#define PLA_CPCR 0xe854
-#define PLA_MISC_0 0xe858
-#define PLA_MISC_1 0xe85a
-#define PLA_OCP_GPHY_BASE 0xe86c
-#define PLA_TALLYCNT 0xe890
-#define PLA_SFF_STS_7 0xe8de
-#define PLA_PHYSTATUS 0xe908
-#define PLA_CONFIG6 0xe90a /* CONFIG6 */
-#define PLA_USB_CFG 0xe952
-#define PLA_BP_BA 0xfc26
-#define PLA_BP_0 0xfc28
-#define PLA_BP_1 0xfc2a
-#define PLA_BP_2 0xfc2c
-#define PLA_BP_3 0xfc2e
-#define PLA_BP_4 0xfc30
-#define PLA_BP_5 0xfc32
-#define PLA_BP_6 0xfc34
-#define PLA_BP_7 0xfc36
-#define PLA_BP_EN 0xfc38
-
-#define USB_USB2PHY 0xb41e
-#define USB_SSPHYLINK1 0xb426
-#define USB_SSPHYLINK2 0xb428
-#define USB_L1_CTRL 0xb45e
-#define USB_U2P3_CTRL 0xb460
-#define USB_CSR_DUMMY1 0xb464
-#define USB_CSR_DUMMY2 0xb466
-#define USB_DEV_STAT 0xb808
-#define USB_CONNECT_TIMER 0xcbf8
-#define USB_MSC_TIMER 0xcbfc
-#define USB_BURST_SIZE 0xcfc0
-#define USB_FW_FIX_EN0 0xcfca
-#define USB_FW_FIX_EN1 0xcfcc
-#define USB_LPM_CONFIG 0xcfd8
-#define USB_ECM_OPTION 0xcfee
-#define USB_CSTMR 0xcfef /* RTL8153A */
-#define USB_MISC_2 0xcfff
-#define USB_ECM_OP 0xd26b
-#define USB_GPHY_CTRL 0xd284
-#define USB_SPEED_OPTION 0xd32a
-#define USB_FW_CTRL 0xd334 /* RTL8153B */
-#define USB_FC_TIMER 0xd340
-#define USB_USB_CTRL 0xd406
-#define USB_PHY_CTRL 0xd408
-#define USB_TX_AGG 0xd40a
-#define USB_RX_BUF_TH 0xd40c
-#define USB_USB_TIMER 0xd428
-#define USB_RX_EARLY_TIMEOUT 0xd42c
-#define USB_RX_EARLY_SIZE 0xd42e
-#define USB_PM_CTRL_STATUS 0xd432 /* RTL8153A */
-#define USB_RX_EXTRA_AGGR_TMR 0xd432 /* RTL8153B */
-#define USB_TX_DMA 0xd434
-#define USB_UPT_RXDMA_OWN 0xd437
-#define USB_UPHY3_MDCMDIO 0xd480
-#define USB_TOLERANCE 0xd490
-#define USB_LPM_CTRL 0xd41a
-#define USB_BMU_RESET 0xd4b0
-#define USB_BMU_CONFIG 0xd4b4
-#define USB_U1U2_TIMER 0xd4da
-#define USB_FW_TASK 0xd4e8 /* RTL8153B */
-#define USB_RX_AGGR_NUM 0xd4ee
-#define USB_UPS_CTRL 0xd800
-#define USB_POWER_CUT 0xd80a
-#define USB_MISC_0 0xd81a
-#define USB_MISC_1 0xd81f
-#define USB_AFE_CTRL2 0xd824
-#define USB_UPHY_XTAL 0xd826
-#define USB_UPS_CFG 0xd842
-#define USB_UPS_FLAGS 0xd848
-#define USB_WDT1_CTRL 0xe404
-#define USB_WDT11_CTRL 0xe43c
-#define USB_BP_BA PLA_BP_BA
-#define USB_BP_0 PLA_BP_0
-#define USB_BP_1 PLA_BP_1
-#define USB_BP_2 PLA_BP_2
-#define USB_BP_3 PLA_BP_3
-#define USB_BP_4 PLA_BP_4
-#define USB_BP_5 PLA_BP_5
-#define USB_BP_6 PLA_BP_6
-#define USB_BP_7 PLA_BP_7
-#define USB_BP_EN PLA_BP_EN /* RTL8153A */
-#define USB_BP_8 0xfc38 /* RTL8153B */
-#define USB_BP_9 0xfc3a
-#define USB_BP_10 0xfc3c
-#define USB_BP_11 0xfc3e
-#define USB_BP_12 0xfc40
-#define USB_BP_13 0xfc42
-#define USB_BP_14 0xfc44
-#define USB_BP_15 0xfc46
-#define USB_BP2_EN 0xfc48
-
-/* OCP Registers */
-#define OCP_ALDPS_CONFIG 0x2010
-#define OCP_EEE_CONFIG1 0x2080
-#define OCP_EEE_CONFIG2 0x2092
-#define OCP_EEE_CONFIG3 0x2094
-#define OCP_BASE_MII 0xa400
-#define OCP_EEE_AR 0xa41a
-#define OCP_EEE_DATA 0xa41c
-#define OCP_PHY_STATUS 0xa420
-#define OCP_NCTL_CFG 0xa42c
-#define OCP_POWER_CFG 0xa430
-#define OCP_EEE_CFG 0xa432
-#define OCP_SRAM_ADDR 0xa436
-#define OCP_SRAM_DATA 0xa438
-#define OCP_DOWN_SPEED 0xa442
-#define OCP_EEE_ABLE 0xa5c4
-#define OCP_EEE_ADV 0xa5d0
-#define OCP_EEE_LPABLE 0xa5d2
-#define OCP_10GBT_CTRL 0xa5d4
-#define OCP_10GBT_STAT 0xa5d6
-#define OCP_EEE_ADV2 0xa6d4
-#define OCP_PHY_STATE 0xa708 /* nway state for 8153 */
-#define OCP_PHY_PATCH_STAT 0xb800
-#define OCP_PHY_PATCH_CMD 0xb820
-#define OCP_PHY_LOCK 0xb82e
-#define OCP_ADC_IOFFSET 0xbcfc
-#define OCP_ADC_CFG 0xbc06
-#define OCP_SYSCLK_CFG 0xc416
-
-/* SRAM Register */
-#define SRAM_GREEN_CFG 0x8011
-#define SRAM_LPF_CFG 0x8012
-#define SRAM_GPHY_FW_VER 0x801e
-#define SRAM_10M_AMP1 0x8080
-#define SRAM_10M_AMP2 0x8082
-#define SRAM_IMPEDANCE 0x8084
-#define SRAM_PHY_LOCK 0xb82e
-
-/* PLA_RCR */
-#define RCR_AAP 0x00000001
-#define RCR_APM 0x00000002
-#define RCR_AM 0x00000004
-#define RCR_AB 0x00000008
-#define RCR_ACPT_ALL (RCR_AAP | RCR_APM | RCR_AM | RCR_AB)
-#define SLOT_EN BIT(11)
-
-/* PLA_RCR1 */
-#define OUTER_VLAN BIT(7)
-#define INNER_VLAN BIT(6)
-
-/* PLA_RXFIFO_CTRL0 */
-#define RXFIFO_THR1_NORMAL 0x00080002
-#define RXFIFO_THR1_OOB 0x01800003
-
-/* PLA_RXFIFO_FULL */
-#define RXFIFO_FULL_MASK 0xfff
-
-/* PLA_RXFIFO_CTRL1 */
-#define RXFIFO_THR2_FULL 0x00000060
-#define RXFIFO_THR2_HIGH 0x00000038
-#define RXFIFO_THR2_OOB 0x0000004a
-#define RXFIFO_THR2_NORMAL 0x00a0
-
-/* PLA_RXFIFO_CTRL2 */
-#define RXFIFO_THR3_FULL 0x00000078
-#define RXFIFO_THR3_HIGH 0x00000048
-#define RXFIFO_THR3_OOB 0x0000005a
-#define RXFIFO_THR3_NORMAL 0x0110
-
-/* PLA_TXFIFO_CTRL */
-#define TXFIFO_THR_NORMAL 0x00400008
-#define TXFIFO_THR_NORMAL2 0x01000008
-
-/* PLA_DMY_REG0 */
-#define ECM_ALDPS 0x0002
-
-/* PLA_FMC */
-#define FMC_FCR_MCU_EN 0x0001
-
-/* PLA_EEEP_CR */
-#define EEEP_CR_EEEP_TX 0x0002
-
-/* PLA_WDT6_CTRL */
-#define WDT6_SET_MODE 0x0010
-
-/* PLA_TCR0 */
-#define TCR0_TX_EMPTY 0x0800
-#define TCR0_AUTO_FIFO 0x0080
-
-/* PLA_TCR1 */
-#define VERSION_MASK 0x7cf0
-#define IFG_MASK (BIT(3) | BIT(9) | BIT(8))
-#define IFG_144NS BIT(9)
-#define IFG_96NS (BIT(9) | BIT(8))
-
-/* PLA_MTPS */
-#define MTPS_JUMBO (12 * 1024 / 64)
-#define MTPS_DEFAULT (6 * 1024 / 64)
-
-/* PLA_RSTTALLY */
-#define TALLY_RESET 0x0001
-
-/* PLA_CR */
-#define CR_RST 0x10
-#define CR_RE 0x08
-#define CR_TE 0x04
-
-/* PLA_CRWECR */
-#define CRWECR_NORAML 0x00
-#define CRWECR_CONFIG 0xc0
-
-/* PLA_OOB_CTRL */
-#define NOW_IS_OOB 0x80
-#define TXFIFO_EMPTY 0x20
-#define RXFIFO_EMPTY 0x10
-#define LINK_LIST_READY 0x02
-#define DIS_MCU_CLROOB 0x01
-#define FIFO_EMPTY (TXFIFO_EMPTY | RXFIFO_EMPTY)
-
-/* PLA_MISC_1 */
-#define RXDY_GATED_EN 0x0008
-
-/* PLA_SFF_STS_7 */
-#define RE_INIT_LL 0x8000
-#define MCU_BORW_EN 0x4000
-
-/* PLA_CPCR */
-#define FLOW_CTRL_EN BIT(0)
-#define CPCR_RX_VLAN 0x0040
-
-/* PLA_CFG_WOL */
-#define MAGIC_EN 0x0001
-
-/* PLA_TEREDO_CFG */
-#define TEREDO_SEL 0x8000
-#define TEREDO_WAKE_MASK 0x7f00
-#define TEREDO_RS_EVENT_MASK 0x00fe
-#define OOB_TEREDO_EN 0x0001
-
-/* PLA_BDC_CR */
-#define ALDPS_PROXY_MODE 0x0001
-
-/* PLA_EFUSE_CMD */
-#define EFUSE_READ_CMD BIT(15)
-#define EFUSE_DATA_BIT16 BIT(7)
-
-/* PLA_CONFIG34 */
-#define LINK_ON_WAKE_EN 0x0010
-#define LINK_OFF_WAKE_EN 0x0008
-
-/* PLA_CONFIG6 */
-#define LANWAKE_CLR_EN BIT(0)
-
-/* PLA_USB_CFG */
-#define EN_XG_LIP BIT(1)
-#define EN_G_LIP BIT(2)
-
-/* PLA_CONFIG5 */
-#define BWF_EN 0x0040
-#define MWF_EN 0x0020
-#define UWF_EN 0x0010
-#define LAN_WAKE_EN 0x0002
-
-/* PLA_LED_FEATURE */
-#define LED_MODE_MASK 0x0700
-
-/* PLA_PHY_PWR */
-#define TX_10M_IDLE_EN 0x0080
-#define PFM_PWM_SWITCH 0x0040
-#define TEST_IO_OFF BIT(4)
-
-/* PLA_MAC_PWR_CTRL */
-#define D3_CLK_GATED_EN 0x00004000
-#define MCU_CLK_RATIO 0x07010f07
-#define MCU_CLK_RATIO_MASK 0x0f0f0f0f
-#define ALDPS_SPDWN_RATIO 0x0f87
-
-/* PLA_MAC_PWR_CTRL2 */
-#define EEE_SPDWN_RATIO 0x8007
-#define MAC_CLK_SPDWN_EN BIT(15)
-#define EEE_SPDWN_RATIO_MASK 0xff
-
-/* PLA_MAC_PWR_CTRL3 */
-#define PLA_MCU_SPDWN_EN BIT(14)
-#define PKT_AVAIL_SPDWN_EN 0x0100
-#define SUSPEND_SPDWN_EN 0x0004
-#define U1U2_SPDWN_EN 0x0002
-#define L1_SPDWN_EN 0x0001
-
-/* PLA_MAC_PWR_CTRL4 */
-#define PWRSAVE_SPDWN_EN 0x1000
-#define RXDV_SPDWN_EN 0x0800
-#define TX10MIDLE_EN 0x0100
-#define IDLE_SPDWN_EN BIT(6)
-#define TP100_SPDWN_EN 0x0020
-#define TP500_SPDWN_EN 0x0010
-#define TP1000_SPDWN_EN 0x0008
-#define EEE_SPDWN_EN 0x0001
-
-/* PLA_GPHY_INTR_IMR */
-#define GPHY_STS_MSK 0x0001
-#define SPEED_DOWN_MSK 0x0002
-#define SPDWN_RXDV_MSK 0x0004
-#define SPDWN_LINKCHG_MSK 0x0008
-
-/* PLA_PHYAR */
-#define PHYAR_FLAG 0x80000000
-
-/* PLA_EEE_CR */
-#define EEE_RX_EN 0x0001
-#define EEE_TX_EN 0x0002
-
-/* PLA_BOOT_CTRL */
-#define AUTOLOAD_DONE 0x0002
-
-/* PLA_LWAKE_CTRL_REG */
-#define LANWAKE_PIN BIT(7)
-
-/* PLA_SUSPEND_FLAG */
-#define LINK_CHG_EVENT BIT(0)
-
-/* PLA_INDICATE_FALG */
-#define UPCOMING_RUNTIME_D3 BIT(0)
-
-/* PLA_MACDBG_PRE and PLA_MACDBG_POST */
-#define DEBUG_OE BIT(0)
-#define DEBUG_LTSSM 0x0082
-
-/* PLA_EXTRA_STATUS */
-#define CUR_LINK_OK BIT(15)
-#define U3P3_CHECK_EN BIT(7) /* RTL_VER_05 only */
-#define LINK_CHANGE_FLAG BIT(8)
-#define POLL_LINK_CHG BIT(0)
-
-/* PLA_GPHY_CTRL */
-#define GPHY_FLASH BIT(1)
-
-/* PLA_POL_GPIO_CTRL */
-#define DACK_DET_EN BIT(15)
-#define POL_GPHY_PATCH BIT(4)
-
-/* USB_USB2PHY */
-#define USB2PHY_SUSPEND 0x0001
-#define USB2PHY_L1 0x0002
-
-/* USB_SSPHYLINK1 */
-#define DELAY_PHY_PWR_CHG BIT(1)
-
-/* USB_SSPHYLINK2 */
-#define pwd_dn_scale_mask 0x3ffe
-#define pwd_dn_scale(x) ((x) << 1)
-
-/* USB_CSR_DUMMY1 */
-#define DYNAMIC_BURST 0x0001
-
-/* USB_CSR_DUMMY2 */
-#define EP4_FULL_FC 0x0001
-
-/* USB_DEV_STAT */
-#define STAT_SPEED_MASK 0x0006
-#define STAT_SPEED_HIGH 0x0000
-#define STAT_SPEED_FULL 0x0002
-
-/* USB_FW_FIX_EN0 */
-#define FW_FIX_SUSPEND BIT(14)
-
-/* USB_FW_FIX_EN1 */
-#define FW_IP_RESET_EN BIT(9)
-
-/* USB_LPM_CONFIG */
-#define LPM_U1U2_EN BIT(0)
-
-/* USB_TX_AGG */
-#define TX_AGG_MAX_THRESHOLD 0x03
-
-/* USB_RX_BUF_TH */
-#define RX_THR_SUPPER 0x0c350180
-#define RX_THR_HIGH 0x7a120180
-#define RX_THR_SLOW 0xffff0180
-#define RX_THR_B 0x00010001
-
-/* USB_TX_DMA */
-#define TEST_MODE_DISABLE 0x00000001
-#define TX_SIZE_ADJUST1 0x00000100
-
-/* USB_BMU_RESET */
-#define BMU_RESET_EP_IN 0x01
-#define BMU_RESET_EP_OUT 0x02
-
-/* USB_BMU_CONFIG */
-#define ACT_ODMA BIT(1)
-
-/* USB_UPT_RXDMA_OWN */
-#define OWN_UPDATE BIT(0)
-#define OWN_CLEAR BIT(1)
-
-/* USB_FW_TASK */
-#define FC_PATCH_TASK BIT(1)
-
-/* USB_RX_AGGR_NUM */
-#define RX_AGGR_NUM_MASK 0x1ff
-
-/* USB_UPS_CTRL */
-#define POWER_CUT 0x0100
-
-/* USB_PM_CTRL_STATUS */
-#define RESUME_INDICATE 0x0001
-
-/* USB_ECM_OPTION */
-#define BYPASS_MAC_RESET BIT(5)
-
-/* USB_CSTMR */
-#define FORCE_SUPER BIT(0)
-
-/* USB_MISC_2 */
-#define UPS_FORCE_PWR_DOWN BIT(0)
-
-/* USB_ECM_OP */
-#define EN_ALL_SPEED BIT(0)
-
-/* USB_GPHY_CTRL */
-#define GPHY_PATCH_DONE BIT(2)
-#define BYPASS_FLASH BIT(5)
-#define BACKUP_RESTRORE BIT(6)
-
-/* USB_SPEED_OPTION */
-#define RG_PWRDN_EN BIT(8)
-#define ALL_SPEED_OFF BIT(9)
-
-/* USB_FW_CTRL */
-#define FLOW_CTRL_PATCH_OPT BIT(1)
-#define AUTO_SPEEDUP BIT(3)
-#define FLOW_CTRL_PATCH_2 BIT(8)
-
-/* USB_FC_TIMER */
-#define CTRL_TIMER_EN BIT(15)
-
-/* USB_USB_CTRL */
-#define CDC_ECM_EN BIT(3)
-#define RX_AGG_DISABLE 0x0010
-#define RX_ZERO_EN 0x0080
-
-/* USB_U2P3_CTRL */
-#define U2P3_ENABLE 0x0001
-#define RX_DETECT8 BIT(3)
-
-/* USB_POWER_CUT */
-#define PWR_EN 0x0001
-#define PHASE2_EN 0x0008
-#define UPS_EN BIT(4)
-#define USP_PREWAKE BIT(5)
-
-/* USB_MISC_0 */
-#define PCUT_STATUS 0x0001
-
-/* USB_RX_EARLY_TIMEOUT */
-#define COALESCE_SUPER 85000U
-#define COALESCE_HIGH 250000U
-#define COALESCE_SLOW 524280U
-
-/* USB_WDT1_CTRL */
-#define WTD1_EN BIT(0)
-
-/* USB_WDT11_CTRL */
-#define TIMER11_EN 0x0001
-
-/* USB_LPM_CTRL */
-/* bit 4 ~ 5: fifo empty boundary */
-#define FIFO_EMPTY_1FB 0x30 /* 0x1fb * 64 = 32448 bytes */
-/* bit 2 ~ 3: LMP timer */
-#define LPM_TIMER_MASK 0x0c
-#define LPM_TIMER_500MS 0x04 /* 500 ms */
-#define LPM_TIMER_500US 0x0c /* 500 us */
-#define ROK_EXIT_LPM 0x02
-
-/* USB_AFE_CTRL2 */
-#define SEN_VAL_MASK 0xf800
-#define SEN_VAL_NORMAL 0xa000
-#define SEL_RXIDLE 0x0100
-
-/* USB_UPHY_XTAL */
-#define OOBS_POLLING BIT(8)
-
-/* USB_UPS_CFG */
-#define SAW_CNT_1MS_MASK 0x0fff
-#define MID_REVERSE BIT(5) /* RTL8156A */
-
-/* USB_UPS_FLAGS */
-#define UPS_FLAGS_R_TUNE BIT(0)
-#define UPS_FLAGS_EN_10M_CKDIV BIT(1)
-#define UPS_FLAGS_250M_CKDIV BIT(2)
-#define UPS_FLAGS_EN_ALDPS BIT(3)
-#define UPS_FLAGS_CTAP_SHORT_DIS BIT(4)
-#define UPS_FLAGS_SPEED_MASK (0xf << 16)
-#define ups_flags_speed(x) ((x) << 16)
-#define UPS_FLAGS_EN_EEE BIT(20)
-#define UPS_FLAGS_EN_500M_EEE BIT(21)
-#define UPS_FLAGS_EN_EEE_CKDIV BIT(22)
-#define UPS_FLAGS_EEE_PLLOFF_100 BIT(23)
-#define UPS_FLAGS_EEE_PLLOFF_GIGA BIT(24)
-#define UPS_FLAGS_EEE_CMOD_LV_EN BIT(25)
-#define UPS_FLAGS_EN_GREEN BIT(26)
-#define UPS_FLAGS_EN_FLOW_CTR BIT(27)
-
-enum spd_duplex {
- NWAY_10M_HALF,
- NWAY_10M_FULL,
- NWAY_100M_HALF,
- NWAY_100M_FULL,
- NWAY_1000M_FULL,
- FORCE_10M_HALF,
- FORCE_10M_FULL,
- FORCE_100M_HALF,
- FORCE_100M_FULL,
- FORCE_1000M_FULL,
- NWAY_2500M_FULL,
-};
-
-/* OCP_ALDPS_CONFIG */
-#define ENPWRSAVE 0x8000
-#define ENPDNPS 0x0200
-#define LINKENA 0x0100
-#define DIS_SDSAVE 0x0010
-
-/* OCP_PHY_STATUS */
-#define PHY_STAT_MASK 0x0007
-#define PHY_STAT_EXT_INIT 2
-#define PHY_STAT_LAN_ON 3
-#define PHY_STAT_PWRDN 5
-
-/* OCP_NCTL_CFG */
-#define PGA_RETURN_EN BIT(1)
-
-/* OCP_POWER_CFG */
-#define EEE_CLKDIV_EN 0x8000
-#define EN_ALDPS 0x0004
-#define EN_10M_PLLOFF 0x0001
-
-/* OCP_EEE_CONFIG1 */
-#define RG_TXLPI_MSK_HFDUP 0x8000
-#define RG_MATCLR_EN 0x4000
-#define EEE_10_CAP 0x2000
-#define EEE_NWAY_EN 0x1000
-#define TX_QUIET_EN 0x0200
-#define RX_QUIET_EN 0x0100
-#define sd_rise_time_mask 0x0070
-#define sd_rise_time(x) (min(x, 7) << 4) /* bit 4 ~ 6 */
-#define RG_RXLPI_MSK_HFDUP 0x0008
-#define SDFALLTIME 0x0007 /* bit 0 ~ 2 */
-
-/* OCP_EEE_CONFIG2 */
-#define RG_LPIHYS_NUM 0x7000 /* bit 12 ~ 15 */
-#define RG_DACQUIET_EN 0x0400
-#define RG_LDVQUIET_EN 0x0200
-#define RG_CKRSEL 0x0020
-#define RG_EEEPRG_EN 0x0010
-
-/* OCP_EEE_CONFIG3 */
-#define fast_snr_mask 0xff80
-#define fast_snr(x) (min(x, 0x1ff) << 7) /* bit 7 ~ 15 */
-#define RG_LFS_SEL 0x0060 /* bit 6 ~ 5 */
-#define MSK_PH 0x0006 /* bit 0 ~ 3 */
-
-/* OCP_EEE_AR */
-/* bit[15:14] function */
-#define FUN_ADDR 0x0000
-#define FUN_DATA 0x4000
-/* bit[4:0] device addr */
-
-/* OCP_EEE_CFG */
-#define CTAP_SHORT_EN 0x0040
-#define EEE10_EN 0x0010
-
-/* OCP_DOWN_SPEED */
-#define EN_EEE_CMODE BIT(14)
-#define EN_EEE_1000 BIT(13)
-#define EN_EEE_100 BIT(12)
-#define EN_10M_CLKDIV BIT(11)
-#define EN_10M_BGOFF 0x0080
-
-/* OCP_10GBT_CTRL */
-#define RTL_ADV2_5G_F_R BIT(5) /* Advertise 2.5GBASE-T fast-retrain */
-
-/* OCP_PHY_STATE */
-#define TXDIS_STATE 0x01
-#define ABD_STATE 0x02
-
-/* OCP_PHY_PATCH_STAT */
-#define PATCH_READY BIT(6)
-
-/* OCP_PHY_PATCH_CMD */
-#define PATCH_REQUEST BIT(4)
-
-/* OCP_PHY_LOCK */
-#define PATCH_LOCK BIT(0)
-
-/* OCP_ADC_CFG */
-#define CKADSEL_L 0x0100
-#define ADC_EN 0x0080
-#define EN_EMI_L 0x0040
-
-/* OCP_SYSCLK_CFG */
-#define sysclk_div_expo(x) (min(x, 5) << 8)
-#define clk_div_expo(x) (min(x, 5) << 4)
-
-/* SRAM_GREEN_CFG */
-#define GREEN_ETH_EN BIT(15)
-#define R_TUNE_EN BIT(11)
-
-/* SRAM_LPF_CFG */
-#define LPF_AUTO_TUNE 0x8000
-
-/* SRAM_10M_AMP1 */
-#define GDAC_IB_UPALL 0x0008
-
-/* SRAM_10M_AMP2 */
-#define AMP_DN 0x0200
-
-/* SRAM_IMPEDANCE */
-#define RX_DRIVING_MASK 0x6000
-
-/* SRAM_PHY_LOCK */
-#define PHY_PATCH_LOCK 0x0001
-
-/* MAC PASSTHRU */
-#define AD_MASK 0xfee0
-#define BND_MASK 0x0004
-#define BD_MASK 0x0001
-#define EFUSE 0xcfdb
-#define PASS_THRU_MASK 0x1
-
-#define BP4_SUPER_ONLY 0x1578 /* RTL_VER_04 only */
enum rtl_register_content {
_2500bps = BIT(10),
@@ -739,8 +57,6 @@ enum rtl_register_content {
#define is_speed_2500(_speed) (((_speed) & (_2500bps | LINK_STATUS)) == (_2500bps | LINK_STATUS))
#define is_flow_control(_speed) (((_speed) & (_tx_flow | _rx_flow)) == (_tx_flow | _rx_flow))
-#define RTL8152_MAX_TX 4
-#define RTL8152_MAX_RX 10
#define INTBUFSIZE 2
#define TX_ALIGN 4
#define RX_ALIGN 8
@@ -831,343 +147,6 @@ struct tx_desc {
#define TX_VLAN_TAG BIT(16)
};
-struct r8152;
-
-struct rx_agg {
- struct list_head list, info_list;
- struct urb *urb;
- struct r8152 *context;
- struct page *page;
- void *buffer;
-};
-
-struct tx_agg {
- struct list_head list;
- struct urb *urb;
- struct r8152 *context;
- void *buffer;
- void *head;
- u32 skb_num;
- u32 skb_len;
-};
-
-struct r8152 {
- unsigned long flags;
- struct usb_device *udev;
- struct napi_struct napi;
- struct usb_interface *intf;
- struct net_device *netdev;
- struct urb *intr_urb;
- struct tx_agg tx_info[RTL8152_MAX_TX];
- struct list_head rx_info, rx_used;
- struct list_head rx_done, tx_free;
- struct sk_buff_head tx_queue, rx_queue;
- spinlock_t rx_lock, tx_lock;
- struct delayed_work schedule, hw_phy_work;
- struct mii_if_info mii;
- struct mutex control; /* use for hw setting */
-#ifdef CONFIG_PM_SLEEP
- struct notifier_block pm_notifier;
-#endif
- struct tasklet_struct tx_tl;
-
- struct rtl_ops {
- void (*init)(struct r8152 *tp);
- int (*enable)(struct r8152 *tp);
- void (*disable)(struct r8152 *tp);
- void (*up)(struct r8152 *tp);
- void (*down)(struct r8152 *tp);
- void (*unload)(struct r8152 *tp);
- int (*eee_get)(struct r8152 *tp, struct ethtool_eee *eee);
- int (*eee_set)(struct r8152 *tp, struct ethtool_eee *eee);
- bool (*in_nway)(struct r8152 *tp);
- void (*hw_phy_cfg)(struct r8152 *tp);
- void (*autosuspend_en)(struct r8152 *tp, bool enable);
- void (*change_mtu)(struct r8152 *tp);
- } rtl_ops;
-
- struct ups_info {
- u32 r_tune:1;
- u32 _10m_ckdiv:1;
- u32 _250m_ckdiv:1;
- u32 aldps:1;
- u32 lite_mode:2;
- u32 speed_duplex:4;
- u32 eee:1;
- u32 eee_lite:1;
- u32 eee_ckdiv:1;
- u32 eee_plloff_100:1;
- u32 eee_plloff_giga:1;
- u32 eee_cmod_lv:1;
- u32 green:1;
- u32 flow_control:1;
- u32 ctap_short_off:1;
- } ups_info;
-
-#define RTL_VER_SIZE 32
-
- struct rtl_fw {
- const char *fw_name;
- const struct firmware *fw;
-
- char version[RTL_VER_SIZE];
- int (*pre_fw)(struct r8152 *tp);
- int (*post_fw)(struct r8152 *tp);
-
- bool retry;
- } rtl_fw;
-
- atomic_t rx_count;
-
- bool eee_en;
- int intr_interval;
- u32 saved_wolopts;
- u32 msg_enable;
- u32 tx_qlen;
- u32 coalesce;
- u32 advertising;
- u32 rx_buf_sz;
- u32 rx_copybreak;
- u32 rx_pending;
- u32 fc_pause_on, fc_pause_off;
-
- unsigned int pipe_in, pipe_out, pipe_intr, pipe_ctrl_in, pipe_ctrl_out;
-
- u32 support_2500full:1;
- u32 lenovo_macpassthru:1;
- u32 dell_tb_rx_agg_bug:1;
- u16 ocp_base;
- u16 speed;
- u16 eee_adv;
- u8 *intr_buff;
- u8 version;
- u8 duplex;
- u8 autoneg;
-};
-
-/**
- * struct fw_block - block type and total length
- * @type: type of the current block, such as RTL_FW_END, RTL_FW_PLA,
- * RTL_FW_USB and so on.
- * @length: total length of the current block.
- */
-struct fw_block {
- __le32 type;
- __le32 length;
-} __packed;
-
-/**
- * struct fw_header - header of the firmware file
- * @checksum: checksum of sha256 which is calculated from the whole file
- * except the checksum field of the file. That is, calculate sha256
- * from the version field to the end of the file.
- * @version: version of this firmware.
- * @blocks: the first firmware block of the file
- */
-struct fw_header {
- u8 checksum[32];
- char version[RTL_VER_SIZE];
- struct fw_block blocks[];
-} __packed;
-
-enum rtl8152_fw_flags {
- FW_FLAGS_USB = 0,
- FW_FLAGS_PLA,
- FW_FLAGS_START,
- FW_FLAGS_STOP,
- FW_FLAGS_NC,
- FW_FLAGS_NC1,
- FW_FLAGS_NC2,
- FW_FLAGS_UC2,
- FW_FLAGS_UC,
- FW_FLAGS_SPEED_UP,
- FW_FLAGS_VER,
-};
-
-enum rtl8152_fw_fixup_cmd {
- FW_FIXUP_AND = 0,
- FW_FIXUP_OR,
- FW_FIXUP_NOT,
- FW_FIXUP_XOR,
-};
-
-struct fw_phy_set {
- __le16 addr;
- __le16 data;
-} __packed;
-
-struct fw_phy_speed_up {
- struct fw_block blk_hdr;
- __le16 fw_offset;
- __le16 version;
- __le16 fw_reg;
- __le16 reserved;
- char info[];
-} __packed;
-
-struct fw_phy_ver {
- struct fw_block blk_hdr;
- struct fw_phy_set ver;
- __le32 reserved;
-} __packed;
-
-struct fw_phy_fixup {
- struct fw_block blk_hdr;
- struct fw_phy_set setting;
- __le16 bit_cmd;
- __le16 reserved;
-} __packed;
-
-struct fw_phy_union {
- struct fw_block blk_hdr;
- __le16 fw_offset;
- __le16 fw_reg;
- struct fw_phy_set pre_set[2];
- struct fw_phy_set bp[8];
- struct fw_phy_set bp_en;
- u8 pre_num;
- u8 bp_num;
- char info[];
-} __packed;
-
-/**
- * struct fw_mac - a firmware block used by RTL_FW_PLA and RTL_FW_USB.
- * The layout of the firmware block is:
- * <struct fw_mac> + <info> + <firmware data>.
- * @blk_hdr: firmware descriptor (type, length)
- * @fw_offset: offset of the firmware binary data. The start address of
- * the data would be the address of struct fw_mac + @fw_offset.
- * @fw_reg: the register to load the firmware. Depends on chip.
- * @bp_ba_addr: the register to write break point base address. Depends on
- * chip.
- * @bp_ba_value: break point base address. Depends on chip.
- * @bp_en_addr: the register to write break point enabled mask. Depends
- * on chip.
- * @bp_en_value: break point enabled mask. Depends on the firmware.
- * @bp_start: the start register of break points. Depends on chip.
- * @bp_num: the break point number which needs to be set for this firmware.
- * Depends on the firmware.
- * @bp: break points. Depends on firmware.
- * @reserved: reserved space (unused)
- * @fw_ver_reg: the register to store the fw version.
- * @fw_ver_data: the firmware version of the current type.
- * @info: additional information for debugging, and is followed by the
- * binary data of firmware.
- */
-struct fw_mac {
- struct fw_block blk_hdr;
- __le16 fw_offset;
- __le16 fw_reg;
- __le16 bp_ba_addr;
- __le16 bp_ba_value;
- __le16 bp_en_addr;
- __le16 bp_en_value;
- __le16 bp_start;
- __le16 bp_num;
- __le16 bp[16]; /* any value determined by firmware */
- __le32 reserved;
- __le16 fw_ver_reg;
- u8 fw_ver_data;
- char info[];
-} __packed;
-
-/**
- * struct fw_phy_patch_key - a firmware block used by RTL_FW_PHY_START.
- * This is used to set patch key when loading the firmware of PHY.
- * @blk_hdr: firmware descriptor (type, length)
- * @key_reg: the register to write the patch key.
- * @key_data: patch key.
- * @reserved: reserved space (unused)
- */
-struct fw_phy_patch_key {
- struct fw_block blk_hdr;
- __le16 key_reg;
- __le16 key_data;
- __le32 reserved;
-} __packed;
-
-/**
- * struct fw_phy_nc - a firmware block used by RTL_FW_PHY_NC.
- * The layout of the firmware block is:
- * <struct fw_phy_nc> + <info> + <firmware data>.
- * @blk_hdr: firmware descriptor (type, length)
- * @fw_offset: offset of the firmware binary data. The start address of
- * the data would be the address of struct fw_phy_nc + @fw_offset.
- * @fw_reg: the register to load the firmware. Depends on chip.
- * @ba_reg: the register to write the base address. Depends on chip.
- * @ba_data: base address. Depends on chip.
- * @patch_en_addr: the register of enabling patch mode. Depends on chip.
- * @patch_en_value: patch mode enabled mask. Depends on the firmware.
- * @mode_reg: the regitster of switching the mode.
- * @mode_pre: the mode needing to be set before loading the firmware.
- * @mode_post: the mode to be set when finishing to load the firmware.
- * @reserved: reserved space (unused)
- * @bp_start: the start register of break points. Depends on chip.
- * @bp_num: the break point number which needs to be set for this firmware.
- * Depends on the firmware.
- * @bp: break points. Depends on firmware.
- * @info: additional information for debugging, and is followed by the
- * binary data of firmware.
- */
-struct fw_phy_nc {
- struct fw_block blk_hdr;
- __le16 fw_offset;
- __le16 fw_reg;
- __le16 ba_reg;
- __le16 ba_data;
- __le16 patch_en_addr;
- __le16 patch_en_value;
- __le16 mode_reg;
- __le16 mode_pre;
- __le16 mode_post;
- __le16 reserved;
- __le16 bp_start;
- __le16 bp_num;
- __le16 bp[4];
- char info[];
-} __packed;
-
-enum rtl_fw_type {
- RTL_FW_END = 0,
- RTL_FW_PLA,
- RTL_FW_USB,
- RTL_FW_PHY_START,
- RTL_FW_PHY_STOP,
- RTL_FW_PHY_NC,
- RTL_FW_PHY_FIXUP,
- RTL_FW_PHY_UNION_NC,
- RTL_FW_PHY_UNION_NC1,
- RTL_FW_PHY_UNION_NC2,
- RTL_FW_PHY_UNION_UC2,
- RTL_FW_PHY_UNION_UC,
- RTL_FW_PHY_UNION_MISC,
- RTL_FW_PHY_SPEED_UP,
- RTL_FW_PHY_VER,
-};
-
-enum rtl_version {
- RTL_VER_UNKNOWN = 0,
- RTL_VER_01,
- RTL_VER_02,
- RTL_VER_03,
- RTL_VER_04,
- RTL_VER_05,
- RTL_VER_06,
- RTL_VER_07,
- RTL_VER_08,
- RTL_VER_09,
-
- RTL_TEST_01,
- RTL_VER_10,
- RTL_VER_11,
- RTL_VER_12,
- RTL_VER_13,
- RTL_VER_14,
- RTL_VER_15,
-
- RTL_VER_MAX
-};
-
enum tx_csum_stat {
TX_CSUM_SUCCESS = 0,
TX_CSUM_TSO,
@@ -1240,8 +219,7 @@ static void rtl_set_unplug(struct r8152 *tp)
}
}
-static int generic_ocp_read(struct r8152 *tp, u16 index, u16 size,
- void *data, u16 type)
+int generic_ocp_read(struct r8152 *tp, u16 index, u16 size, void *data, u16 type)
{
u16 limit = 64;
int ret = 0;
@@ -1283,8 +261,7 @@ static int generic_ocp_read(struct r8152 *tp, u16 index, u16 size,
return ret;
}
-static int generic_ocp_write(struct r8152 *tp, u16 index, u16 byteen,
- u16 size, void *data, u16 type)
+int generic_ocp_write(struct r8152 *tp, u16 index, u16 byteen, u16 size, void *data, u16 type)
{
int ret;
u16 byteen_start, byteen_end, byen;
@@ -1371,7 +348,7 @@ int usb_ocp_write(struct r8152 *tp, u16 index, u16 byteen, u16 size, void *data)
return generic_ocp_write(tp, index, byteen, size, data, MCU_TYPE_USB);
}
-static u32 ocp_read_dword(struct r8152 *tp, u16 type, u16 index)
+u32 ocp_read_dword(struct r8152 *tp, u16 type, u16 index)
{
__le32 data;
@@ -1380,14 +357,14 @@ static u32 ocp_read_dword(struct r8152 *tp, u16 type, u16 index)
return __le32_to_cpu(data);
}
-static void ocp_write_dword(struct r8152 *tp, u16 type, u16 index, u32 data)
+void ocp_write_dword(struct r8152 *tp, u16 type, u16 index, u32 data)
{
__le32 tmp = __cpu_to_le32(data);
generic_ocp_write(tp, index, BYTE_EN_DWORD, sizeof(tmp), &tmp, type);
}
-static u16 ocp_read_word(struct r8152 *tp, u16 type, u16 index)
+u16 ocp_read_word(struct r8152 *tp, u16 type, u16 index)
{
u32 data;
__le32 tmp;
@@ -1406,7 +383,7 @@ static u16 ocp_read_word(struct r8152 *tp, u16 type, u16 index)
return (u16)data;
}
-static void ocp_write_word(struct r8152 *tp, u16 type, u16 index, u32 data)
+void ocp_write_word(struct r8152 *tp, u16 type, u16 index, u32 data)
{
u32 mask = 0xffff;
__le32 tmp;
@@ -1427,7 +404,7 @@ static void ocp_write_word(struct r8152 *tp, u16 type, u16 index, u32 data)
generic_ocp_write(tp, index, byen, sizeof(tmp), &tmp, type);
}
-static u8 ocp_read_byte(struct r8152 *tp, u16 type, u16 index)
+u8 ocp_read_byte(struct r8152 *tp, u16 type, u16 index)
{
u32 data;
__le32 tmp;
@@ -1444,7 +421,7 @@ static u8 ocp_read_byte(struct r8152 *tp, u16 type, u16 index)
return (u8)data;
}
-static void ocp_write_byte(struct r8152 *tp, u16 type, u16 index, u32 data)
+void ocp_write_byte(struct r8152 *tp, u16 type, u16 index, u32 data)
{
u32 mask = 0xff;
__le32 tmp;
@@ -1465,7 +442,7 @@ static void ocp_write_byte(struct r8152 *tp, u16 type, u16 index, u32 data)
generic_ocp_write(tp, index, byen, sizeof(tmp), &tmp, type);
}
-static u16 ocp_reg_read(struct r8152 *tp, u16 addr)
+u16 ocp_reg_read(struct r8152 *tp, u16 addr)
{
u16 ocp_base, ocp_index;
@@ -1479,7 +456,7 @@ static u16 ocp_reg_read(struct r8152 *tp, u16 addr)
return ocp_read_word(tp, MCU_TYPE_PLA, ocp_index);
}
-static void ocp_reg_write(struct r8152 *tp, u16 addr, u16 data)
+void ocp_reg_write(struct r8152 *tp, u16 addr, u16 data)
{
u16 ocp_base, ocp_index;
@@ -1503,13 +480,13 @@ static inline int r8152_mdio_read(struct r8152 *tp, u32 reg_addr)
return ocp_reg_read(tp, OCP_BASE_MII + reg_addr * 2);
}
-static void sram_write(struct r8152 *tp, u16 addr, u16 data)
+void sram_write(struct r8152 *tp, u16 addr, u16 data)
{
ocp_reg_write(tp, OCP_SRAM_ADDR, addr);
ocp_reg_write(tp, OCP_SRAM_DATA, data);
}
-static u16 sram_read(struct r8152 *tp, u16 addr)
+u16 sram_read(struct r8152 *tp, u16 addr)
{
ocp_reg_write(tp, OCP_SRAM_ADDR, addr);
return ocp_reg_read(tp, OCP_SRAM_DATA);
@@ -1605,7 +582,7 @@ static int vendor_mac_passthru_addr_read(struct r8152 *tp, struct sockaddr *sa)
ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
if ((ocp_data & AD_MASK) == 0x1000) {
/* test for MAC address pass-through bit */
- ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, EFUSE);
+ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_EFUSE);
if ((ocp_data & PASS_THRU_MASK) != 1) {
netif_dbg(tp, probe, tp->netdev,
"No efuse for RTL8153-AD MAC pass through\n");
@@ -3845,1275 +2822,125 @@ static void rtl8153b_runtime_enable(struct r8152 *tp, bool enable)
r8153_queue_wake(tp, false);
rtl_runtime_suspend_enable(tp, false);
if (tp->udev->speed >= USB_SPEED_SUPER)
- r8153b_u1u2en(tp, true);
- }
-}
-
-static void rtl8153c_runtime_enable(struct r8152 *tp, bool enable)
-{
- if (enable) {
- r8153_queue_wake(tp, true);
- r8153b_u1u2en(tp, false);
- r8153_u2p3en(tp, false);
- rtl_runtime_suspend_enable(tp, true);
- r8153c_ups_en(tp, true);
- } else {
- r8153c_ups_en(tp, false);
- r8153_queue_wake(tp, false);
- rtl_runtime_suspend_enable(tp, false);
- r8153b_u1u2en(tp, true);
- }
-}
-
-static void rtl8156_runtime_enable(struct r8152 *tp, bool enable)
-{
- if (enable) {
- r8153_queue_wake(tp, true);
- r8153b_u1u2en(tp, false);
- r8153_u2p3en(tp, false);
- rtl_runtime_suspend_enable(tp, true);
- } else {
- r8153_queue_wake(tp, false);
- rtl_runtime_suspend_enable(tp, false);
- r8153_u2p3en(tp, true);
- if (tp->udev->speed >= USB_SPEED_SUPER)
- r8153b_u1u2en(tp, true);
- }
-}
-
-static void r8153_teredo_off(struct r8152 *tp)
-{
- u32 ocp_data;
-
- switch (tp->version) {
- case RTL_VER_01:
- case RTL_VER_02:
- case RTL_VER_03:
- case RTL_VER_04:
- case RTL_VER_05:
- case RTL_VER_06:
- case RTL_VER_07:
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG);
- ocp_data &= ~(TEREDO_SEL | TEREDO_RS_EVENT_MASK |
- OOB_TEREDO_EN);
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, ocp_data);
- break;
-
- case RTL_VER_08:
- case RTL_VER_09:
- case RTL_TEST_01:
- case RTL_VER_10:
- case RTL_VER_11:
- case RTL_VER_12:
- case RTL_VER_13:
- case RTL_VER_14:
- case RTL_VER_15:
- default:
- /* The bit 0 ~ 7 are relative with teredo settings. They are
- * W1C (write 1 to clear), so set all 1 to disable it.
- */
- ocp_write_byte(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, 0xff);
- break;
- }
-
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_WDT6_CTRL, WDT6_SET_MODE);
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_REALWOW_TIMER, 0);
- ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TEREDO_TIMER, 0);
-}
-
-static void rtl_reset_bmu(struct r8152 *tp)
-{
- u32 ocp_data;
-
- ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_BMU_RESET);
- ocp_data &= ~(BMU_RESET_EP_IN | BMU_RESET_EP_OUT);
- ocp_write_byte(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data);
- ocp_data |= BMU_RESET_EP_IN | BMU_RESET_EP_OUT;
- ocp_write_byte(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data);
-}
-
-/* Clear the bp to stop the firmware before loading a new one */
-static void rtl_clear_bp(struct r8152 *tp, u16 type)
-{
- switch (tp->version) {
- case RTL_VER_01:
- case RTL_VER_02:
- case RTL_VER_07:
- break;
- case RTL_VER_03:
- case RTL_VER_04:
- case RTL_VER_05:
- case RTL_VER_06:
- ocp_write_byte(tp, type, PLA_BP_EN, 0);
- break;
- case RTL_VER_08:
- case RTL_VER_09:
- case RTL_VER_10:
- case RTL_VER_11:
- case RTL_VER_12:
- case RTL_VER_13:
- case RTL_VER_14:
- case RTL_VER_15:
- default:
- if (type == MCU_TYPE_USB) {
- ocp_write_byte(tp, MCU_TYPE_USB, USB_BP2_EN, 0);
-
- ocp_write_word(tp, MCU_TYPE_USB, USB_BP_8, 0);
- ocp_write_word(tp, MCU_TYPE_USB, USB_BP_9, 0);
- ocp_write_word(tp, MCU_TYPE_USB, USB_BP_10, 0);
- ocp_write_word(tp, MCU_TYPE_USB, USB_BP_11, 0);
- ocp_write_word(tp, MCU_TYPE_USB, USB_BP_12, 0);
- ocp_write_word(tp, MCU_TYPE_USB, USB_BP_13, 0);
- ocp_write_word(tp, MCU_TYPE_USB, USB_BP_14, 0);
- ocp_write_word(tp, MCU_TYPE_USB, USB_BP_15, 0);
- } else {
- ocp_write_byte(tp, MCU_TYPE_PLA, PLA_BP_EN, 0);
- }
- break;
- }
-
- ocp_write_word(tp, type, PLA_BP_0, 0);
- ocp_write_word(tp, type, PLA_BP_1, 0);
- ocp_write_word(tp, type, PLA_BP_2, 0);
- ocp_write_word(tp, type, PLA_BP_3, 0);
- ocp_write_word(tp, type, PLA_BP_4, 0);
- ocp_write_word(tp, type, PLA_BP_5, 0);
- ocp_write_word(tp, type, PLA_BP_6, 0);
- ocp_write_word(tp, type, PLA_BP_7, 0);
-
- /* wait 3 ms to make sure the firmware is stopped */
- usleep_range(3000, 6000);
- ocp_write_word(tp, type, PLA_BP_BA, 0);
-}
-
-static int rtl_phy_patch_request(struct r8152 *tp, bool request, bool wait)
-{
- u16 data, check;
- int i;
-
- data = ocp_reg_read(tp, OCP_PHY_PATCH_CMD);
- if (request) {
- data |= PATCH_REQUEST;
- check = 0;
- } else {
- data &= ~PATCH_REQUEST;
- check = PATCH_READY;
- }
- ocp_reg_write(tp, OCP_PHY_PATCH_CMD, data);
-
- for (i = 0; wait && i < 5000; i++) {
- u32 ocp_data;
-
- usleep_range(1000, 2000);
- ocp_data = ocp_reg_read(tp, OCP_PHY_PATCH_STAT);
- if ((ocp_data & PATCH_READY) ^ check)
- break;
- }
-
- if (request && wait &&
- !(ocp_reg_read(tp, OCP_PHY_PATCH_STAT) & PATCH_READY)) {
- dev_err(&tp->intf->dev, "PHY patch request fail\n");
- rtl_phy_patch_request(tp, false, false);
- return -ETIME;
- } else {
- return 0;
- }
-}
-
-static void rtl_patch_key_set(struct r8152 *tp, u16 key_addr, u16 patch_key)
-{
- if (patch_key && key_addr) {
- sram_write(tp, key_addr, patch_key);
- sram_write(tp, SRAM_PHY_LOCK, PHY_PATCH_LOCK);
- } else if (key_addr) {
- u16 data;
-
- sram_write(tp, 0x0000, 0x0000);
-
- data = ocp_reg_read(tp, OCP_PHY_LOCK);
- data &= ~PATCH_LOCK;
- ocp_reg_write(tp, OCP_PHY_LOCK, data);
-
- sram_write(tp, key_addr, 0x0000);
- } else {
- WARN_ON_ONCE(1);
- }
-}
-
-static int
-rtl_pre_ram_code(struct r8152 *tp, u16 key_addr, u16 patch_key, bool wait)
-{
- if (rtl_phy_patch_request(tp, true, wait))
- return -ETIME;
-
- rtl_patch_key_set(tp, key_addr, patch_key);
-
- return 0;
-}
-
-static int rtl_post_ram_code(struct r8152 *tp, u16 key_addr, bool wait)
-{
- rtl_patch_key_set(tp, key_addr, 0);
-
- rtl_phy_patch_request(tp, false, wait);
-
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, tp->ocp_base);
-
- return 0;
-}
-
-static bool rtl8152_is_fw_phy_speed_up_ok(struct r8152 *tp, struct fw_phy_speed_up *phy)
-{
- u16 fw_offset;
- u32 length;
- bool rc = false;
-
- switch (tp->version) {
- case RTL_VER_01:
- case RTL_VER_02:
- case RTL_VER_03:
- case RTL_VER_04:
- case RTL_VER_05:
- case RTL_VER_06:
- case RTL_VER_07:
- case RTL_VER_08:
- case RTL_VER_09:
- case RTL_VER_10:
- case RTL_VER_11:
- case RTL_VER_12:
- case RTL_VER_14:
- goto out;
- case RTL_VER_13:
- case RTL_VER_15:
- default:
- break;
- }
-
- fw_offset = __le16_to_cpu(phy->fw_offset);
- length = __le32_to_cpu(phy->blk_hdr.length);
- if (fw_offset < sizeof(*phy) || length <= fw_offset) {
- dev_err(&tp->intf->dev, "invalid fw_offset\n");
- goto out;
- }
-
- length -= fw_offset;
- if (length & 3) {
- dev_err(&tp->intf->dev, "invalid block length\n");
- goto out;
- }
-
- if (__le16_to_cpu(phy->fw_reg) != 0x9A00) {
- dev_err(&tp->intf->dev, "invalid register to load firmware\n");
- goto out;
- }
-
- rc = true;
-out:
- return rc;
-}
-
-static bool rtl8152_is_fw_phy_ver_ok(struct r8152 *tp, struct fw_phy_ver *ver)
-{
- bool rc = false;
-
- switch (tp->version) {
- case RTL_VER_10:
- case RTL_VER_11:
- case RTL_VER_12:
- case RTL_VER_13:
- case RTL_VER_15:
- break;
- default:
- goto out;
- }
-
- if (__le32_to_cpu(ver->blk_hdr.length) != sizeof(*ver)) {
- dev_err(&tp->intf->dev, "invalid block length\n");
- goto out;
- }
-
- if (__le16_to_cpu(ver->ver.addr) != SRAM_GPHY_FW_VER) {
- dev_err(&tp->intf->dev, "invalid phy ver addr\n");
- goto out;
- }
-
- rc = true;
-out:
- return rc;
-}
-
-static bool rtl8152_is_fw_phy_fixup_ok(struct r8152 *tp, struct fw_phy_fixup *fix)
-{
- bool rc = false;
-
- switch (tp->version) {
- case RTL_VER_10:
- case RTL_VER_11:
- case RTL_VER_12:
- case RTL_VER_13:
- case RTL_VER_15:
- break;
- default:
- goto out;
- }
-
- if (__le32_to_cpu(fix->blk_hdr.length) != sizeof(*fix)) {
- dev_err(&tp->intf->dev, "invalid block length\n");
- goto out;
- }
-
- if (__le16_to_cpu(fix->setting.addr) != OCP_PHY_PATCH_CMD ||
- __le16_to_cpu(fix->setting.data) != BIT(7)) {
- dev_err(&tp->intf->dev, "invalid phy fixup\n");
- goto out;
- }
-
- rc = true;
-out:
- return rc;
-}
-
-static bool rtl8152_is_fw_phy_union_ok(struct r8152 *tp, struct fw_phy_union *phy)
-{
- u16 fw_offset;
- u32 length;
- bool rc = false;
-
- switch (tp->version) {
- case RTL_VER_10:
- case RTL_VER_11:
- case RTL_VER_12:
- case RTL_VER_13:
- case RTL_VER_15:
- break;
- default:
- goto out;
- }
-
- fw_offset = __le16_to_cpu(phy->fw_offset);
- length = __le32_to_cpu(phy->blk_hdr.length);
- if (fw_offset < sizeof(*phy) || length <= fw_offset) {
- dev_err(&tp->intf->dev, "invalid fw_offset\n");
- goto out;
- }
-
- length -= fw_offset;
- if (length & 1) {
- dev_err(&tp->intf->dev, "invalid block length\n");
- goto out;
- }
-
- if (phy->pre_num > 2) {
- dev_err(&tp->intf->dev, "invalid pre_num %d\n", phy->pre_num);
- goto out;
- }
-
- if (phy->bp_num > 8) {
- dev_err(&tp->intf->dev, "invalid bp_num %d\n", phy->bp_num);
- goto out;
- }
-
- rc = true;
-out:
- return rc;
-}
-
-static bool rtl8152_is_fw_phy_nc_ok(struct r8152 *tp, struct fw_phy_nc *phy)
-{
- u32 length;
- u16 fw_offset, fw_reg, ba_reg, patch_en_addr, mode_reg, bp_start;
- bool rc = false;
-
- switch (tp->version) {
- case RTL_VER_04:
- case RTL_VER_05:
- case RTL_VER_06:
- fw_reg = 0xa014;
- ba_reg = 0xa012;
- patch_en_addr = 0xa01a;
- mode_reg = 0xb820;
- bp_start = 0xa000;
- break;
- default:
- goto out;
- }
-
- fw_offset = __le16_to_cpu(phy->fw_offset);
- if (fw_offset < sizeof(*phy)) {
- dev_err(&tp->intf->dev, "fw_offset too small\n");
- goto out;
- }
-
- length = __le32_to_cpu(phy->blk_hdr.length);
- if (length < fw_offset) {
- dev_err(&tp->intf->dev, "invalid fw_offset\n");
- goto out;
- }
-
- length -= __le16_to_cpu(phy->fw_offset);
- if (!length || (length & 1)) {
- dev_err(&tp->intf->dev, "invalid block length\n");
- goto out;
- }
-
- if (__le16_to_cpu(phy->fw_reg) != fw_reg) {
- dev_err(&tp->intf->dev, "invalid register to load firmware\n");
- goto out;
- }
-
- if (__le16_to_cpu(phy->ba_reg) != ba_reg) {
- dev_err(&tp->intf->dev, "invalid base address register\n");
- goto out;
- }
-
- if (__le16_to_cpu(phy->patch_en_addr) != patch_en_addr) {
- dev_err(&tp->intf->dev,
- "invalid patch mode enabled register\n");
- goto out;
- }
-
- if (__le16_to_cpu(phy->mode_reg) != mode_reg) {
- dev_err(&tp->intf->dev,
- "invalid register to switch the mode\n");
- goto out;
- }
-
- if (__le16_to_cpu(phy->bp_start) != bp_start) {
- dev_err(&tp->intf->dev,
- "invalid start register of break point\n");
- goto out;
- }
-
- if (__le16_to_cpu(phy->bp_num) > 4) {
- dev_err(&tp->intf->dev, "invalid break point number\n");
- goto out;
- }
-
- rc = true;
-out:
- return rc;
-}
-
-static bool rtl8152_is_fw_mac_ok(struct r8152 *tp, struct fw_mac *mac)
-{
- u16 fw_reg, bp_ba_addr, bp_en_addr, bp_start, fw_offset;
- bool rc = false;
- u32 length, type;
- int i, max_bp;
-
- type = __le32_to_cpu(mac->blk_hdr.type);
- if (type == RTL_FW_PLA) {
- switch (tp->version) {
- case RTL_VER_01:
- case RTL_VER_02:
- case RTL_VER_07:
- fw_reg = 0xf800;
- bp_ba_addr = PLA_BP_BA;
- bp_en_addr = 0;
- bp_start = PLA_BP_0;
- max_bp = 8;
- break;
- case RTL_VER_03:
- case RTL_VER_04:
- case RTL_VER_05:
- case RTL_VER_06:
- case RTL_VER_08:
- case RTL_VER_09:
- case RTL_VER_11:
- case RTL_VER_12:
- case RTL_VER_13:
- case RTL_VER_14:
- case RTL_VER_15:
- fw_reg = 0xf800;
- bp_ba_addr = PLA_BP_BA;
- bp_en_addr = PLA_BP_EN;
- bp_start = PLA_BP_0;
- max_bp = 8;
- break;
- default:
- goto out;
- }
- } else if (type == RTL_FW_USB) {
- switch (tp->version) {
- case RTL_VER_03:
- case RTL_VER_04:
- case RTL_VER_05:
- case RTL_VER_06:
- fw_reg = 0xf800;
- bp_ba_addr = USB_BP_BA;
- bp_en_addr = USB_BP_EN;
- bp_start = USB_BP_0;
- max_bp = 8;
- break;
- case RTL_VER_08:
- case RTL_VER_09:
- case RTL_VER_11:
- case RTL_VER_12:
- case RTL_VER_13:
- case RTL_VER_14:
- case RTL_VER_15:
- fw_reg = 0xe600;
- bp_ba_addr = USB_BP_BA;
- bp_en_addr = USB_BP2_EN;
- bp_start = USB_BP_0;
- max_bp = 16;
- break;
- case RTL_VER_01:
- case RTL_VER_02:
- case RTL_VER_07:
- default:
- goto out;
- }
- } else {
- goto out;
- }
-
- fw_offset = __le16_to_cpu(mac->fw_offset);
- if (fw_offset < sizeof(*mac)) {
- dev_err(&tp->intf->dev, "fw_offset too small\n");
- goto out;
- }
-
- length = __le32_to_cpu(mac->blk_hdr.length);
- if (length < fw_offset) {
- dev_err(&tp->intf->dev, "invalid fw_offset\n");
- goto out;
- }
-
- length -= fw_offset;
- if (length < 4 || (length & 3)) {
- dev_err(&tp->intf->dev, "invalid block length\n");
- goto out;
- }
-
- if (__le16_to_cpu(mac->fw_reg) != fw_reg) {
- dev_err(&tp->intf->dev, "invalid register to load firmware\n");
- goto out;
- }
-
- if (__le16_to_cpu(mac->bp_ba_addr) != bp_ba_addr) {
- dev_err(&tp->intf->dev, "invalid base address register\n");
- goto out;
- }
-
- if (__le16_to_cpu(mac->bp_en_addr) != bp_en_addr) {
- dev_err(&tp->intf->dev, "invalid enabled mask register\n");
- goto out;
- }
-
- if (__le16_to_cpu(mac->bp_start) != bp_start) {
- dev_err(&tp->intf->dev,
- "invalid start register of break point\n");
- goto out;
- }
-
- if (__le16_to_cpu(mac->bp_num) > max_bp) {
- dev_err(&tp->intf->dev, "invalid break point number\n");
- goto out;
- }
-
- for (i = __le16_to_cpu(mac->bp_num); i < max_bp; i++) {
- if (mac->bp[i]) {
- dev_err(&tp->intf->dev, "unused bp%u is not zero\n", i);
- goto out;
- }
- }
-
- rc = true;
-out:
- return rc;
-}
-
-/* Verify the checksum for the firmware file. It is calculated from the version
- * field to the end of the file. Compare the result with the checksum field to
- * make sure the file is correct.
- */
-static long rtl8152_fw_verify_checksum(struct r8152 *tp,
- struct fw_header *fw_hdr, size_t size)
-{
- unsigned char checksum[sizeof(fw_hdr->checksum)];
- struct crypto_shash *alg;
- struct shash_desc *sdesc;
- size_t len;
- long rc;
-
- alg = crypto_alloc_shash("sha256", 0, 0);
- if (IS_ERR(alg)) {
- rc = PTR_ERR(alg);
- goto out;
- }
-
- if (crypto_shash_digestsize(alg) != sizeof(fw_hdr->checksum)) {
- rc = -EFAULT;
- dev_err(&tp->intf->dev, "digestsize incorrect (%u)\n",
- crypto_shash_digestsize(alg));
- goto free_shash;
- }
-
- len = sizeof(*sdesc) + crypto_shash_descsize(alg);
- sdesc = kmalloc(len, GFP_KERNEL);
- if (!sdesc) {
- rc = -ENOMEM;
- goto free_shash;
- }
- sdesc->tfm = alg;
-
- len = size - sizeof(fw_hdr->checksum);
- rc = crypto_shash_digest(sdesc, fw_hdr->version, len, checksum);
- kfree(sdesc);
- if (rc)
- goto free_shash;
-
- if (memcmp(fw_hdr->checksum, checksum, sizeof(fw_hdr->checksum))) {
- dev_err(&tp->intf->dev, "checksum fail\n");
- rc = -EFAULT;
- }
-
-free_shash:
- crypto_free_shash(alg);
-out:
- return rc;
-}
-
-static long rtl8152_check_firmware(struct r8152 *tp, struct rtl_fw *rtl_fw)
-{
- const struct firmware *fw = rtl_fw->fw;
- struct fw_header *fw_hdr = (struct fw_header *)fw->data;
- unsigned long fw_flags = 0;
- long ret = -EFAULT;
- int i;
-
- if (fw->size < sizeof(*fw_hdr)) {
- dev_err(&tp->intf->dev, "file too small\n");
- goto fail;
- }
-
- ret = rtl8152_fw_verify_checksum(tp, fw_hdr, fw->size);
- if (ret)
- goto fail;
-
- ret = -EFAULT;
-
- for (i = sizeof(*fw_hdr); i < fw->size;) {
- struct fw_block *block = (struct fw_block *)&fw->data[i];
- u32 type;
-
- if ((i + sizeof(*block)) > fw->size)
- goto fail;
-
- type = __le32_to_cpu(block->type);
- switch (type) {
- case RTL_FW_END:
- if (__le32_to_cpu(block->length) != sizeof(*block))
- goto fail;
- goto fw_end;
- case RTL_FW_PLA:
- if (test_bit(FW_FLAGS_PLA, &fw_flags)) {
- dev_err(&tp->intf->dev,
- "multiple PLA firmware encountered");
- goto fail;
- }
-
- if (!rtl8152_is_fw_mac_ok(tp, (struct fw_mac *)block)) {
- dev_err(&tp->intf->dev,
- "check PLA firmware failed\n");
- goto fail;
- }
- __set_bit(FW_FLAGS_PLA, &fw_flags);
- break;
- case RTL_FW_USB:
- if (test_bit(FW_FLAGS_USB, &fw_flags)) {
- dev_err(&tp->intf->dev,
- "multiple USB firmware encountered");
- goto fail;
- }
-
- if (!rtl8152_is_fw_mac_ok(tp, (struct fw_mac *)block)) {
- dev_err(&tp->intf->dev,
- "check USB firmware failed\n");
- goto fail;
- }
- __set_bit(FW_FLAGS_USB, &fw_flags);
- break;
- case RTL_FW_PHY_START:
- if (test_bit(FW_FLAGS_START, &fw_flags) ||
- test_bit(FW_FLAGS_NC, &fw_flags) ||
- test_bit(FW_FLAGS_NC1, &fw_flags) ||
- test_bit(FW_FLAGS_NC2, &fw_flags) ||
- test_bit(FW_FLAGS_UC2, &fw_flags) ||
- test_bit(FW_FLAGS_UC, &fw_flags) ||
- test_bit(FW_FLAGS_STOP, &fw_flags)) {
- dev_err(&tp->intf->dev,
- "check PHY_START fail\n");
- goto fail;
- }
-
- if (__le32_to_cpu(block->length) != sizeof(struct fw_phy_patch_key)) {
- dev_err(&tp->intf->dev,
- "Invalid length for PHY_START\n");
- goto fail;
- }
- __set_bit(FW_FLAGS_START, &fw_flags);
- break;
- case RTL_FW_PHY_STOP:
- if (test_bit(FW_FLAGS_STOP, &fw_flags) ||
- !test_bit(FW_FLAGS_START, &fw_flags)) {
- dev_err(&tp->intf->dev,
- "Check PHY_STOP fail\n");
- goto fail;
- }
-
- if (__le32_to_cpu(block->length) != sizeof(*block)) {
- dev_err(&tp->intf->dev,
- "Invalid length for PHY_STOP\n");
- goto fail;
- }
- __set_bit(FW_FLAGS_STOP, &fw_flags);
- break;
- case RTL_FW_PHY_NC:
- if (!test_bit(FW_FLAGS_START, &fw_flags) ||
- test_bit(FW_FLAGS_STOP, &fw_flags)) {
- dev_err(&tp->intf->dev,
- "check PHY_NC fail\n");
- goto fail;
- }
-
- if (test_bit(FW_FLAGS_NC, &fw_flags)) {
- dev_err(&tp->intf->dev,
- "multiple PHY NC encountered\n");
- goto fail;
- }
-
- if (!rtl8152_is_fw_phy_nc_ok(tp, (struct fw_phy_nc *)block)) {
- dev_err(&tp->intf->dev,
- "check PHY NC firmware failed\n");
- goto fail;
- }
- __set_bit(FW_FLAGS_NC, &fw_flags);
- break;
- case RTL_FW_PHY_UNION_NC:
- if (!test_bit(FW_FLAGS_START, &fw_flags) ||
- test_bit(FW_FLAGS_NC1, &fw_flags) ||
- test_bit(FW_FLAGS_NC2, &fw_flags) ||
- test_bit(FW_FLAGS_UC2, &fw_flags) ||
- test_bit(FW_FLAGS_UC, &fw_flags) ||
- test_bit(FW_FLAGS_STOP, &fw_flags)) {
- dev_err(&tp->intf->dev, "PHY_UNION_NC out of order\n");
- goto fail;
- }
-
- if (test_bit(FW_FLAGS_NC, &fw_flags)) {
- dev_err(&tp->intf->dev, "multiple PHY_UNION_NC encountered\n");
- goto fail;
- }
-
- if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) {
- dev_err(&tp->intf->dev, "check PHY_UNION_NC failed\n");
- goto fail;
- }
- __set_bit(FW_FLAGS_NC, &fw_flags);
- break;
- case RTL_FW_PHY_UNION_NC1:
- if (!test_bit(FW_FLAGS_START, &fw_flags) ||
- test_bit(FW_FLAGS_NC2, &fw_flags) ||
- test_bit(FW_FLAGS_UC2, &fw_flags) ||
- test_bit(FW_FLAGS_UC, &fw_flags) ||
- test_bit(FW_FLAGS_STOP, &fw_flags)) {
- dev_err(&tp->intf->dev, "PHY_UNION_NC1 out of order\n");
- goto fail;
- }
-
- if (test_bit(FW_FLAGS_NC1, &fw_flags)) {
- dev_err(&tp->intf->dev, "multiple PHY NC1 encountered\n");
- goto fail;
- }
-
- if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) {
- dev_err(&tp->intf->dev, "check PHY_UNION_NC1 failed\n");
- goto fail;
- }
- __set_bit(FW_FLAGS_NC1, &fw_flags);
- break;
- case RTL_FW_PHY_UNION_NC2:
- if (!test_bit(FW_FLAGS_START, &fw_flags) ||
- test_bit(FW_FLAGS_UC2, &fw_flags) ||
- test_bit(FW_FLAGS_UC, &fw_flags) ||
- test_bit(FW_FLAGS_STOP, &fw_flags)) {
- dev_err(&tp->intf->dev, "PHY_UNION_NC2 out of order\n");
- goto fail;
- }
-
- if (test_bit(FW_FLAGS_NC2, &fw_flags)) {
- dev_err(&tp->intf->dev, "multiple PHY NC2 encountered\n");
- goto fail;
- }
-
- if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) {
- dev_err(&tp->intf->dev, "check PHY_UNION_NC2 failed\n");
- goto fail;
- }
- __set_bit(FW_FLAGS_NC2, &fw_flags);
- break;
- case RTL_FW_PHY_UNION_UC2:
- if (!test_bit(FW_FLAGS_START, &fw_flags) ||
- test_bit(FW_FLAGS_UC, &fw_flags) ||
- test_bit(FW_FLAGS_STOP, &fw_flags)) {
- dev_err(&tp->intf->dev, "PHY_UNION_UC2 out of order\n");
- goto fail;
- }
-
- if (test_bit(FW_FLAGS_UC2, &fw_flags)) {
- dev_err(&tp->intf->dev, "multiple PHY UC2 encountered\n");
- goto fail;
- }
-
- if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) {
- dev_err(&tp->intf->dev, "check PHY_UNION_UC2 failed\n");
- goto fail;
- }
- __set_bit(FW_FLAGS_UC2, &fw_flags);
- break;
- case RTL_FW_PHY_UNION_UC:
- if (!test_bit(FW_FLAGS_START, &fw_flags) ||
- test_bit(FW_FLAGS_STOP, &fw_flags)) {
- dev_err(&tp->intf->dev, "PHY_UNION_UC out of order\n");
- goto fail;
- }
-
- if (test_bit(FW_FLAGS_UC, &fw_flags)) {
- dev_err(&tp->intf->dev, "multiple PHY UC encountered\n");
- goto fail;
- }
-
- if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) {
- dev_err(&tp->intf->dev, "check PHY_UNION_UC failed\n");
- goto fail;
- }
- __set_bit(FW_FLAGS_UC, &fw_flags);
- break;
- case RTL_FW_PHY_UNION_MISC:
- if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) {
- dev_err(&tp->intf->dev, "check RTL_FW_PHY_UNION_MISC failed\n");
- goto fail;
- }
- break;
- case RTL_FW_PHY_FIXUP:
- if (!rtl8152_is_fw_phy_fixup_ok(tp, (struct fw_phy_fixup *)block)) {
- dev_err(&tp->intf->dev, "check PHY fixup failed\n");
- goto fail;
- }
- break;
- case RTL_FW_PHY_SPEED_UP:
- if (test_bit(FW_FLAGS_SPEED_UP, &fw_flags)) {
- dev_err(&tp->intf->dev, "multiple PHY firmware encountered");
- goto fail;
- }
-
- if (!rtl8152_is_fw_phy_speed_up_ok(tp, (struct fw_phy_speed_up *)block)) {
- dev_err(&tp->intf->dev, "check PHY speed up failed\n");
- goto fail;
- }
- __set_bit(FW_FLAGS_SPEED_UP, &fw_flags);
- break;
- case RTL_FW_PHY_VER:
- if (test_bit(FW_FLAGS_START, &fw_flags) ||
- test_bit(FW_FLAGS_NC, &fw_flags) ||
- test_bit(FW_FLAGS_NC1, &fw_flags) ||
- test_bit(FW_FLAGS_NC2, &fw_flags) ||
- test_bit(FW_FLAGS_UC2, &fw_flags) ||
- test_bit(FW_FLAGS_UC, &fw_flags) ||
- test_bit(FW_FLAGS_STOP, &fw_flags)) {
- dev_err(&tp->intf->dev, "Invalid order to set PHY version\n");
- goto fail;
- }
-
- if (test_bit(FW_FLAGS_VER, &fw_flags)) {
- dev_err(&tp->intf->dev, "multiple PHY version encountered");
- goto fail;
- }
-
- if (!rtl8152_is_fw_phy_ver_ok(tp, (struct fw_phy_ver *)block)) {
- dev_err(&tp->intf->dev, "check PHY version failed\n");
- goto fail;
- }
- __set_bit(FW_FLAGS_VER, &fw_flags);
- break;
- default:
- dev_warn(&tp->intf->dev, "Unknown type %u is found\n",
- type);
- break;
- }
-
- /* next block */
- i += ALIGN(__le32_to_cpu(block->length), 8);
- }
-
-fw_end:
- if (test_bit(FW_FLAGS_START, &fw_flags) && !test_bit(FW_FLAGS_STOP, &fw_flags)) {
- dev_err(&tp->intf->dev, "without PHY_STOP\n");
- goto fail;
- }
-
- return 0;
-fail:
- return ret;
-}
-
-static void rtl_ram_code_speed_up(struct r8152 *tp, struct fw_phy_speed_up *phy, bool wait)
-{
- u32 len;
- u8 *data;
-
- if (sram_read(tp, SRAM_GPHY_FW_VER) >= __le16_to_cpu(phy->version)) {
- dev_dbg(&tp->intf->dev, "PHY firmware has been the newest\n");
- return;
- }
-
- len = __le32_to_cpu(phy->blk_hdr.length);
- len -= __le16_to_cpu(phy->fw_offset);
- data = (u8 *)phy + __le16_to_cpu(phy->fw_offset);
-
- if (rtl_phy_patch_request(tp, true, wait))
- return;
-
- while (len) {
- u32 ocp_data, size;
- int i;
-
- if (len < 2048)
- size = len;
- else
- size = 2048;
-
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_GPHY_CTRL);
- ocp_data |= GPHY_PATCH_DONE | BACKUP_RESTRORE;
- ocp_write_word(tp, MCU_TYPE_USB, USB_GPHY_CTRL, ocp_data);
-
- generic_ocp_write(tp, __le16_to_cpu(phy->fw_reg), 0xff, size, data, MCU_TYPE_USB);
-
- data += size;
- len -= size;
-
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_POL_GPIO_CTRL);
- ocp_data |= POL_GPHY_PATCH;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_POL_GPIO_CTRL, ocp_data);
-
- for (i = 0; i < 1000; i++) {
- if (!(ocp_read_word(tp, MCU_TYPE_PLA, PLA_POL_GPIO_CTRL) & POL_GPHY_PATCH))
- break;
- }
-
- if (i == 1000) {
- dev_err(&tp->intf->dev, "ram code speedup mode timeout\n");
- break;
- }
- }
-
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, tp->ocp_base);
- rtl_phy_patch_request(tp, false, wait);
-
- if (sram_read(tp, SRAM_GPHY_FW_VER) == __le16_to_cpu(phy->version))
- dev_dbg(&tp->intf->dev, "successfully applied %s\n", phy->info);
- else
- dev_err(&tp->intf->dev, "ram code speedup mode fail\n");
-}
-
-static int rtl8152_fw_phy_ver(struct r8152 *tp, struct fw_phy_ver *phy_ver)
-{
- u16 ver_addr, ver;
-
- ver_addr = __le16_to_cpu(phy_ver->ver.addr);
- ver = __le16_to_cpu(phy_ver->ver.data);
-
- if (sram_read(tp, ver_addr) >= ver) {
- dev_dbg(&tp->intf->dev, "PHY firmware has been the newest\n");
- return 0;
- }
-
- sram_write(tp, ver_addr, ver);
-
- dev_dbg(&tp->intf->dev, "PHY firmware version %x\n", ver);
-
- return ver;
-}
-
-static void rtl8152_fw_phy_fixup(struct r8152 *tp, struct fw_phy_fixup *fix)
-{
- u16 addr, data;
-
- addr = __le16_to_cpu(fix->setting.addr);
- data = ocp_reg_read(tp, addr);
-
- switch (__le16_to_cpu(fix->bit_cmd)) {
- case FW_FIXUP_AND:
- data &= __le16_to_cpu(fix->setting.data);
- break;
- case FW_FIXUP_OR:
- data |= __le16_to_cpu(fix->setting.data);
- break;
- case FW_FIXUP_NOT:
- data &= ~__le16_to_cpu(fix->setting.data);
- break;
- case FW_FIXUP_XOR:
- data ^= __le16_to_cpu(fix->setting.data);
- break;
- default:
- return;
- }
-
- ocp_reg_write(tp, addr, data);
-
- dev_dbg(&tp->intf->dev, "applied ocp %x %x\n", addr, data);
-}
-
-static void rtl8152_fw_phy_union_apply(struct r8152 *tp, struct fw_phy_union *phy)
-{
- __le16 *data;
- u32 length;
- int i, num;
-
- num = phy->pre_num;
- for (i = 0; i < num; i++)
- sram_write(tp, __le16_to_cpu(phy->pre_set[i].addr),
- __le16_to_cpu(phy->pre_set[i].data));
-
- length = __le32_to_cpu(phy->blk_hdr.length);
- length -= __le16_to_cpu(phy->fw_offset);
- num = length / 2;
- data = (__le16 *)((u8 *)phy + __le16_to_cpu(phy->fw_offset));
-
- ocp_reg_write(tp, OCP_SRAM_ADDR, __le16_to_cpu(phy->fw_reg));
- for (i = 0; i < num; i++)
- ocp_reg_write(tp, OCP_SRAM_DATA, __le16_to_cpu(data[i]));
-
- num = phy->bp_num;
- for (i = 0; i < num; i++)
- sram_write(tp, __le16_to_cpu(phy->bp[i].addr), __le16_to_cpu(phy->bp[i].data));
-
- if (phy->bp_num && phy->bp_en.addr)
- sram_write(tp, __le16_to_cpu(phy->bp_en.addr), __le16_to_cpu(phy->bp_en.data));
-
- dev_dbg(&tp->intf->dev, "successfully applied %s\n", phy->info);
+ r8153b_u1u2en(tp, true);
+ }
}
-static void rtl8152_fw_phy_nc_apply(struct r8152 *tp, struct fw_phy_nc *phy)
+static void rtl8153c_runtime_enable(struct r8152 *tp, bool enable)
{
- u16 mode_reg, bp_index;
- u32 length, i, num;
- __le16 *data;
-
- mode_reg = __le16_to_cpu(phy->mode_reg);
- sram_write(tp, mode_reg, __le16_to_cpu(phy->mode_pre));
- sram_write(tp, __le16_to_cpu(phy->ba_reg),
- __le16_to_cpu(phy->ba_data));
-
- length = __le32_to_cpu(phy->blk_hdr.length);
- length -= __le16_to_cpu(phy->fw_offset);
- num = length / 2;
- data = (__le16 *)((u8 *)phy + __le16_to_cpu(phy->fw_offset));
-
- ocp_reg_write(tp, OCP_SRAM_ADDR, __le16_to_cpu(phy->fw_reg));
- for (i = 0; i < num; i++)
- ocp_reg_write(tp, OCP_SRAM_DATA, __le16_to_cpu(data[i]));
-
- sram_write(tp, __le16_to_cpu(phy->patch_en_addr),
- __le16_to_cpu(phy->patch_en_value));
-
- bp_index = __le16_to_cpu(phy->bp_start);
- num = __le16_to_cpu(phy->bp_num);
- for (i = 0; i < num; i++) {
- sram_write(tp, bp_index, __le16_to_cpu(phy->bp[i]));
- bp_index += 2;
+ if (enable) {
+ r8153_queue_wake(tp, true);
+ r8153b_u1u2en(tp, false);
+ r8153_u2p3en(tp, false);
+ rtl_runtime_suspend_enable(tp, true);
+ r8153c_ups_en(tp, true);
+ } else {
+ r8153c_ups_en(tp, false);
+ r8153_queue_wake(tp, false);
+ rtl_runtime_suspend_enable(tp, false);
+ r8153b_u1u2en(tp, true);
}
-
- sram_write(tp, mode_reg, __le16_to_cpu(phy->mode_post));
-
- dev_dbg(&tp->intf->dev, "successfully applied %s\n", phy->info);
}
-static void rtl8152_fw_mac_apply(struct r8152 *tp, struct fw_mac *mac)
+static void rtl8156_runtime_enable(struct r8152 *tp, bool enable)
{
- u16 bp_en_addr, bp_index, type, bp_num, fw_ver_reg;
- u32 length;
- u8 *data;
- int i;
-
- switch (__le32_to_cpu(mac->blk_hdr.type)) {
- case RTL_FW_PLA:
- type = MCU_TYPE_PLA;
- break;
- case RTL_FW_USB:
- type = MCU_TYPE_USB;
- break;
- default:
- return;
- }
-
- fw_ver_reg = __le16_to_cpu(mac->fw_ver_reg);
- if (fw_ver_reg && ocp_read_byte(tp, MCU_TYPE_USB, fw_ver_reg) >= mac->fw_ver_data) {
- dev_dbg(&tp->intf->dev, "%s firmware has been the newest\n", type ? "PLA" : "USB");
- return;
- }
-
- rtl_clear_bp(tp, type);
-
- /* Enable backup/restore of MACDBG. This is required after clearing PLA
- * break points and before applying the PLA firmware.
- */
- if (tp->version == RTL_VER_04 && type == MCU_TYPE_PLA &&
- !(ocp_read_word(tp, MCU_TYPE_PLA, PLA_MACDBG_POST) & DEBUG_OE)) {
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MACDBG_PRE, DEBUG_LTSSM);
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MACDBG_POST, DEBUG_LTSSM);
- }
-
- length = __le32_to_cpu(mac->blk_hdr.length);
- length -= __le16_to_cpu(mac->fw_offset);
-
- data = (u8 *)mac;
- data += __le16_to_cpu(mac->fw_offset);
-
- generic_ocp_write(tp, __le16_to_cpu(mac->fw_reg), 0xff, length, data,
- type);
-
- ocp_write_word(tp, type, __le16_to_cpu(mac->bp_ba_addr),
- __le16_to_cpu(mac->bp_ba_value));
-
- bp_index = __le16_to_cpu(mac->bp_start);
- bp_num = __le16_to_cpu(mac->bp_num);
- for (i = 0; i < bp_num; i++) {
- ocp_write_word(tp, type, bp_index, __le16_to_cpu(mac->bp[i]));
- bp_index += 2;
+ if (enable) {
+ r8153_queue_wake(tp, true);
+ r8153b_u1u2en(tp, false);
+ r8153_u2p3en(tp, false);
+ rtl_runtime_suspend_enable(tp, true);
+ } else {
+ r8153_queue_wake(tp, false);
+ rtl_runtime_suspend_enable(tp, false);
+ r8153_u2p3en(tp, true);
+ if (tp->udev->speed >= USB_SPEED_SUPER)
+ r8153b_u1u2en(tp, true);
}
-
- bp_en_addr = __le16_to_cpu(mac->bp_en_addr);
- if (bp_en_addr)
- ocp_write_word(tp, type, bp_en_addr,
- __le16_to_cpu(mac->bp_en_value));
-
- if (fw_ver_reg)
- ocp_write_byte(tp, MCU_TYPE_USB, fw_ver_reg,
- mac->fw_ver_data);
-
- dev_dbg(&tp->intf->dev, "successfully applied %s\n", mac->info);
}
-static void rtl8152_apply_firmware(struct r8152 *tp, bool power_cut)
+static void r8153_teredo_off(struct r8152 *tp)
{
- struct rtl_fw *rtl_fw = &tp->rtl_fw;
- const struct firmware *fw;
- struct fw_header *fw_hdr;
- struct fw_phy_patch_key *key;
- u16 key_addr = 0;
- int i, patch_phy = 1;
-
- if (IS_ERR_OR_NULL(rtl_fw->fw))
- return;
-
- fw = rtl_fw->fw;
- fw_hdr = (struct fw_header *)fw->data;
-
- if (rtl_fw->pre_fw)
- rtl_fw->pre_fw(tp);
-
- for (i = offsetof(struct fw_header, blocks); i < fw->size;) {
- struct fw_block *block = (struct fw_block *)&fw->data[i];
+ u32 ocp_data;
- switch (__le32_to_cpu(block->type)) {
- case RTL_FW_END:
- goto post_fw;
- case RTL_FW_PLA:
- case RTL_FW_USB:
- rtl8152_fw_mac_apply(tp, (struct fw_mac *)block);
- break;
- case RTL_FW_PHY_START:
- if (!patch_phy)
- break;
- key = (struct fw_phy_patch_key *)block;
- key_addr = __le16_to_cpu(key->key_reg);
- rtl_pre_ram_code(tp, key_addr, __le16_to_cpu(key->key_data), !power_cut);
- break;
- case RTL_FW_PHY_STOP:
- if (!patch_phy)
- break;
- WARN_ON(!key_addr);
- rtl_post_ram_code(tp, key_addr, !power_cut);
- break;
- case RTL_FW_PHY_NC:
- rtl8152_fw_phy_nc_apply(tp, (struct fw_phy_nc *)block);
- break;
- case RTL_FW_PHY_VER:
- patch_phy = rtl8152_fw_phy_ver(tp, (struct fw_phy_ver *)block);
- break;
- case RTL_FW_PHY_UNION_NC:
- case RTL_FW_PHY_UNION_NC1:
- case RTL_FW_PHY_UNION_NC2:
- case RTL_FW_PHY_UNION_UC2:
- case RTL_FW_PHY_UNION_UC:
- case RTL_FW_PHY_UNION_MISC:
- if (patch_phy)
- rtl8152_fw_phy_union_apply(tp, (struct fw_phy_union *)block);
- break;
- case RTL_FW_PHY_FIXUP:
- if (patch_phy)
- rtl8152_fw_phy_fixup(tp, (struct fw_phy_fixup *)block);
- break;
- case RTL_FW_PHY_SPEED_UP:
- rtl_ram_code_speed_up(tp, (struct fw_phy_speed_up *)block, !power_cut);
- break;
- default:
- break;
- }
+ switch (tp->version) {
+ case RTL_VER_01:
+ case RTL_VER_02:
+ case RTL_VER_03:
+ case RTL_VER_04:
+ case RTL_VER_05:
+ case RTL_VER_06:
+ case RTL_VER_07:
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG);
+ ocp_data &= ~(TEREDO_SEL | TEREDO_RS_EVENT_MASK |
+ OOB_TEREDO_EN);
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, ocp_data);
+ break;
- i += ALIGN(__le32_to_cpu(block->length), 8);
+ case RTL_VER_08:
+ case RTL_VER_09:
+ case RTL_TEST_01:
+ case RTL_VER_10:
+ case RTL_VER_11:
+ case RTL_VER_12:
+ case RTL_VER_13:
+ case RTL_VER_14:
+ case RTL_VER_15:
+ default:
+ /* The bit 0 ~ 7 are relative with teredo settings. They are
+ * W1C (write 1 to clear), so set all 1 to disable it.
+ */
+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, 0xff);
+ break;
}
-post_fw:
- if (rtl_fw->post_fw)
- rtl_fw->post_fw(tp);
-
- strscpy(rtl_fw->version, fw_hdr->version, RTL_VER_SIZE);
- dev_info(&tp->intf->dev, "load %s successfully\n", rtl_fw->version);
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_WDT6_CTRL, WDT6_SET_MODE);
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_REALWOW_TIMER, 0);
+ ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TEREDO_TIMER, 0);
}
-static void rtl8152_release_firmware(struct r8152 *tp)
+static void rtl_reset_bmu(struct r8152 *tp)
{
- struct rtl_fw *rtl_fw = &tp->rtl_fw;
+ u32 ocp_data;
- if (!IS_ERR_OR_NULL(rtl_fw->fw)) {
- release_firmware(rtl_fw->fw);
- rtl_fw->fw = NULL;
- }
+ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_BMU_RESET);
+ ocp_data &= ~(BMU_RESET_EP_IN | BMU_RESET_EP_OUT);
+ ocp_write_byte(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data);
+ ocp_data |= BMU_RESET_EP_IN | BMU_RESET_EP_OUT;
+ ocp_write_byte(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data);
}
-static int rtl8152_request_firmware(struct r8152 *tp)
+int rtl_phy_patch_request(struct r8152 *tp, bool request, bool wait)
{
- struct rtl_fw *rtl_fw = &tp->rtl_fw;
- long rc;
+ u16 data, check;
+ int i;
- if (rtl_fw->fw || !rtl_fw->fw_name) {
- dev_info(&tp->intf->dev, "skip request firmware\n");
- rc = 0;
- goto result;
+ data = ocp_reg_read(tp, OCP_PHY_PATCH_CMD);
+ if (request) {
+ data |= PATCH_REQUEST;
+ check = 0;
+ } else {
+ data &= ~PATCH_REQUEST;
+ check = PATCH_READY;
}
+ ocp_reg_write(tp, OCP_PHY_PATCH_CMD, data);
- rc = request_firmware(&rtl_fw->fw, rtl_fw->fw_name, &tp->intf->dev);
- if (rc < 0)
- goto result;
-
- rc = rtl8152_check_firmware(tp, rtl_fw);
- if (rc < 0)
- release_firmware(rtl_fw->fw);
-
-result:
- if (rc) {
- rtl_fw->fw = ERR_PTR(rc);
+ for (i = 0; wait && i < 5000; i++) {
+ u32 ocp_data;
- dev_warn(&tp->intf->dev,
- "unable to load firmware patch %s (%ld)\n",
- rtl_fw->fw_name, rc);
+ usleep_range(1000, 2000);
+ ocp_data = ocp_reg_read(tp, OCP_PHY_PATCH_STAT);
+ if ((ocp_data & PATCH_READY) ^ check)
+ break;
}
- return rc;
+ if (request && wait &&
+ !(ocp_reg_read(tp, OCP_PHY_PATCH_STAT) & PATCH_READY)) {
+ dev_err(&tp->intf->dev, "PHY patch request fail\n");
+ rtl_phy_patch_request(tp, false, false);
+ return -ETIME;
+ } else {
+ return 0;
+ }
}
static void r8152_aldps_en(struct r8152 *tp, bool enable)
@@ -5432,156 +3259,6 @@ static void r8152b_enter_oob(struct r8152 *tp)
ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
}
-static int r8153_pre_firmware_1(struct r8152 *tp)
-{
- int i;
-
- /* Wait till the WTD timer is ready. It would take at most 104 ms. */
- for (i = 0; i < 104; i++) {
- u32 ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_WDT1_CTRL);
-
- if (!(ocp_data & WTD1_EN))
- break;
- usleep_range(1000, 2000);
- }
-
- return 0;
-}
-
-static int r8153_post_firmware_1(struct r8152 *tp)
-{
- /* set USB_BP_4 to support USB_SPEED_SUPER only */
- if (ocp_read_byte(tp, MCU_TYPE_USB, USB_CSTMR) & FORCE_SUPER)
- ocp_write_word(tp, MCU_TYPE_USB, USB_BP_4, BP4_SUPER_ONLY);
-
- /* reset UPHY timer to 36 ms */
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_UPHY_TIMER, 36000 / 16);
-
- return 0;
-}
-
-static int r8153_pre_firmware_2(struct r8152 *tp)
-{
- u32 ocp_data;
-
- r8153_pre_firmware_1(tp);
-
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN0);
- ocp_data &= ~FW_FIX_SUSPEND;
- ocp_write_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN0, ocp_data);
-
- return 0;
-}
-
-static int r8153_post_firmware_2(struct r8152 *tp)
-{
- u32 ocp_data;
-
- /* enable bp0 if support USB_SPEED_SUPER only */
- if (ocp_read_byte(tp, MCU_TYPE_USB, USB_CSTMR) & FORCE_SUPER) {
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_BP_EN);
- ocp_data |= BIT(0);
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_BP_EN, ocp_data);
- }
-
- /* reset UPHY timer to 36 ms */
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_UPHY_TIMER, 36000 / 16);
-
- /* enable U3P3 check, set the counter to 4 */
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, U3P3_CHECK_EN | 4);
-
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN0);
- ocp_data |= FW_FIX_SUSPEND;
- ocp_write_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN0, ocp_data);
-
- ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_USB2PHY);
- ocp_data |= USB2PHY_L1 | USB2PHY_SUSPEND;
- ocp_write_byte(tp, MCU_TYPE_USB, USB_USB2PHY, ocp_data);
-
- return 0;
-}
-
-static int r8153_post_firmware_3(struct r8152 *tp)
-{
- u32 ocp_data;
-
- ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_USB2PHY);
- ocp_data |= USB2PHY_L1 | USB2PHY_SUSPEND;
- ocp_write_byte(tp, MCU_TYPE_USB, USB_USB2PHY, ocp_data);
-
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1);
- ocp_data |= FW_IP_RESET_EN;
- ocp_write_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1, ocp_data);
-
- return 0;
-}
-
-static int r8153b_pre_firmware_1(struct r8152 *tp)
-{
- /* enable fc timer and set timer to 1 second. */
- ocp_write_word(tp, MCU_TYPE_USB, USB_FC_TIMER,
- CTRL_TIMER_EN | (1000 / 8));
-
- return 0;
-}
-
-static int r8153b_post_firmware_1(struct r8152 *tp)
-{
- u32 ocp_data;
-
- /* enable bp0 for RTL8153-BND */
- ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_1);
- if (ocp_data & BND_MASK) {
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_BP_EN);
- ocp_data |= BIT(0);
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_BP_EN, ocp_data);
- }
-
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_CTRL);
- ocp_data |= FLOW_CTRL_PATCH_OPT;
- ocp_write_word(tp, MCU_TYPE_USB, USB_FW_CTRL, ocp_data);
-
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK);
- ocp_data |= FC_PATCH_TASK;
- ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
-
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1);
- ocp_data |= FW_IP_RESET_EN;
- ocp_write_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1, ocp_data);
-
- return 0;
-}
-
-static int r8153c_post_firmware_1(struct r8152 *tp)
-{
- u32 ocp_data;
-
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_CTRL);
- ocp_data |= FLOW_CTRL_PATCH_2;
- ocp_write_word(tp, MCU_TYPE_USB, USB_FW_CTRL, ocp_data);
-
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK);
- ocp_data |= FC_PATCH_TASK;
- ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
-
- return 0;
-}
-
-static int r8156a_post_firmware_1(struct r8152 *tp)
-{
- u32 ocp_data;
-
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1);
- ocp_data |= FW_IP_RESET_EN;
- ocp_write_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1, ocp_data);
-
- /* Modify U3PHY parameter for compatibility issue */
- ocp_write_dword(tp, MCU_TYPE_USB, USB_UPHY3_MDCMDIO, 0x4026840e);
- ocp_write_dword(tp, MCU_TYPE_USB, USB_UPHY3_MDCMDIO, 0x4001acc9);
-
- return 0;
-}
-
static void r8153_aldps_en(struct r8152 *tp, bool enable)
{
u16 data;
@@ -7273,6 +4950,7 @@ static void r8156_hw_phy_cfg(struct r8152 *tp)
ocp_reg_write(tp, 0xbd2c, data);
break;
case RTL_VER_11:
+ /* 2.5G INRX */
data = ocp_reg_read(tp, 0xad16);
data |= 0x3ff;
ocp_reg_write(tp, 0xad16, data);
@@ -8216,7 +5894,7 @@ static int rtl8152_post_reset(struct usb_interface *intf)
/* reset the MAC address in case of policy change */
if (determine_ethernet_addr(tp, &sa) >= 0) {
rtnl_lock();
- dev_set_mac_address (tp->netdev, &sa, NULL);
+ dev_set_mac_address(tp->netdev, &sa, NULL);
rtnl_unlock();
}
@@ -9337,14 +7015,6 @@ static int rtl_ops_init(struct r8152 *tp)
return ret;
}
-#define FIRMWARE_8153A_2 "rtl_nic/rtl8153a-2.fw"
-#define FIRMWARE_8153A_3 "rtl_nic/rtl8153a-3.fw"
-#define FIRMWARE_8153A_4 "rtl_nic/rtl8153a-4.fw"
-#define FIRMWARE_8153B_2 "rtl_nic/rtl8153b-2.fw"
-#define FIRMWARE_8153C_1 "rtl_nic/rtl8153c-1.fw"
-#define FIRMWARE_8156A_2 "rtl_nic/rtl8156a-2.fw"
-#define FIRMWARE_8156B_2 "rtl_nic/rtl8156b-2.fw"
-
MODULE_FIRMWARE(FIRMWARE_8153A_2);
MODULE_FIRMWARE(FIRMWARE_8153A_3);
MODULE_FIRMWARE(FIRMWARE_8153A_4);
@@ -9353,50 +7023,6 @@ MODULE_FIRMWARE(FIRMWARE_8153C_1);
MODULE_FIRMWARE(FIRMWARE_8156A_2);
MODULE_FIRMWARE(FIRMWARE_8156B_2);
-static int rtl_fw_init(struct r8152 *tp)
-{
- struct rtl_fw *rtl_fw = &tp->rtl_fw;
-
- switch (tp->version) {
- case RTL_VER_04:
- rtl_fw->fw_name = FIRMWARE_8153A_2;
- rtl_fw->pre_fw = r8153_pre_firmware_1;
- rtl_fw->post_fw = r8153_post_firmware_1;
- break;
- case RTL_VER_05:
- rtl_fw->fw_name = FIRMWARE_8153A_3;
- rtl_fw->pre_fw = r8153_pre_firmware_2;
- rtl_fw->post_fw = r8153_post_firmware_2;
- break;
- case RTL_VER_06:
- rtl_fw->fw_name = FIRMWARE_8153A_4;
- rtl_fw->post_fw = r8153_post_firmware_3;
- break;
- case RTL_VER_09:
- rtl_fw->fw_name = FIRMWARE_8153B_2;
- rtl_fw->pre_fw = r8153b_pre_firmware_1;
- rtl_fw->post_fw = r8153b_post_firmware_1;
- break;
- case RTL_VER_11:
- rtl_fw->fw_name = FIRMWARE_8156A_2;
- rtl_fw->post_fw = r8156a_post_firmware_1;
- break;
- case RTL_VER_13:
- case RTL_VER_15:
- rtl_fw->fw_name = FIRMWARE_8156B_2;
- break;
- case RTL_VER_14:
- rtl_fw->fw_name = FIRMWARE_8153C_1;
- rtl_fw->pre_fw = r8153b_pre_firmware_1;
- rtl_fw->post_fw = r8153c_post_firmware_1;
- break;
- default:
- break;
- }
-
- return 0;
-}
-
u8 rtl8152_get_version(struct usb_interface *intf)
{
struct usb_device *udev = interface_to_usbdev(intf);
--
2.26.3
Powered by blists - more mailing lists