[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210714193800.52097-53-sashal@kernel.org>
Date: Wed, 14 Jul 2021 15:37:05 -0400
From: Sasha Levin <sashal@...nel.org>
To: linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc: Vinod Koul <vkoul@...nel.org>,
Robert Foss <robert.foss@...aro.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Sasha Levin <sashal@...nel.org>, linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org
Subject: [PATCH AUTOSEL 5.13 053/108] arm64: dts: qcom: sm8350: fix the node unit addresses
From: Vinod Koul <vkoul@...nel.org>
[ Upstream commit 1dee9e3b0997fef7170f7ea2d8eab47d0cd334d8 ]
Some node unit addresses were put wrongly in the dts, resulting in
below warning when run with W=1
arch/arm64/boot/dts/qcom/sm8350.dtsi:693.34-702.5: Warning (simple_bus_reg): /soc@...hermal-sensor@...2000: simple-bus unit address format error, expected "c263000"
arch/arm64/boot/dts/qcom/sm8350.dtsi:704.34-713.5: Warning (simple_bus_reg): /soc@...hermal-sensor@...3000: simple-bus unit address format error, expected "c265000"
arch/arm64/boot/dts/qcom/sm8350.dtsi:1180.32-1185.5: Warning (simple_bus_reg): /soc@...nterconnect@...0000: simple-bus unit address format error, expected "90c0000"
Fix by correcting to the correct address as given in reg node
Reviewed-by: Robert Foss <robert.foss@...aro.org>
Signed-off-by: Vinod Koul <vkoul@...nel.org>
Link: https://lore.kernel.org/r/20210513060733.382420-1-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
arch/arm64/boot/dts/qcom/sm8350.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index ed0b51bc03ea..a2382eb8619b 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -689,7 +689,7 @@ pdc: interrupt-controller@...0000 {
interrupt-controller;
};
- tsens0: thermal-sensor@...2000 {
+ tsens0: thermal-sensor@...3000 {
compatible = "qcom,sm8350-tsens", "qcom,tsens-v2";
reg = <0 0x0c263000 0 0x1ff>, /* TM */
<0 0x0c222000 0 0x8>; /* SROT */
@@ -700,7 +700,7 @@ tsens0: thermal-sensor@...2000 {
#thermal-sensor-cells = <1>;
};
- tsens1: thermal-sensor@...3000 {
+ tsens1: thermal-sensor@...5000 {
compatible = "qcom,sm8350-tsens", "qcom,tsens-v2";
reg = <0 0x0c265000 0 0x1ff>, /* TM */
<0 0x0c223000 0 0x8>; /* SROT */
@@ -1176,7 +1176,7 @@ usb_2_ssphy: phy@...be00 {
};
};
- dc_noc: interconnect@...0000 {
+ dc_noc: interconnect@...0000 {
compatible = "qcom,sm8350-dc-noc";
reg = <0 0x090c0000 0 0x4200>;
#interconnect-cells = <1>;
--
2.30.2
Powered by blists - more mailing lists