linux-kernel - [PATCH AUTOSEL 5.12 057/102] ARM: dts: stm32: fix stm32mp157c-odyssey card detect pin

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20210714194036.53141-57-sashal@kernel.org>
Date:   Wed, 14 Jul 2021 15:39:50 -0400
From:   Sasha Levin <sashal@...nel.org>
To:     linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc:     Grzegorz Szymaszek <gszymaszek@...rt.pl>,
        Alexandre Torgue <alexandre.torgue@...s.st.com>,
        Sasha Levin <sashal@...nel.org>, devicetree@...r.kernel.org,
        linux-stm32@...md-mailman.stormreply.com,
        linux-arm-kernel@...ts.infradead.org
Subject: [PATCH AUTOSEL 5.12 057/102] ARM: dts: stm32: fix stm32mp157c-odyssey card detect pin

From: Grzegorz Szymaszek <gszymaszek@...rt.pl>

[ Upstream commit 0171b07373cc8c2815ca5fa79a7308fdefa54ca4 ]

The microSD card detect pin is physically connected to the MPU pin PI3.
The Device Tree configuration of the card detect pin was wrong—it was
set to pin PB7 instead. If such configuration was used, the kernel would
hang on “Waiting for root device” when booting from a microSD card.

Signed-off-by: Grzegorz Szymaszek <gszymaszek@...rt.pl>
Signed-off-by: Alexandre Torgue <alexandre.torgue@...s.st.com>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
 arch/arm/boot/dts/stm32mp157c-odyssey.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey.dts b/arch/arm/boot/dts/stm32mp157c-odyssey.dts
index a7ffec8f1516..be1dd5e9e744 100644
--- a/arch/arm/boot/dts/stm32mp157c-odyssey.dts
+++ b/arch/arm/boot/dts/stm32mp157c-odyssey.dts
@@ -64,7 +64,7 @@ &sdmmc1 {
 	pinctrl-0 = <&sdmmc1_b4_pins_a>;
 	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
 	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
-	cd-gpios = <&gpiob 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	cd-gpios = <&gpioi 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
 	disable-wp;
 	st,neg-edge;
 	bus-width = <4>;
-- 
2.30.2